Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)
SKU: AF-2809 | Brand: Adafruit
The Adafruit LIS3DH is a popular, low-power triple-axis accelerometer breakout packed with features typically found only on higher-end sensors. With selectable measurement ranges, multiple interface options, and built...
Delivered by Wed 1 Jul
SparkFun Load Sensor Combinator
SKU: SF-BOB-13878 | Brand: SparkFun
The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s ne...
Delivered by Thu 11 Jun
Gravity: Arduino CO2 Gas Sensor
SKU: DF-SEN0159 | Brand: DFRobot
The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer le...
Delivered by Mon 22 Jun
Adafruit PCF8523 Real Time Clock Assembled Breakout Board
SKU: AF-3295 | Brand: Adafruit
Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Pe...
Delivered by Wed 1 Jul
Gravity: Analog AC Current Sensor
SKU: DF-SEN0211 | Brand: DFRobot
INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this p...
Delivered by Thu 11 Jun
Gravity: Voice Recorder Module
SKU: DF-SEN0197 | Brand: DFRobot
The Gravity Voice Recorder Module is a compact board with integrated record and playback functions, based on the ISD1820 chip. Simply press the record button, speak into the onboard microphone, and release to save up ...
Delivered by Thu 11 Jun
Gravity: I2C Triple Axis Accelerometer - LIS2DH
SKU: DF-SEN0224 | Brand: DFRobot
DFRobot presents the ultra low-power Arduino triple axis accelerometer! This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode. The module is fitted with a Gravity I2...
Delivered by Mon 22 Jun
Laser Detector module
SKU: LB-LS1177 | Brand: Little Bird
Laser Detector Module Want to set up your own laser tripwire? These little modules make it super simple. Just hook one up to your Arduino, line it up with a laser pointer, and you’ve got a working laser detection syst...
Delivered by Thu 11 Jun
Gravity: UV Index Sensor (240-370nm, UVA, UVB, UVC)
SKU: DF-SEN0636 | Brand: DFRobot
The Gravity UV Index Sensor measures ultraviolet radiation across the 240–370 nm wavelength range, covering UVA, UVB, and UVC bands. It directly outputs a UV index (0–11) and a harm risk level (1–5), eliminating the n...
Delivered by Mon 22 Jun
Gravity: mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART)
SKU: DF-SEN0610 | Brand: DFRobot
##Introduction The Gravity: C4001 millimeter-wave presence sensor, operating at a wavelength signal of 24GHz, boasts a horizontal detection range of 100°, a presence detection range of 8 meters, and a motion detection...
Delivered by Mon 22 Jun
Adafruit STEMMA Reflective Photo Interrupt Sensor - TCRT1000
SKU: AF-5913 | Brand: Adafruit
The Adafruit STEMMA Reflective Photo Interrupt Sensor uses a TCRT1000 right-angle optical module to detect reflective surfaces. An onboard IR LED emits light, and when an object reflects it back to the IR phototransis...
Delivered by Wed 1 Jul
Adafruit SHT41 Trinkey - USB Temperature and Humidity Sensor
SKU: AF-5912 | Brand: Adafruit
The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading...
Delivered by Wed 1 Jul
SparkFun Photoacoustic Spectroscopy CO2 Sensor - PASCO2V01 (Qwiic)
SKU: SF-SEN-22956 | Brand: SparkFun
The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...
Delivered by Mon 22 Jun
Gravity: H2S Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0467 | Brand: DFRobot
This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...
Delivered by Mon 22 Jun
Fermion: MEMS Smoke Gas Detection Sensor (Breakout, 10-1000ppm)
SKU: DF-SEN0570 | Brand: DFRobot
Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...
Delivered by Thu 11 Jun
Fermion: MEMS Odor Smell Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0571 | Brand: DFRobot
Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal...
Delivered by Mon 22 Jun
Fermion: MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)
SKU: DF-SEN0567 | Brand: DFRobot
Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...
Delivered by Thu 11 Jun
Gravity: LTR390 UV Light Sensor (280nm to 430nm) - I2C & UART
SKU: DF-SEN0540 | Brand: DFRobot
The Gravity LTR390-UV sensor provides both ambient light and UV sensing with a UV spectral response from 280nm to 430nm. It features high sensitivity, quick response, and strong anti-interference performance. With a ...
Delivered by Mon 22 Jun
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5610 | Brand: Adafruit
The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Wed 1 Jul
SparkFun Environmental Sensor - BME688 (Qwiic)
SKU: SF-SEN-19096 | Brand: SparkFun
The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...
Delivered by Thu 11 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared