Motors (DC, stepper, servo)

SKU: SF-WIG-13872 | Brand: SparkFun

The SparkFun Continuous Rotation (CR) Servo Trigger lets you control a hobby CR servo motor without any programming. Simply connect a servo and a switch, adjust the three onboard potentiometers, and the board handles ...

SKU: DF-SER0037 | Brand: DFRobot

An ultra-compact 2.5g micro servo with 360-degree continuous rotation, ideal for micro robots and space-constrained projects. The coreless motor and POM gears deliver smooth, reliable rotation in a tiny form factor me...

SKU: SF-WIG-13118 | Brand: SparkFun

The SparkFun Servo Trigger is a compact robotics board that simplifies control of hobby RC servo motors — no programming required. When an external switch or logic signal changes state, the board tells an attached ser...

SKU: DF-FIT0458 | Brand: DFRobot

INTRODUCTION This is the DFRobot TT Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single per round giving a max...

SKU: DF-FIT0450 | Brand: DFRobot

INTRODUCTION This is the DFRobot TT Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single ...

SKU: DF-FIT0473 | Brand: DFRobot

This metal DC geared motor features a 45:1 metal gear reducer in a compact form factor, delivering up to 4.5 kg·cm of stall torque at 133 RPM. The all-metal gearbox provides durability and reliability for robotics, dr...

SKU: DF-DFR0430 | Brand: DFRobot

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and lear...

SKU: AF-858 | Brand: Adafruit

This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revol...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: LB-LS6520 | Brand: Little Bird

Mini Wind & Water Turbine Generator Looking for a tiny yet effective way to explore renewable energy? This Mini Wind & Water Turbine Generator is a compact, hands-on solution for teaching and experimenting with green...

SKU: AF-6103 | Brand: Adafruit

A compact 60mm USB-powered cooling fan that provides instant airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to w...

SKU: WS-24702 | Brand: Waveshare

The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding rob...

SKU: DF-SER0062 | Brand: DFRobot

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved throug...

SKU: LB-RED-CAR | Brand: Little Bird

This 2WD aluminium alloy smart car platform provides a durable and stable chassis for building your own robot car. The lightweight aluminium body offers a solid foundation for mounting controllers, sensors, and other ...

SKU: DF-FIT0790 | Brand: DFRobot

A pack of four coreless micro motors measuring 6 × 10 mm, capable of reaching 55,000 RPM at 3.7V. Slightly larger than the 4 × 12 mm variant, these motors offer a wider shaft (0.8 mm) for improved propeller compatibil...

SKU: AF-4411 | Brand: Adafruit

A compact NEMA-8 bipolar stepper motor with the same 1.8° step angle (200 steps/revolution) as full-size NEMA-17 motors, but in a much smaller 20 × 30 mm package. Ideal for compact CNC builds, small robotics, and spac...

SKU: AF-4700 | Brand: Adafruit

A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump su...

SKU: KI-5620 | Brand: Kitronik

This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devi...

SKU: DF-FIT0564 | Brand: DFRobot

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is...

SKU: AF-3802 | Brand: Adafruit

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC All-Metal Gearbox Motor with a gear ratio of 1:90 abo...