Prototyping

SKU: SF-DD-14410 | Brand: SparkFun

This is a simple strip of five signal-conditioning Balun Ember Transformers from Wurth Elektronik that allows you to convert an unbalanced signal in a transmission line to a balanced one, or vice versa. Each of these ...

SKU: TB-PP0655 | Brand: Little Bird

To terminate BNC sockets. Built in 50-ohm resistor. Specifications Plug or Socket Type BNC Pack Quantity 1pc ...

SKU: TB-PB8816 | Brand: Little Bird

Features: - 400 distribution holes- 1280 terminal holes- Mounted on a metal plate- 3 banana terminals- Rubber feet.

SKU: AF-3685 | Brand: Adafruit

Warning: This soldering iron has a US-style plug and operates on 120VAC only. It is not compatible with Australian 240V power outlets. A portable, adjustable-temperature pen-style soldering iron with 60W of power f...

SKU: TB-ST0505 | Brand: Little Bird

A miniature 3PDT (3-pole, double-throw) toggle switch for panel-mount applications. With three independent switching circuits, this switch can control multiple signals simultaneously — commonly used in guitar effect p...

SKU: SF-PRT-09429 | Brand: SparkFun

This is a through-hole 6-pin right-angle female header. This header connects perfectly with the 6-pin male header on Arduino Pros and LilyPad Main Boards. Pins are spaced by 0.1".Documents:Datasheet

SKU: SF-GPS-08288 | Brand: SparkFun

Surface mount vertical 5-pin 1.0mm pitch connector for connecting to the EM-408 interface cable.

SKU: SF-GPS-09079 | Brand: SparkFun

This is a vertical 10-pin SMD connector designed for use with the GS406 helical GPS receiver module. It provides a surface-mount interface for connecting the GS406 to your custom PCB, enabling access to the module's s...

SKU: AF-1624 | Brand: Adafruit

A compact 8×8 pure green LED matrix in a 20 × 20 mm (0.8″) package. With 64 LEDs, 16 pins (8 per side), and standard 2.54 mm (0.1″) pin spacing, it plugs directly into a breadboard with room to spare for wiring. This...

SKU: SF-COM-11041 | Brand: SparkFun

A bare PCB for building a relay control circuit, based on SparkFun's Controllable Power Outlet tutorial. It allows you to switch high-voltage loads using a simple 0–5V GPIO signal from any microcontroller. Components ...

SKU: TB-PM0828 | Brand: Little Bird

DB15 (15 pin) plastic backshell. Specifications Plug or Socket Type D15 Pack Quantity 1pc ...

SKU: SF-COM-00538 | Brand: SparkFun

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: SF-COM-08973 | Brand: SparkFun

A 14-pin ZIF connector designed for use with sealed membrane keypads. The right-angle SMD package with 1 mm pitch allows for a low-profile, surface-mount connection to membrane switch assemblies. Specifications Pin...

SKU: SF-CAB-14303 | Brand: SparkFun

A 10-pack of cables with an alligator clip on one end and a bare hookup pigtail (male pin) on the other. These cables make it easy to connect alligator clips directly into breadboards, development boards, and any stan...

SKU: SF-BOB-09719 | Brand: SparkFun

A breadboard-friendly breakout board for the Analog Devices AD5330 8-bit parallel digital-to-analogue converter (DAC). All necessary pins are broken out to 2.54 mm (0.1″) spaced headers. The board includes a decouplin...

SKU: TB-PT4932 | Brand: Little Bird

Non-insulated eye terminals for electrical and automotive applications. These tin-plated copper terminals accept 4mm² (12–14 AWG) wire and feature a 6mm eye for bolt connections. Hex crimp fitting for secure cable att...

SKU: AF-1719 | Brand: Adafruit

Make a small linear display with multiple colors using this elegant bi-color LED bargraph. Only 1.2" long, it is quite visible but not so large it wont plug into a breadboard! 24 LEDs are contained in the plastic b...

SKU: AF-2134 | Brand: Adafruit

A compact 9-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: TB-RY6825 | Brand: Little Bird

A 100µF 50V bipolar (non-polarised) electrolytic capacitor that can be installed in either orientation. Unlike standard electrolytic capacitors, bipolar types use two anodes connected in series, eliminating the need t...

SKU: SS-ELB141D1P | Brand: Seeed Studio

This is a Protoshield kit with the same connector as Electronic Brick, you can solder something onto this and use it as a regular Electronic Brick.    You will also need this cable to connect it to Se...