Geophysical & Radiation Sensors

SKU: AF-1766 | Brand: Adafruit

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin....

SKU: DF-DFR0052 | Brand: DFRobot

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the...

SKU: LB-RADI | Brand: Little Bird

FS-600 is a small height radiation detector. Its main function is to monitor X-ray, ♥-ray and ⑤-ray. The detector of this instrument is an energy compensation Geiger counter (hereinafter referred to as tube). It is...

SKU: DF-SEN0463 | Brand: DFRobot

This Gravity Geiger Counter Module detects ionising radiation — including nuclear radiation, X-rays, and cosmic rays — using a large M4011 Geiger-Müller tube. When ionising particles pass through the tube, the module ...

SKU: DF-SEN0209 | Brand: DFRobot

This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact and touch. The film is a flexible compo...

SKU: AF-4081 | Brand: Adafruit

This flat vibration switch is a low-sensitivity, directional trigger that closes its circuit when bumped from the side. Inside, a soft spring coiled around a metal pin makes contact when vibration or impact occurs, ac...

SKU: AF-483 | Brand: Adafruit

Detect particles and/or make a cool random number generator with this handsome Geiger counter kit. This easy-to-make pack of parts turns a simple Geiger-Muller tube (included) into a portable blink, beeping radiati...

SKU: SF-SEN-11744 | Brand: SparkFun

Need to put your finger on the pulse of the Earth? Did I just blow your mind? A geophone works by translating ground movement into voltage, which can easily be read by a microcontroller. The SM-24 geophone element is ...

SKU: DF-DFR0027 | Brand: DFRobot

What's the simplest way to check vibration with Arduino? Use a vibration sensor from DFRobot. You can directly plug it on our IO Expesion Shield V7. Just vibrate this sensor, Arduino can receive a digital signal. It'...