Motors (DC, stepper, servo)

SKU: DF-FIT0045 | Brand: DFRobot

A pan-and-tilt servo assembly for horizontal surface mounting, built with two DFRobot DF05BB ball-bearing servos and aluminium brackets. Ideal for camera gimbals, sensor heads, and small remote-controlled robot platfo...

SKU: DF-DFR1224 | Brand: DFRobot

Restore a Maqueen V5 STEM robot after a damaged or jammed drive motor with this official replacement N20 motor accessory kit. It is intended as a repair part for an existing Maqueen V5, rather than an add-on needed wh...

SKU: DF-DFR1225 | Brand: DFRobot

Repair a damaged Maqueen Plus V3 motor without replacing the whole robot. This official DFRobot N20 motor accessory kit is made for quick classroom or project repairs when dust, hair, particles or rough handling have ...

SKU: DF-SER0057 | Brand: DFRobot

This clutch servo is designed for robots, models and other mechanisms where the servo may be pushed, stalled or forced out of position during use. Its clutch function helps protect the servo by allowing it to reset an...

SKU: LB-PMMA19004A001 | Brand: Little Bird

A compact 370 DC diaphragm pump designed for automated plant watering systems and other fluid transfer applications. With a wide operating voltage range of 3–24V, it's easy to integrate with Arduino and other microcon...

SKU: AF-1201 | Brand: Adafruit

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and em...

SKU: PL-3135 | Brand: Pololu

The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB...

SKU: YH-6000300457 | Brand: Little Bird

The gray one is servo with 270°degrees for the construction of angular control projects, such as manipulators, towers.  With the controller board and building blocks, you can control the servo to build various...

SKU: LB-PT7008-12 | Brand: Little Bird

Dimensions: 1.57" x 0.79" x 1.44" (40 x 20 x 44mm) Weight: 38g Operating Speed (4.8V no load) : 0.14sec / 60 degrees Operating Speed (6.0V no load) : 0.11sec / 60 degrees Stall Torque (4.8V): (8 kg...

SKU: PL-2265 | Brand: Pololu

This tiny DC motor has a shaft with an offset mass that vibrates when it rotates. Motors like this are commonly found in cell phones and other devices that use vibration for tactile feedback. The motor has 1.5″ lea...

SKU: LB-EMAX | Brand: Little Bird

Description:Type: Emax ES08MA IISize: 23 x 11.5 x 24 mm (1.25 x.45 x.94in)Weight: 12g / 0.42ozWorking voltage: 4.8V~6.0VWorking current: 200mA/60°Speed: 0.12sec/60o at 4.8V; 0.10sec/60o at 6VTorque: 1.6/2.0 kg.cm ...

SKU: PL-2693 | Brand: Pololu

These universal mounting hubs are designed to work with most 8 mm diameter shafts, including round shafts and “D” shafts. Each of the two included hubs has six mounting holes for M3 screws (not included), letting y...

SKU: AF-4547 | Brand: Adafruit

A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3...

SKU: PL-1083 | Brand: Pololu

These universal aluminium mounting hubs from Pololu are designed to securely couple custom wheels, mechanisms, and other components to 6 mm diameter motor shafts. Each hub features six threaded #4-40 mounting holes fo...

SKU: DF-FIT0794 | Brand: DFRobot

A pack of four coreless micro motors measuring 7 × 20 mm, reaching 50,000 RPM at 3.7V. The largest and most powerful in the coreless micro motor range, these draw 120 mA and feature a 1 mm shaft — delivering the most ...

SKU: AF-4326 | Brand: Adafruit

This tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these s...

SKU: PI-COM0812 | Brand: Pimoroni

These continuous rotation servos are ideal when you need very precise degrees of rotation, to build a dial display for example.  Dimensions: 23.2×12.5×22 mm Weight: 9g Operating speed: 110RPM (4.8V) / 1...

SKU: PR-PIM132 | Brand: Little Bird

This little dingus connects our popular micro metal gearmotors to a standard LEGO® axle - ideal for making your brick creations move autonomously!Injection moulded from snazzy purple plastic they are made in the UK. S...

SKU: LB-PT7009-13 | Brand: Little Bird

This High-Torque MG996R Digital Servo features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features u...

SKU: TB-YM2758 | Brand: Little Bird

A compact 9g micro servo motor ideal for small robotics, pan-and-tilt mechanisms, and Arduino projects. With 1.6 kg·cm of torque and a fast 500°/sec speed, it's well-suited for lightweight applications where space is ...