Motors (DC, stepper, servo)

SKU: AF-5592 | Brand: Adafruit

This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect for plug-and-play support with any of our boards with alligator-clip-friendly input/output pins, li...

SKU: PL-4760 | Brand: Pololu

This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors and cables are not...

SKU: M5-U075 | Brand: Little Bird

DescriptionSERVO HAT as the name suggests, is a servo motor module with the new and upgraded "ES9251II" digital servo，This comes with 145°±10° range of motion and can be controlled by PWM signals. The signal pin ...

SKU: M5-M012+M013+A024 | Brand: Little Bird

The M5Stack Stepmotor Module is designed for stepper motor control, capable of driving up to 3 stepper motors with GRBL firmware. Built around the MEGA328P microcontroller (pre-flashed with GRBL), it communicates with...

SKU: M5-U059 | Brand: Little Bird

DescriptionVibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen be...

SKU: M5-M013 | Brand: Little Bird

Description STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control. It is built with MEGA328P has been flashed&nbsp...

SKU: SF-DEV-15316 | Brand: SparkFun

Control up to 16 servo motors from your Raspberry Pi over I2C with the SparkFun Servo pHAT. By using I2C for PWM generation, this HAT keeps all your GPIO pins free for other tasks. It also provides a serial terminal c...

SKU: FR-GOLDSPARK | Brand: Little Bird

FingerTech's Gold Spark motors are great for hobby use and in competition robots such as mini-sumo and line following.  If your application will be close to or exceeding the torque limits listed below, check o...

SKU: AF-3782 | Brand: Adafruit

Simple snap-on encoder wheels for TT gearbox motors. These injection-moulded plastic discs attach to the opposite end of the motor shaft from your wheel, letting you measure rotation speed using a photo interrupter se...

SKU: DF-DRI0044-A | Brand: DFRobot

The DFRobot 2×1.2A DC Motor Driver with Gravity Connector is a compact dual-channel motor driver based on the TB6612FNG IC. This version features standard DFRobot Gravity connectors for plug-and-play wiring with Gravi...

SKU: AF-918 | Brand: Adafruit

This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revol...

SKU: PI-COM0807 | Brand: Pimoroni

Our ever popular micro metal gearmotor, now available with a solderless push header shim for ease of prototyping! Connect your motor to your project with some jumper jerky and you're good to go! This gearmotor...

SKU: PI-COM0803 | Brand: Pimoroni

These simple little brackets are the best way to securely mount our micro metal gearmotors to your project, whether it be a robot, a fan, or a pulley system. We've designed the mounting tabs to capture ...

SKU: PI-COM0810 | Brand: Pimoroni

Our ever popular micro metal gearmotor, now available with a solderless push header shim for ease of prototyping! Connect your motor to your project with some jumper jerky and you're good to go! This gearmotor...

SKU: PI-COM0806 | Brand: Pimoroni

Our ever popular micro metal gearmotor, now available with a solderless push header shim for ease of prototyping! Connect your motor to your project with some jumper jerky and you're good to go! This gearmotor...

SKU: PI-COM0802 | Brand: Pimoroni

A miniature brushed DC motor with a 1006:1 metal gearbox and an extended back shaft for attaching optical encoders. This high-ratio gearmotor delivers very low speed with high torque, making it ideal for precision rob...

SKU: PI-COM0800 | Brand: Pimoroni

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80m...

SKU: PR-PIM246 | Brand: Little Bird

These little motors are an ideal plug-and-go solution for your next robot explorer. They even come with adaptors for LEGO® and mounts to attach to your project. Maker Essentials are components and useful bits fo...

SKU: AF-1142 | Brand: Adafruit

This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you...

SKU: PR-PIM036 | Brand: Little Bird

The Motor module is a 298:1 ratio motor that has full speed control, and is bi-directional. It's perfect for driving robots, as a tiny fan, or in LEGO® projects. We have a LEGO® compatible ...