Arduino Power Supplies and Voltage Regulators

SKU: LB-LR0186 | Brand: Little Bird

This is a simple breadboard power supply module that is capable of 7-12V input voltage and selectable outputs (5V or 3.3V) regulated voltage. All headers are 0.1" pitch for simple insertion into a 400 point  b...

SKU: DF-FIT0111 | Brand: DFRobot

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: LB-LR0296 | Brand: Little Bird

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard...

SKU: DF-FIT0110 | Brand: DFRobot

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel ...

SKU: TB-PH9230 | Brand: Little Bird

A standard-quality 9V battery clip with flylead connections. The holder is moulded in Delrin with corrosion-resistant nickel-plated springs and studs for reliable everyday use. Specifications Cell Type – 9V Output...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: DF-FIT0151 | Brand: DFRobot

A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, ci...

SKU: AF-1131 | Brand: Adafruit

A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs includin...

SKU: AF-2215 | Brand: Adafruit

A 16.000 MHz quartz crystal in the HC49/US short-style package, supplied with two 20pF load capacitors. The crystal provides higher precision than ceramic resonators, with 30 PPM tolerance and 50 PPM stability — suita...

SKU: SF-PRT-10218 | Brand: SparkFun

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standa...

SKU: AF-5855 | Brand: Adafruit

A compact 5 V, 0.3 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystal...

SKU: TB-MP3146 | Brand: Little Bird

Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side by side on a power board, no more wasted AC outlets! Incorporates a ...

SKU: DF-FIT0043 | Brand: DFRobot

The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2...

SKU: SF-PRT-11476 | Brand: SparkFun

This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder t...

SKU: AF-1125 | Brand: Adafruit

Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.Comes with a 5.5...

SKU: SF-PRT-09518 | Brand: SparkFun

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering...

SKU: DF-FIT0131 | Brand: DFRobot

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development...

SKU: AF-4552 | Brand: Adafruit

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter...

SKU: AF-1351 | Brand: Adafruit

A simple 2-way DC barrel jack splitter that lets you power two devices from a single power adapter. Plug in one standard 5.5mm/2.1mm DC barrel jack and get two identical outputs — perfect for powering multiple boards ...