Prototyping

SKU: SF-COM-10440 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a green cap. It’s just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and...

SKU: AF-591 | Brand: Adafruit

The Adafruit Perma-Proto Super Pack includes 9 high-quality prototyping PCBs — three of each size — so you always have the right board for whatever you're working on. Each board features through-plated, gold-finished ...

SKU: SF-COM-10439 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get visual feedback, or light up your project. These have a 12mm body and...

SKU: DF-FIT0455-Y | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: DF-FIT0455-R | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: DF-FIT0455-W | Brand: DFRobot

A self-locking illuminated push button with a white LED indicator. When pressed, the button locks into position and the LED lights up; press again to release. The built-in LED includes a resistor for direct 5–12V oper...

SKU: DF-FIT0455-B | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: SF-PRT-12748 | Brand: SparkFun

A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount...

SKU: AF-1784 | Brand: Adafruit

Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead, a metal rod is wrapped with the voice coil. When c...

SKU: SF-PRT-09922 | Brand: SparkFun

A six-wire cable assembly with a 6-pin Molex connector (0.1″ spacing) on one end and bare wires on the other. Includes the mating connector, making it easy to create board-to-board connections or custom wiring harness...

SKU: SF-PRT-09918 | Brand: SparkFun

A two-wire jumper cable with a 2-pin Molex connector (2.54 mm / 0.1" spacing) on one end and bare wire on the other. Includes the mating connector for the Molex header. Useful for board-to-board connections and genera...

SKU: AF-777 | Brand: Adafruit

Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add...

SKU: AF-794 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" female heade...

SKU: AF-811 | Brand: Adafruit

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...

SKU: SF-BOB-29196 | Brand: SparkFun

This compact breakout board makes it easy to bring a female DE9 connector, often called DB9, onto a breadboard or into a custom wiring harness.All nine connector pins are broken out to 0.1in-spaced plated through-hole...

SKU: SF-PRT-21297 | Brand: SparkFun

This compact regulator board makes it easy to power breadboard projects from a 6-12V supply. It provides a selectable regulated output of either 5V or 3.3V, making it handy for quick prototyping with common microcontr...

SKU: DF-FIT0584 | Brand: DFRobot

This flexible silicone-insulated wire pair is made for high-current power wiring in demanding electronics, robotics and motion-control projects. It uses fine tin-plated copper strands for good conductivity and oxidati...

SKU: SF-PRT-28008 | Brand: SparkFun

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up wi...

SKU: SF-WRL-23187 | Brand: SparkFun

This PCB edge-mount SMA RF connector is made for adding an antenna connection directly to your circuit board. It is a handy choice for prototyping wireless designs that need a standard SMA antenna interface.The connec...

SKU: SF-PRT-17993 | Brand: SparkFun

These premium jumper wires are a simple, dependable way to connect projects on a breadboard or 0.1in pitch prototyping board. Each wire uses flexible stranded core wire with a solid male pin connector on both ends, so...