Adafruit
Continuous Rotation Servo [FeeTech FS5103R]
·
This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good ...
Get notified when back in stock
This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.
To control with an Arduino, we suggest connecting the control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "90" (1.5ms pulse) is stop, "180" (2ms pulse) is full speed forward, "0" (1ms pulse) is full speed backwards. They may require some simple calibration, simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving.
Note: This product no longer includes the hole to adjust the Zero point.
Find this product in
Brands
Robotics & Motion
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
Turbo Metal Gear Worm Motor (12V 160RPM 2.2kg.cm)
$32.95
Electric Cooler Module (5V 1A)
$17.25
3V vertical water pump
$5.35
Gravity: Soil Moisture Sensor For Arduino
$4.75
Gravity: Analog Ambient Light Sensor For Arduino
$4.50
Gravity: Arduino pH Sensor / Meter Kit
$50.25
Aluminum Heat Sink for Raspberry Pi 3 - 15 x 15 x 15mm
$3.90
Piezo Element
$3.55
Featured in buying guides
Comparison guides this product appears in
Jargon buster
Plain-language definitions for the technical terms in the product description.
- IDE
- Short for Integrated Development Environment, a program used to write, run and manage code. It matters because some learners prefer a traditional coding workspace instead of a guided notebook-style lesson.
- potentiometer
- A variable resistor usually turned with a knob or shaft to create an adjustable electrical signal. It is often used for inputs such as volume, brightness or position, so it helps beginners learn how a microcontroller reads changing values.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.