Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
RFID Qwiic Kit with ID-12LA 125kHz Reader
SKU: SF-KIT-15209 | Brand: SparkFun
This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Read...
Out of stock
RTK Facet Centimetre-Grade GNSS Surveyor
SKU: SF-GPS-19984 | Brand: SparkFun
The RTK Facet is an all-in-one high-precision GNSS surveying device designed to deliver centimetre-grade position measurements with a simplified field workflow. It combines the core electronics, antenna and logging ha...
Out of stock
PAV3015 Air Velocity Sensor (0–15 m/s, I2C)
SKU: DF-SEN0639 | Brand: DFRobot
This compact digital anemometer measures air velocity for embedded electronics and intelligent control systems. It is built around the Posifa PAV3015D thermal sensing element, using temperature differences across a th...
Out of stock
Qwiic 24-Bit 4-Channel ADC Breakout - ADS1219
SKU: SF-SEN-27544 | Brand: SparkFun
When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channe...
Out of stock
LIS3DH Micro Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29529 | Brand: SparkFun
This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for ...
Out of stock
DFRobot SEN0704 6x6 Flexible Tactile Pressure Sensor - UART
SKU: DF-SEN0704 | Brand: DFRobot
This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...
Out of stock
DFRobot SEN0710 RS485 Industrial Turbidity Sensor (0-1000 NTU)
SKU: DF-SEN0710 | Brand: DFRobot
Designed for industrial water-quality monitoring, this turbidity probe measures suspended particles using the 90° light scattering principle. The probe and housing are integrated into a compact IP68 unit, so it can be...
Out of stock
DFRobot SEN0658 9-in-1 Ultrasonic RS485 Weather Sensor
SKU: DF-SEN0658 | Brand: DFRobot
Bring multiple environmental measurements into one rugged field sensor for Arduino, IoT and monitoring projects. This 9-in-1 unit measures ultrasonic wind speed and direction, air temperature, relative humidity, atmos...
Out of stock
Cup Anemometer with RJ11 Connector
SKU: SF-SEN-28869 | Brand: SparkFun
This anemometer measures wind speed using rotating cups that turn an enclosed magnet. On each rotation, the magnet closes a reed switch, producing a simple pulse output that can be counted by your electronics.The outp...
Out of stock
SparkPNT RTK Facet mosaic GNSS Receiver
SKU: SF-GPS-29688 | Brand: SparkFun
The RTK Facet mosaic is a high-precision GNSS receiver for geolocation, surveying and GIS work. It uses Septentrio’s multi-band mosaic-X5 receiver and can deliver centimetre-grade positioning with RTK support.Connect ...
Out of stock
RTK Surveying Kit with ZED-F9P GNSS Receiver
SKU: SF-GPS-17370 | Brand: SparkFun
This field-ready RTK kit is built for centimetre-level global positioning measurements using GNSS RTK. The RTK Surveyor is a Bluetooth® enabled multi-band GNSS receiver based on the ESP32 from Espressif and the ZED-F9...
Out of stock
MyoWare 2 Muscle Sensor Wireless Kit
SKU: SF-KIT-27922 | Brand: SparkFun
Build and test wireless muscle-sensing projects with this Arduino-compatible electromyography (EMG) kit from the MyoWare 2 ecosystem. It centres on the MyoWare 2 Muscle Sensor, which measures muscle activity from the ...
Out of stock
MyoWare 2 Muscle Sensor Basic Kit
SKU: SF-KIT-27921 | Brand: SparkFun
This all-in-one MyoWare 2 electromyography (EMG) kit gives you the essentials for measuring and visualising muscle activity. It is Arduino-compatible, but the included setup is designed to follow the standalone exampl...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
