This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank water. It comes with an inlet valv...
View full details
A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, ...
View full details
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil ...
View full details
Does controlling door and cabinet access with the power of Electromagnetism interest you? Excellent! In effect, this latch / lock solenoid is an el...
View full details
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to wor...
View full details
This 12V normally closed solenoid valve controls water flow through a 1/2″ (DN15) inlet and outlet. It remains closed when unpowered and opens when...
View full details
A pack of four coreless micro motors measuring 6 × 14 mm, reaching 55,000 RPM at 3.7V. The longest in the 6 mm diameter range, this variant offers ...
View full details
The DFRobot 2Kg 300° Clutch Servo features built-in clutch protection and electronic overload protection, making it ideal for robotics and model ap...
View full details
The 6V Air Valve (FA0520E) is a 3-port solenoid valve for pneumatic systems, functioning similarly to an electrical relay. It features a common por...
View full details
INTRODUCTION This DC gearmotor has an integrated M4*55mm threaded rod as its output shaft, turn it into a linear actuator. 6V rated voltage...
View full details
The 6 kg 180° Clutch Servo from DFRobot features a built-in clutch mechanism and electronic protection, making it ideal for robotics and mechanical...
View full details
Feature: 0.5°C Ensured Accuracy (+25°C) Suitable for Remote Applications Low Cost Due to Wafer-Level Trimming Operates from 4 to 30 V Less than 60-...
View full details
This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on th...
View full details
Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. Y...
View full details
A compact 9g micro servo with metal gears, delivering 1.8 kgf·cm of torque at 4.8V. The metal gear train provides significantly better durability t...
View full detailsA high-torque coreless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exc...
View full details
A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, ma...
View full details
The 6V Electric Push Rod with 50mm stroke from DFRobot is a compact linear actuator delivering up to 128N of thrust. Despite its small size, it pro...
View full details
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil ...
View full details
The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making i...
View full details
This 5V electromagnet provides 2.5kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off,...
View full details
The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control proje...
View full details
This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much. It can rotate ...
View full details
Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through int...
View full detailsThis general-purpose 130-size hobby motor runs on 3–6V and spins at 4,000–8,000 RPM depending on the input voltage. Its compact size and 2 mm shaft...
View full details
These are the popular 28YBJ-48 geared stepper motors with driver board. The motor and driver are suitable for 5V operation. 4 Phase Current : 1...
View full details
A 20W adjustable DC-DC buck converter module based on the LM2596 step-down regulator, featuring a built-in digital display that shows the output vo...
View full details
EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width...
View full details
Perhaps you've been assembling a new robot friend, adding a computer for a brain and other fun personality touches. Now the time has come to ...
View full details
This IR sensor can detect obstacles in front of it. When an object is detected the green indicator light on the board will light up. There is a lo...
View full details
*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe mot...
View full detailsThis is a 370 DC diaphragm pump for Arduino Automatic Smart Plant Watering Kit 2.1, it could be used on a kettle, stove, water dispenser and other...
View full details
A standard 130-size DC hobby motor with a wider operating range than typical toy motors: 4.5–9V DC instead of the usual 1.5–4.5V. This makes it ide...
View full details
Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors with max...
View full detailsThis tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its lead...
View full details
INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various appl...
View full details
EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make...
View full details
A simple 9V battery holder with a DC barrel connector. Provides a convenient way to mount and connect a 9V battery to your electronics projects. K...
View full details
This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the ...
View full details
A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-c...
View full details
This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for ...
View full details
DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use. This DHT11 Arduino temperature and humidity sensor has ...
View full details
This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature s...
View full detailsThe Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. De...
View full details
This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet condit...
View full details
Digital temperature sensor DS18B20, waterproof case. Working range from -55 to 125 degrees. Resolution 0.5 in range from -10 up to 85 degrees.
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal out...
View full detailsThe Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applic...
View full details
The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B ...
View full detailsThe DHT22 (also known in Australia by RHT03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor come...
View full details
The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidit...
View full details
The Adafruit BME280 Breakout is a precision environmental sensor from Bosch that measures temperature, barometric pressure, and humidity in a singl...
View full details
The Adafruit Sensirion SHT41 is a high-accuracy temperature and humidity sensor with a true I2C interface, part of Sensirion's fourth-generation SH...
View full details
Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or ta...
View full detailsThe HC-SR04 is a widely used ultrasonic distance sensor that measures distances from 2cm to 500cm (approximately 5 metres) with 1cm resolution. It ...
View full detailsReceive data sent via infrared, this module can read the signals sent by most IR remote controls. Pair it with the TX Module to make a universal re...
View full details
Sonar:bit is an ultrasonic module with 3-5V working voltage. It is available to be used to 3.3V or 5V micro-controller system. With only one 3-w...
View full details
The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm...
View full details
This proximity sensor measures reflected infrared(IR) energy to detect the presence of an object within a distance of 10±5mm to 80±20mm. It outputs...
View full details
The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range an...
View full details
This is an Arduino digital infrared distance sensor. It has an adjustable detection range, 0cm - 200cm. It is small, easy to use, assemble, and in...
View full details
The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures...
View full details
This IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required o...
View full details
The VL53L3CX is the latest Time-of-Flight (ToF) product from STMicroelectronics and embeds ST’s third-generation FlightSense technology. With the i...
View full details
The magnetic switch mainly comprises two parts---the inducting end and trigger. The former has a reed switch enclosed inside and there is a cable c...
View full details
The VL53L0X laser range finder is a high-precision distance sensor that based on new Time-of-Flight (ToF) principle. VL53L0X provides accurate d...
View full details
HPS-3D160-U is the newest generation high-performance solid-state LiDAR sensor based on Time-of-Flight(ToF) principle. Equipped with an optimized l...
View full details
This LoRa 433MHz module designed by AI-THINKER, which based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum ...
View full details
A waterproof ultrasonic distance sensor with UART serial output. The A01NYUB measures distance by timing the ultrasonic pulse echo and outputs the ...
View full details
Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, co...
View full details
*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe mot...
View full detailsThis tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its lead...
View full details
Just as small as a fingernail, this 10*2.7mm mini vibration motor features a strong vibration, low noise, easy to embed, and long lifespan. Powe...
View full details
The Buzzer Piezo 20mm is a compact and efficient sound-producing device that is perfect for a variety of electronic projects. With its 20mm diamete...
View full details
Specification:Model: Mini 130 Vibration MotorMotor size: 25*20mmMotor height: 15.3mmVoltage range: DC 3V-6VRated voltage: DC 3.7VRated current: ...
View full details
The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger ...
View full details
This large enclosed piezo element (30 mm diameter) converts vibration to voltage and voltage to vibration, making it useful both as a buzzer for ge...
View full details
The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming ...
View full details
The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simp...
View full details
A 3-inch (77.8 mm) full-range speaker rated at 5 W with a 4 Ω impedance. Compact enough to embed in custom enclosures, arcade cabinets, internet ra...
View full detailsThis is a ball tilt switch. When the switch is vertical the switch is ON. When put horizontal the switch is OFF. All materials are manufactured...
View full details
Features Model: KY-038 Adopt LM393 main chip Electric condenser microphone Features Single channel signal output Low level output signal used for s...
View full details
With the sound module, we can detect the presence of loud sounds. While this module has a microphone on it, our Arduino does not have the brains...
View full details
Listen up! This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of p...
View full detailsDescription This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. ...
View full detailsHuge 10mm through-hole LEDs. Mood-light an entire wall! Features: 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 16,000-2...
View full detailsCheck out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B):...
View full detailsThis 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate volt...
View full details
The LS2299 UV Ultraviolet Ray Detection Sensor is specifically designed for applications requiring high reliability and accuracy in measuring the U...
View full detailsThis is a simple single unit YELLOW E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. T...
View full details
These red flexible LED filament bulbs are perfect for creating unique lighting effects. With a length of 130mm, they provide plenty of light while ...
View full details
A handy workbench box containing five spools of 26 AWG silicone hookup wire in blue, black, green, red, and yellow. The super-flexible silicone ins...
View full details
Light-dependent resistors are electronic components whose resistance changes with light intensity. They are also called LDRs, photoresistors, or ...
View full detailsCheck out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 600-610nm Orange 1.8-...
View full details
These blue flexible LED filament bulbs are perfect for creating unique lighting effects. With a length of 130mm, they provide plenty of light wh...
View full detailsWe're with the squad back at New York's hottest cyberpunk club, Near Field Commune(ication), and it's still got everything, Adabot & the Circui...
View full details
RGB LED module consists of a plug-in full color LED made by R, G, B three pin PWM voltage input can be adjusted section three primary colors (r...
View full details
Alligator clips (also known as crocodile clips) are one of the most useful tools on any maker's workbench. Whether you're testing a circuit, connec...
View full details
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form...
View full details
The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG...
View full details
DFRobot Gravity: MAX30102 heart rate and blood oxygen sensor module integrates the Maxim MAX30102 chip and an MCU with heart rate and blood oxygen ...
View full details
Have your next project be controlled by your muscles with this pack of Muscle Sensor Surface EMG Electrodes! Pair the electrodes with the MyoWar...
View full details
Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simp...
View full detailsDescription HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demand...
View full details
The MAX30102 is integrated pulse oximetry and heart-rate monitor biosensor module based on PPG (PhotoPlethysmoGraphy). It is so small that you c...
View full detailsPulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It can be used by students, artists, athletes, makers, and game & mobil...
View full details
Other Features: Voltage: 3V / 5V; Amplification factor: 330; Wavelength: 609nm; A product for Arduino.1 x Pulse sensor Pulse Heart Rate Sensor Mo...
View full details
This is a capacitive fingerprint sensor with fingerprint collecting, processing, storing, and comparison integrated all-in-one. Taking ID809 high-p...
View full details
Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatible...
View full detailsSecure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simp...
View full details
The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers. This sensor is a pulse sensor wh...
View full details
The GT-NUCL1633K1 is the latest miniature fingerprint sensor with extensive enhancements on power consumption and user flexibility from ADH-Tech...
View full details
This fully integrated capacitive fingerprint sensor provides an efficient way for users to capture, process, store, and match fingerprints. Based o...
View full detailsUsing our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what...
View full details
