Gravity: Liquid Flow Sensor (G1/2)
35 units will be
available shortly.
This Gravity: Liquid Flow Sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to ensure good waterproofness. Also, it embraces high anti-electromagnetic interference and anti-vibration capabilities, offering reliable performance and long service life.
The sensor can be used with microcontrollers like Arduino UNO to measure the flow of liquids with high concentration and low viscosity like water, diesel, engine oil, milk, paint, detergent, honey, etc. (no impurity in liquid)
FeaturesGravity interface, easy to wireWide voltage of 3.5~24VMeasure the flow of the high-concentration but low-viscosity liquidRoHS compliantApplicationsMeasure the flow of liquids with high concentration and low viscosity SpecificationOperating Voltage: DC3.5~24VOperating Current: ≤10mA (DC5V)Output Mode: NPN pulse signalPipe Diameter: G1/2Thread I.D.: 10mmThread O.D.: 20.5mmThread Length: 29mmWater Pressure Resistance: ≤1.2MPAInsulation Resistance: >100MΩFlow Range: 30-1200L/HError: ±1% (5-600L/H)Output Pulse High Level: >DC4.7V (input voltage DC5V)Output Pulse Low Level: Output Pulse Duty Ratio: 50%±10% Flow & Pulse Correlation: 1L=150 pulses Operating Temperature: ≤80°C Operating Humidity: 35%~90%RH (No condensing) Storage Temperature: -25°~+80°C Storage Humidity: 25%~95%RH Dimensions: 80*47*37mm/3.15*1.85*1.46" DocumentsProduct wikiShipping ListGravity: Liquid Flow Sensor (G1/2) × 1
The Gravity: Liquid Flow Sensor (G1/2) appears in the following collections:
