All Products
AI Overview
If you searched “gravity led” for Arduino/micro:bit projects, these are the closest matches in the Gravity ecosystem:
Gravity LED String / Decorative Lighting
- Gravity: LED String Lights (Colorful) ($17.40) — ready-made colorful LED string for decoration/lighting effects.
- Gravity: Digital LED String Lights (Warm White) For Arduino - DFrobot ($17.40) — 40 warm-white LEDs on 4m wire, digital signal control via Gravity interface (great for fades/PWM).
Gravity LED Buttons (momentary)
- Gravity: LED Button - Blue ($7.90) — momentary illuminated button (lights while pressed).
- Gravity LED Button for Arduino and micro:bit - Red ($11.05)
- Gravity LED Button for Arduino/micro:bit - Yellow ($11.05)
- Gravity LED Button Module for Arduino/micro:bit - Green ($11.05)
- DFRobot Gravity LED Button for Arduino and micro:bit - White ($11.05)
- Gravity: LED Button x 5 Pack ($39.25) — bundle with 5 colors (red/yellow/green/blue/white).
Gravity LED Switches (self-locking / latching)
- Gravity: LED Switch - Blue ($7.35) — latching/self-locking illuminated switch.
- Gravity LED Self-Locking Switch - Red ($11.05)
- DFRobot Gravity LED Switch Module - Green ($11.05)
- Gravity LED Switch Module - White ($11.05)
- DFRobot Gravity LED Self-Locking Switch - Yellow ($11.05)
- Gravity: LED Switch x 5 Pack ($36.40) — bundle with 5 colors (red/yellow/green/blue/white).
Simple single-color LED output modules
- Gravity: Digital Blue LED Light Module ($3.00) — easy digital on/off LED.
- Gravity: Digital Green LED Light Module ($3.00) — easy digital on/off LED.
- Gravity: Bright LED Module ($3.75) — higher-brightness LED option.
What kind of “Gravity LED” are you after?
Showing 21-40 of 100 products
Gravity Factory-Calibrated Laser Methane CH4 Sensor
·
This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas sensors.It is factory calibrated and intended for reliable data collection in com...
DFRobot Gravity LED Button for Arduino and micro:bit - White
·
This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear visual feedback.The module behaves like a basic digital switch: when pressed do...
_830x554.jpg.webp)
Gravity 8x8 Matrix ToF Distance Sensor - I2C/UART
·
This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interactive project a much better sense of what is in front of it.Onboard firmware runs o...
Gravity: CT1780 1-Wire K-Type Thermocouple Amplifier (-270℃ to +1372℃ Temp Range)
·
The CT1780 is a cold-junction compensated amplifier for K-Type thermocouples, designed to make extreme temperature measurement easier to add to microcontroller projects. It digitises the tiny thermocouple signal and provides temperature readings with 0.25℃ resolution over a very wide measurement ...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm)
·
This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitoring nodes where stable CO₂ readings are needed without complex hardware integrat...
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
·
This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...
Gravity Air780E 4G CAT1 IoT Module for China, India & SEA
·
Add LTE CAT1 connectivity to IoT projects and development boards with this Air780E communication module from DFRobot. It supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41 bands, making it suitable for deployments in China, India, Southeast Asia and other supported regions.The module pr...
Gravity: Digital 10A Relay Module For Arduino and Raspberry Pi
This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...
Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino (Pre-Order)
Measure dissolved oxygen in water for aquaculture, environmental monitoring, natural science projects and general water-quality work. This DFRobot Gravity kit pairs a galvanic dissolved oxygen probe with an analogue signal converter board for easy use with Arduino and other microcontrollers that ...
DFRobot Gravity LoRaWAN Node Module US915 (SX1262)
·
This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa communication and LoRaWAN networking.It can be used for point-to-point links or...
DFRobot Gravity LED Self-Locking Switch - Yellow
·
This illuminated latching push button combines a tactile switch with a built-in yellow indicator LED, making it easy to add clear on/off control to interactive electronics and educational prototypes.When the button is pressed down, the module self-locks, outputs High and lights the LED. Pressing ...
Gravity 4-Pin M/M DuPont Cable with Tags - 30cm (5 Pack)
·
This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...
Gravity GP8600 1-Channel I2C/PWM 16-bit DAC Module
·
This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applications such as 0-5V, 0-10V and 4-20mA control.It is designed for automation and c...
Gravity: Arduino Analog Flame Sensor
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefighting robots, fire alarm projects, and other safety applications. The Gravity i...
Gravity Sensor Cable For LattePanda (10 Pack)
These wire offers you the best way to connect sensors and actuators to your LattePanda! They are specially designed for LattePanda and DFRobot Gravity Sensors. It compatible with a wide range of Gravity sensors and is easy to connect thanks to the unique anti-reverse-polarity design. It incl...
Gravity: Formaldehyde (HCHO) Sensor (Arduino Raspberry Pi Compatible)
The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in air. Through it, you can know the air quality. This sensor module is widely used ...
Gravity: Analog Slide Position (Potentiometer) Sensor For Arduino
This arduino Slide Position Sensor is based on straight-slip slide potentiometer sensor. The sensor is able to give provide the position of the slider which is often considered as a linear potentiometer . The sensor includes two analog outputs to allow the user to average the values and m...
Gravity: Digital Capacitive Touch Sensor For Arduino
A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years. The raise of atmospheric CO2 content to some extent results in gl...
