All Products
AI Overview
Popular DFRobot picks (by project type)
- Power / off-grid: DFRobot Solar Power Manager Kit with 9V Panel (9V panel, compact solar power management) — $115.05.
Industrial / outdoor sensing (RS485 / IP-rated)
- Weather station (all-in-one): DFRobot Ultrasonic 7-in-1 RS485 Weather Sensor (7-in-1, RS485) — $612.20.
- Water turbidity: DFRobot SEN0710 RS485 Industrial Turbidity Sensor (0-1000 NTU) (0–1000 NTU, RS485) — $563.00.
- Water conductivity (EC): DFRobot RS485 Industrial Water EC Sensor K=1 (K=1, pre-calibrated, RS485) — $366.35.
- Water pH: DFRobot RS485 Modbus IP68 Water Quality pH Sensor (IP68, Modbus-RTU/RS485) — $317.15.
- Water ORP: DFRobot Industrial RS485 ORP Sensor - IP68 ModBus-RTU (IP68, Modbus-RTU/RS485) — $440.10.
- Ultrasonic ranging (IP67): DFRobot SEN0627 Small-Angle Ultrasonic Ranging Sensor 8m IP67 (25–800 cm, IP67, 15° FOV) — $291.05.
- Non-contact liquid level (radar): DFRobot SEN0676 80GHz mmWave Liquid Level Sensor - 40m UART (80GHz FMCW, up to 40 m, UART) — $145.05.
Wireless / IoT
- Private LoRaWAN gateway (EU868): DFRobot LoRaWAN Gateway with SIoT & Node-RED - EU868 (EU868, SX1302 8-channel, local server + Node-RED) — $366.35.
- BLE sensor broadcasting (5-pack): DFRobot Fermion BLE Sensor Beacon Pack - 5 Pack (turn 3.3V sensors into BLE nodes) — $41.55.
Robotics / UI / modules & accessories
- IMU + barometer: DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280) (BNO055 orientation + BMP280 pressure/temp) — $63.65.
- ESP32 touchscreen: DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32 (3.5" IPS, 480×320, capacitive touch) — $73.50.
- Wiring (Gravity → DuPont): DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack (30 cm, tagged signal labels, 5-pack) — $16.00.
- Lighting: DFRobot FIT0840 5V Flexible LED Strip, Purple - 60 LEDs/m (5V, 60 LEDs/m, ultra-thin) — $14.50.
Edge AI / vision
- Offline face/palm/QR recognition: DFRobot SEN0677 Offline AI 3D Vision Recognition Sensor (on-device AI, face + palm vein + QR decode) — $120.45.
Collections
Showing 1401-1420 of 1919 products
ESP32-S3 1.85" Round Touch Display Board with Qi Charging
·
Build compact visual interfaces, IoT dashboards and voice-enabled projects around an ESP32-S3R8 module with an integrated circular touchscreen. The board combines processing, display, touch, wireless connectivity, audio and power features into a single development platform.The 1.85-inch round TFT...
8 Channel Ethernet Relay Controller (Support PoE and USB)
An 8-channel PoE and USB-controlled Ethernet relay controller based on an STM32 microcontroller. Each relay handles up to 277VAC at 10A or 125VAC at 12A, suitable for controlling household appliances, lighting, and industrial equipment remotely over a network. Supports DHCP and static IP configu...
Microswitch-5A/250V (especially for Ultimaker 3D printer)
This is a very sensitive and stable lever switch which is commomly used in industrial automation projects. But in your DIY projetcs or robots, this is also great for detecting objects. It can be used as a bumper sensor which is simple to wire and attach to objects. This sensor is commonly found ...
Bluetooth 4.0 RGB LED Strip Kit (Support iPhone Android)
The DFRobot Bluetooth 4.0 RGB LED Strip Kit combines a 3-metre WS2812 addressable LED strip with a Bluno (Arduino-compatible Bluetooth 4.0 board), sound sensor, and audio analyser. Control every individual LED from your iPhone or Android device via Bluetooth Low Energy — change colours in real ti...
M0601 Direct-Drive Hub Motor - Left, Integrated FOC Servo
·
The M0601 is a compact direct-drive hub motor for intelligent robots, AGVs, AMRs and other mobile platforms. It combines a brushless DC motor, servo driver and high-precision encoder into a 102mm diameter unit, reducing the need for external drivers and complex wiring.Motion control is handled wi...
Machine Friction Disc Lock Washer Torque Limiter Coupling
A spring-loaded friction torque limiter (model TL350-2) that protects drive systems from damage caused by shock loads, overloads, or machine jams. When torque exceeds the preset threshold, the coupling slips to absorb the overload, then automatically re-engages when the condition clears. The sli...
Gravity: DS18B20 Temperature Sensor (Arduino Compatible)
While there are many types of temperature sensors available in the market, the DS18B20 arduino Temperature Sensor form DALLAS is the best choice in applications which require high accuracy and high reliability. Its ultra-small size, low hardware overhead, strong anti-interference capability a...
YDLIDAR GS5 Solid-State LiDAR Sensor - 70-1000mm, 85° FOV
·
This compact solid-state LiDAR module gives robots and automation gear short-range obstacle awareness without the moving parts of a mechanical scanner. It covers 70mm to 1000mm with an 85° field of view and 0.54° angular resolution, making it suited to AGVs, service robots, vacuum cleaners and ot...
Solar Power Manager Micro (2V 160mA Solar Panel Included)
The Solar Power Manager Micro is an ultra-low-power solar energy management module designed for 1–3 V small solar panels. Built around the SPV1050 IC with MPPT (Maximum Power Point Tracking), it maximises solar conversion efficiency even under weak sunlight — enabling charge-free, battery-replace...
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack)
This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and analog sensors such as Ambient light sensor, Gray sensor, MIC sound, etc. It con...
ABS Transparent Case for Arduino UNO R3 (LEGO Compatible)
A transparent ABS case designed specifically for the Arduino UNO R3. The case protects your board from dust, splashes, and accidental short circuits while keeping all GPIO pins accessible through dedicated slots. The top and bottom feature a LEGO-compatible splicing structure, letting you integra...
2208 3-Phase BLDC Motor with AS5600 Encoder - 12V 1800RPM
·
This compact 2208 three-phase brushless DC motor combines a 12V BLDC motor with an integrated AS5600 magnetic encoder, making it a practical choice for closed-loop motor control and FOC experiments. It provides 300g.cm of torque and 12-bit position feedback for smooth, low-noise motion in project...
micro:Maqueen Plus V2 (18650) with micro:Maqueen Mechanic
Designed for classroom robotics and STEAM projects, this kit combines the micro:Maqueen Plus V2 18650 robot base with the micro:Maqueen Mechanic add-on set for forklift, push, beetle and loader builds.Maqueen Plus V2 builds on the Maqueen series with a larger body, more expansion ports, a higher-...
micro:Maqueen Plus V2 (Ni-MH) with micro:Maqueen Mechanic
This educational robot kit combines the micro:Maqueen Plus V2 AA vehicle body with the micro:Maqueen Mechanic set for building forklift, push, beetle and loader-style mechanisms. It is designed for micro:bit-based STEM and STEAM learning, classroom activities, after-school extension work and robo...
Gravity: I/O Expansion Shield for OpenMV Cam H7 & H7 Plus
Gravity: I/O Expansion Shield for OpenMV Cam H7 & H7 Plus is an expansion shield specially designed for the OpenMV Cam H7 and OpenMV Cam H7 Plus. It is compatible with various sensors and electronic modules of Gravity series, plug and play, no soldering required. It not only helps you avoid the c...
SHT20 I2C Temperature Humidity Sensor (Waterproof Probe)
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test. The SHT20 I2C temperature & humidity sensor adopt Sensirion techniqu...
Gravity M/F DuPont Jumper Wires with Tags - 30cm (5 Pack)
·
These labelled male-to-female DuPont jumper wires make it easier to keep track of connections in busy electronics builds. Each wire carries I2C/UART pin labelling, helping reduce mix-ups when colour coding or tiny board silkscreen is hard to read.The wire sequence is the same at both ends and fol...
micro:Maqueen Lite - micro:bit Educational Robot Platform
·
Maqueen Lite is a compact, pre-assembled robot for the BBC micro:bit, and the friendliest way into classroom robotics. Slot a micro:bit into the edge connector, write a few blocks in MakeCode, and it drives, follows a line, flashes its headlights and beeps. No soldering and no chassis to build. ...
Waterproof DS18B20 Digital Temperature Sensor For Arduino
This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get ...
Fermion: AHT20 Temperature and Humidity Sensor (Breakout)
The Fermion AHT20 is a high-precision, low-cost temperature and humidity sensor breakout from DFRobot. Built around an improved MEMS semiconductor capacitive humidity sensor element, it communicates over a standard I2C interface and operates across a wide 2–5 V supply range. The sensor performs ...
