All Products
AI Overview
If you searched “gravity led” for Arduino/micro:bit projects, these are the closest matches in the Gravity ecosystem:
Gravity LED String / Decorative Lighting
- Gravity: LED String Lights (Colorful) ($17.40) — ready-made colorful LED string for decoration/lighting effects.
- Gravity: Digital LED String Lights (Warm White) For Arduino - DFrobot ($17.40) — 40 warm-white LEDs on 4m wire, digital signal control via Gravity interface (great for fades/PWM).
Gravity LED Buttons (momentary)
- Gravity: LED Button - Blue ($7.90) — momentary illuminated button (lights while pressed).
- Gravity LED Button for Arduino and micro:bit - Red ($11.05)
- Gravity LED Button for Arduino/micro:bit - Yellow ($11.05)
- Gravity LED Button Module for Arduino/micro:bit - Green ($11.05)
- DFRobot Gravity LED Button for Arduino and micro:bit - White ($11.05)
- Gravity: LED Button x 5 Pack ($39.25) — bundle with 5 colors (red/yellow/green/blue/white).
Gravity LED Switches (self-locking / latching)
- Gravity: LED Switch - Blue ($7.35) — latching/self-locking illuminated switch.
- Gravity LED Self-Locking Switch - Red ($11.05)
- DFRobot Gravity LED Switch Module - Green ($11.05)
- Gravity LED Switch Module - White ($11.05)
- DFRobot Gravity LED Self-Locking Switch - Yellow ($11.05)
- Gravity: LED Switch x 5 Pack ($36.40) — bundle with 5 colors (red/yellow/green/blue/white).
Simple single-color LED output modules
- Gravity: Digital Blue LED Light Module ($3.00) — easy digital on/off LED.
- Gravity: Digital Green LED Light Module ($3.00) — easy digital on/off LED.
- Gravity: Bright LED Module ($3.75) — higher-brightness LED option.
What kind of “Gravity LED” are you after?
Showing 41-60 of 100 products
Gravity: Water Flow Sensor (1/2) For Arduino
INTRODUCTION The Gravity Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows throug...
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration data via a serial interface — ideal for building air quality monitors, weather s...
Gravity: Digital Push Button (Blue)
The Gravity Digital Push Button (Blue) is a simple momentary push button module designed for the DFRobot Gravity interface. It features an onboard LED indicator, immersion gold PCB surface, and a coloured button cap. A "D" marking on the board identifies it as a digital sensor for quick wiring re...
Gravity: Digital 5A Relay Module For Arduino
The DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appliances of high power and other equipments. The modular design makes it easy to in...
micro:bit Expansion Board for Boson (Gravity Compatible)
The micro:bit Expansion Board for Boson is a carry-on board that connects to the BBC micro:bit via edge connector, replacing crocodile clips with six keyed 3-pin sockets. It is compatible with DFRobot's Boson and Gravity modularised electronic modules, giving access to hundreds of digital and ana...
Gravity: Analog Water Pressure Sensor
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it connects directly to Arduino and other 5 V microcontrollers for easy integration i...
Gravity: Digital Peristaltic Pump
Gravity: digital peristaltic pump is a new product developed by DFRobot. This is a new member of our water quality monitoring devices. It is an actuator for the liquid system. DFRobot peristaltic pump integrates a PPM motor driver on the pump, this is a Gravity interface (PH2.0-3P) motor...
Gravity: I/O Expansion Shield for Pyboard
The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-compatible sensors and modules into the clearly labelled ports. An onboard externa...
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch...
2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver with Gravity Connector is a compact dual-channel motor driver based on the TB6612FNG IC. This version features standard DFRobot Gravity connectors for plug-and-play wiring with Gravity-compatible expansion boards — no soldering or breadboard needed. Each channe...
Gravity: I2C Oxygen Sensor
The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this arduino-compatible oxygen sensor can be widely applied to fields like ...
Gravity: I2C LIS331HH Triple Axis Accelerometer Sensor (±6g/±12g/±24g)
The Gravity: LIS331HH is a high-performance 3-axis linear accelerometer with ultra-low power consumption of just 10 µA in low-power mode. It offers user-selectable measurement ranges of ±6g, ±12g, or ±24g and delivers 16-bit data output with configurable data rates from 0.5 Hz to 1 kHz. Using th...
Gravity: I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)
The LIS2DW12 is an ultra-low-power high-performance three-axis linear accelerometer. It has user-selectable full scales of ±2g/±4g/±8g/±16g and is capable of measuring accelerations with output data rates from 1.6 Hz to 1600 Hz. The sensor comes with two independent programmable interrupts and a ...
Gravity: 3 Pin PH2.0 to DuPont Male Connector Digital Cable Pack (30cm)
Note: One package has 10 cables.This high-quality 30cm digital sensor cable is equipped with 3 pin PH2.0 plug connector on one side and Dupont male connector on the other side. One package has 10 cables. Compatible with breadboard and DuPont wire spacing, these cables use materials that are ...
Gravity: Liquid Flow Sensor (G3/4)
This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference and anti-impact, the sensor offers reliable performance and long service life. Al...
Gravity: Liquid Flow Sensor (G1/2)
This Gravity: Liquid Flow Sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to ensure good waterproofness. Also, it embraces high anti-electromagnetic interference and anti-vibration capabilities, offering reliable ...
Gravity: Conductivity Sensor Switch
The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity. Its maximum detection value is 10MΩ. It can detect not only coins, wires, metal and other good conductors, but also the human body, fruit, plants and other conductors. By touching the...
Gravity: Bright LED Module
INTRODUCTION The Bright LED module is designed for some special application. It's using a very bright LED component as its light source. Compatible with DFRobot gravity 3-Pin interface, plug and play. What you need is just a digital signal, you can drive it directly. Besides, the LED is so b...
Gravity: IIC to Dual UART Module
The Gravity IIC to Dual UART Module converts a single I2C connection into two independent hardware serial ports. Each sub-UART has its own 256-byte FIFO buffer for transmitting and receiving, with individually configurable baud rate, word length, and parity settings. Most controller boards like ...
Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)
A pack of 10 Gravity-series 4-pin sensor cables, 30 cm long, for connecting I2C or UART sensors to Gravity-compatible boards. Each cable has a PH2.0 4-pin connector on one end and a XH2.54 DuPont connector on the other, compatible with standard 2.54 mm breadboard pin pitch for easy prototyping. ...
