Pololu
25:1 Metal Gearmotor 20Dx41L mm 6V
$35.80
|
Out of stock
A compact 6V brushed DC gearmotor with a 25:1 metal spur gearbox, delivering strong torque in a small form factor. The cylindrical design has a 20mm diameter...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A compact 6V brushed DC gearmotor with a 25:1 metal spur gearbox, delivering strong torque in a small form factor. The cylindrical design has a 20mm diameter, and the D-shaped output shaft is 4mm in diameter extending 18mm from the gearbox face plate.
Key Features
- 25:1 Metal Gearbox – Durable metal spur gears for reliable operation
- 6V Brushed DC Motor – High power-to-size ratio
- Compact Form Factor – 20mm diameter cylindrical body
- D-Shaped Output Shaft – 4mm diameter, 18mm extension for secure mounting
Specifications
- Voltage: 6V
- Gear Ratio: 25:1
- No-Load Speed: 570 RPM
- No-Load Current: 170mA
- Stall Torque: 1.6 kg·cm (22 oz·in)
- Stall Current: 2.9A
- Diameter: 20mm
- Output Shaft: 4mm D-shaped, 18mm long
Ideal For
- Small robotics platforms
- Motorised mechanisms and actuators
- Mobile robot drive systems
- Compact motion control projects
Package Contents
- 1× 25:1 Metal Gearmotor 20Dx41L mm 6V
Find this product in
Robotics & Motion
You might also like
Customers who bought this also bought
High Torque Waterproof Digital Servo with Magnetic Encoder (35KG, 360°, IP54)
$46.35
Four - Channels Motor Shield For Arduino
$6.15
Silicone Cover Stranded-Core Wire - 2m 26AWG White
$2.25
Silicone Cover Stranded-Core Wire - 2m 26AWG Black
$2.25
Silicone Cover Stranded-Core Wire - 2m 26AWG Red
$2.30
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
$21.05
Micro Servo 9g
$5.50
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- kg·cm
- A torque unit often used for hobby servos, meaning how many kilograms of force the servo can hold at a 1 cm arm length. A higher kg·cm rating means the servo can move or hold heavier loads, but power supply current needs may also increase.
- Stall torque
- The maximum twisting force a servo can produce when its output is held still and cannot move. It helps you judge whether the servo is strong enough for a robot joint, steering linkage, or other load.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.