Prototyping

SKU: LB-2x40-BLUE | Brand: Little Bird

This double-row, 80-pin (2×40) straight male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any dual-row length you need. The...

SKU: AF-5938 | Brand: Adafruit

A breakaway strip of 36 press-fit male pin headers at standard 2.54mm (0.1") pitch. These headers can be attached to PCBs without soldering — press them firmly into place using pliers for a friction-fit connection tha...

SKU: LB-LS7240-H | Brand: Little Bird

Introducing the perfect solution for prototyping - our Half-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution wi...

SKU: LB-LR0178-350 | Brand: Little Bird

SKU: LB-LS000A | Brand: Little Bird

A pack of 30 tactile pushbutton switches in six vibrant colours — blue, white, yellow, green, black, and red. Each 12mm switch comes with a snap-on square cap, making it easy to create colour-coded controls for your p...

SKU: LB-LS6511 | Brand: Little Bird

A 30-metre kit of flexible silicone hook-up wire in red and black, ideal for power wiring in electronics projects. The 22AWG gauge suits a wide range of applications from breadboard prototyping to permanent installati...

SKU: LB-RED-100 | Brand: Little Bird

A bulk pack of 100 red 5mm through-hole LEDs. These standard LEDs are ideal for power indicators, status lights, and general-purpose projects. Key Features 5mm Diameter – Standard size for breadboards and PCBs Red...

SKU: LB-PT91073 | Brand: Little Bird

This 25-pack of momentary push buttons comes with colour-coded round keycaps in a handy storage case. Each button includes a matching keycap, making them easy to organise and use across projects. The assortment of fiv...

SKU: LB-LS7240-F | Brand: Little Bird

Introducing the perfect solution for prototyping - our Full-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution wi...

SKU: AF-5993 | Brand: Adafruit

The Adafruit USB Type C Vertical Breakout (Downstream Connection) provides easy access to all the pins on a USB-C connector in a vertical orientation, ideal for breadboard use and enclosure mounting. Two 5.1K resistor...

SKU: SF-BOB-28467 | Brand: SparkFun

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 ...

SKU: AF-6020 | Brand: Adafruit

DescriptionElevate your Bus Pirate 5 experience with this premium accessory. This keyed and locking probe cable, crafted from soft and flexible silicone-coated wire, connects seamlessly to the Bus Pirate's 10-pin mai...

SKU: SF-BOB-17110 | Brand: SparkFun

USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54...

SKU: SF-PRT-21297 | Brand: SparkFun

This compact regulator board makes it easy to power breadboard projects from a 6-12V supply. It provides a selectable regulated output of either 5V or 3.3V, making it handy for quick prototyping with common microcontr...

SKU: DF-FIT0916-MM | Brand: DFRobot

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin ta...

SKU: SF-CAB-23353 | Brand: SparkFun

This handy cable connects a six pin GHR-06V type locking connector to breadboard-friendly male pins, making it easier to prototype with compact modules.The 1.25mm pitch GHR-06V locking JST connector is commonly found ...

SKU: SF-COM-30154 | Brand: SparkFun

This is a basic 1 MOhms through-hole resistor with ±5% tolerance and a 1/6W power rating. It is a simple passive component suited to prototyping, repairs and general circuit building.The PTH package is commonly used w...

SKU: SF-DD-18616 | Brand: SparkFun

This handy adapter cable connects a five-pin GHR-05V type locking JST connector to breadboard-friendly male pins, making it easier to prototype with small modules that use compact locking connectors.The 1.25mm pitch G...

SKU: SF-DD-18638 | Brand: SparkFun

This cable adapts a 4-pin JST-ZHR connector to breadboard-compatible male pins, making it easier to prototype with devices that use the common friction-fit ZHR-style JST connection.It is a handy option for connecting ...

SKU: SF-PRT-18986 | Brand: SparkFun

This is a simple 3-pin male right-angle header for through-hole PCB mounting. It is handy when you need pins to exit sideways from a board instead of straight up.The header uses the standard 0.1in pin spacing, making ...