Deals

SKU: LB-HEAT-CASE | Brand: Little Bird

This CNC-machined aluminium alloy case doubles as a passive heatsink for the Raspberry Pi 4, drawing heat away from the processor without the need for a fan. The solid metal construction provides excellent thermal dis...

SKU: LB-PT2025 | Brand: Little Bird

NOTE: These devices are not recommended for the PI5 which uses USB-C PD to supply more power than a PI4This device is perfect for turning on and off power to your Raspberry Pi 4 or other single board computer powered...

SKU: PI-CAB0003 | Brand: Pimoroni

Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of jerk...

SKU: LB-LR0085 | Brand: Little Bird

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V ra...

SKU: PI-CAB0002 | Brand: Pimoroni

Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of j...

SKU: PI-CAB0001 | Brand: Pimoroni

Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of j...

SKU: LB-LR0259 | Brand: Little Bird

This high quality micro-sized servo is an affordable and simple to use servo for all your mechatronic needs. This servo can operate from 3.0v-7.2v and delivering 1.6kg/cm maximum torque at 0.10 sec/60° The micro se...

SKU: LB-BK-LR0282 | Brand: Little Bird

Description This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of a...

SKU: SF-DEV-13814 | Brand: SparkFun

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable el...

SKU: SF-PRT-00116 | Brand: SparkFun

A 40-pin single-row straight male header strip with standard 0.1" (2.54mm) pitch. Snap or cut the strip to any length you need — ideal for soldering onto PCBs, breakout boards, and prototyping projects. Key Features ...

SKU: SF-PRT-00115 | Brand: SparkFun

Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in our SparkFun Original boards. They mate very well with break away male headers...

SKU: LB-LS0845 | Brand: Little Bird

You can never find a knife when you need one!    We use these when working with PCBs , cardboard and paper craft.These small knives work well for cutting traces, scraping ground pours, and guiding hair-like ...

SKU: LB-LS2921 | Brand: Little Bird

Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for  prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiomete...

SKU: RP-RP2040 | Brand: Raspberry Pi Ltd

The RP2040 is Raspberry Pi's first microcontroller chip, featuring dual ARM Cortex-M0+ cores running at up to 133 MHz. Built on a 40 nm process in a compact 7 × 7 mm QFN-56 package, it delivers high performance at low...

SKU: LB-LR0244 | Brand: Little Bird

This general-purpose 130-size hobby motor runs on 3–6V and spins at 4,000–8,000 RPM depending on the input voltage. Its compact size and 2 mm shaft make it well suited for small robotics projects, fan-powered cars, an...

SKU: LB-MICROACC | Brand: Little Bird

Handy accessories to get you started with micro:bit! This  little kit has a battery pack with switch for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding...

SKU: LB-PT101011M | Brand: Little Bird

A 20-metre roll of 5 mm wide copper tape with conductive adhesive backing. The conductive adhesive ensures electrical continuity through the tape, making it ideal for creating low-profile circuit traces, RF shielding,...

SKU: SF-COM-11118 | Brand: SparkFun

Super bright 10 mm white through-hole LEDs with high luminous output of 16,000–20,000 mcd. Their large size and narrow 30° viewing angle make them ideal for focused lighting, indicators, and decorative projects. Spec...

SKU: LB-OWL-IR | Brand: Little Bird

An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to bu...

SKU: LB-LS0014 | Brand: Little Bird

Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 /...