All Products
AI Overview
Popular DFRobot picks (by project type)
- Power / off-grid: DFRobot Solar Power Manager Kit with 9V Panel (9V panel, compact solar power management) — $115.05.
Industrial / outdoor sensing (RS485 / IP-rated)
- Weather station (all-in-one): DFRobot Ultrasonic 7-in-1 RS485 Weather Sensor (7-in-1, RS485) — $612.20.
- Water turbidity: DFRobot SEN0710 RS485 Industrial Turbidity Sensor (0-1000 NTU) (0–1000 NTU, RS485) — $563.00.
- Water conductivity (EC): DFRobot RS485 Industrial Water EC Sensor K=1 (K=1, pre-calibrated, RS485) — $366.35.
- Water pH: DFRobot RS485 Modbus IP68 Water Quality pH Sensor (IP68, Modbus-RTU/RS485) — $317.15.
- Water ORP: DFRobot Industrial RS485 ORP Sensor - IP68 ModBus-RTU (IP68, Modbus-RTU/RS485) — $440.10.
- Ultrasonic ranging (IP67): DFRobot SEN0627 Small-Angle Ultrasonic Ranging Sensor 8m IP67 (25–800 cm, IP67, 15° FOV) — $291.05.
- Non-contact liquid level (radar): DFRobot SEN0676 80GHz mmWave Liquid Level Sensor - 40m UART (80GHz FMCW, up to 40 m, UART) — $145.05.
Wireless / IoT
- Private LoRaWAN gateway (EU868): DFRobot LoRaWAN Gateway with SIoT & Node-RED - EU868 (EU868, SX1302 8-channel, local server + Node-RED) — $366.35.
- BLE sensor broadcasting (5-pack): DFRobot Fermion BLE Sensor Beacon Pack - 5 Pack (turn 3.3V sensors into BLE nodes) — $41.55.
Robotics / UI / modules & accessories
- IMU + barometer: DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280) (BNO055 orientation + BMP280 pressure/temp) — $63.65.
- ESP32 touchscreen: DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32 (3.5" IPS, 480×320, capacitive touch) — $73.50.
- Wiring (Gravity → DuPont): DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack (30 cm, tagged signal labels, 5-pack) — $16.00.
- Lighting: DFRobot FIT0840 5V Flexible LED Strip, Purple - 60 LEDs/m (5V, 60 LEDs/m, ultra-thin) — $14.50.
Edge AI / vision
- Offline face/palm/QR recognition: DFRobot SEN0677 Offline AI 3D Vision Recognition Sensor (on-device AI, face + palm vein + QR decode) — $120.45.
Collections
Showing 1-20 of 50 products · 10 unavailable products hidden
Audio BLE/SPP Pass-through Module - Bluetooth 5.0
INTRODUCTIONThis Bluetooth module features Bluetooth/U-disk/TF-card playback, and Bluetooth call function, supporting simple and clear serial port control function, BLE pass-through, and SPP pass-through functions. The highlight of this product is the dual-mode Bluetooth, which also means that it...
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
·
This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-5V, 0-10V and 4-20mA, with 16-bit resolution available in I2C mode.The symmetric...
2.0 320x240 IPS TFT LCD Display with MicroSD Card Breakout
A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible with a broad range of microcontrollers including Arduino Uno, Leonardo, ESP32, E...
Bluetooth 5.0 Audio Receiver Board
This is a compact and cost-effective Bluetooth 5.0 audio receiver module that supports automatic reconnect function. It can be powered by a micro USB or 3.7V lithium battery. You can easily convert your old speakers into wireless Bluetooth speakers with this module. If you short circuit the So...
UPS HAT for Raspberry Pi Zero
DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...
DFRobot SEN0676 80GHz mmWave Liquid Level Sensor - 40m UART
·
This 80GHz millimetre-wave radar module is built for precise, non-contact liquid level detection. Using Frequency Modulated Continuous Wave (FMCW) radar, it measures from above the liquid surface, making it suitable for corrosive, hazardous or high-purity liquids where contact probes are not idea...
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
·
This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...
DFRobot FIT0840 5V Flexible LED Strip, Purple - 60 LEDs/m
·
Add slim purple lighting to models, enclosures and compact electronics with this ultra-thin flexible LED strip from DFRobot. At just 2.5mm wide and 1mm thick, it is designed for tight spaces where a standard LED strip would be too bulky.The strip uses SMD 0805 LEDs at a density of 60 LEDs per met...
Gravity PH2.0 to Female DuPont Tagged Cable 30cm - 5 Pack
·
These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, ground, clock/receive and data/transmit lines without relying only on wire colour o...
Gravity: I2C LCD1602 Arduino LCD Display Module (Blue)
The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD1602. The module is compatible with both 3.3V and 5V systems, and the contrast i...
IO Expansion Shield for Launchpad
DFRobot proudly presents the I/O expansion shield for Texas Instruments MSP430 LaunchPad. With the I/O expansion shield, your LaunchPad will be able to access more than 100 various sensors, servos and wireless modules from DFRobot. The Xbee & APC220 socket allows you to start immediatly ...
DFRobot SEN0713 RS485 Chlorophyll Water Quality Sensor
·
This industrial-grade chlorophyll sensor measures chlorophyll concentration in water using the fluorescence principle, making it useful for algae monitoring in rivers, lakes, ponds, aquaculture systems and field research sites.The probe and housing are integrated into a single waterproof unit, wi...
2x1.2A DC Motor Driver (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver is a compact dual-channel motor driver based on the TB6612FNG IC. It requires only four GPIO pins to control two DC motors, using the same control logic as the DFRobot L298N motor driver — making existing L298N code directly compatible. Each channel delivers up...
Hackster & DFRobot EEDU Enviromental Sensor Kit (ESP32)
The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...
RGB LED Strip Driver Shield v1.0
The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...
Gravity 4-Pin M/M DuPont Cable with Tags - 30cm (5 Pack)
·
This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...
DFRobot Gravity LED Self-Locking Switch - Yellow
·
This illuminated latching push button combines a tactile switch with a built-in yellow indicator LED, making it easy to add clear on/off control to interactive electronics and educational prototypes.When the button is pressed down, the module self-locks, outputs High and lights the LED. Pressing ...
Gravity: VL53L0X ToF Laser Range Finder
The VL53L0X laser range finder is a high-precision distance sensor that based on new Time-of-Flight (ToF) principle. VL53L0X provides accurate distance measurement whatever the target reflection unlike traditional technology. It can measure absolute distances up to 2m.DFRobot has introduced VL...
Gravity: Arduino Heart Rate Monitor Sensor (ECG)
The DFRobot Gravity Heart Rate Monitor Sensor measures the electrical activity of the heart and outputs it as an analog signal. Built around the AD8232 chip, it filters and amplifies the ECG signal to produce a clean waveform from the PR and QT intervals — viewable in real time using the Arduino ...
DFRobot AS7341 11-Channel Visible Light Sensor-Breakout
This compact breakout uses the AMS AS7341 spectral sensor IC to measure colour across multiple visible-light bands. It is designed for projects that need more detail than a basic RGB colour sensor, with channels covering the visible spectrum plus near-IR and an unfiltered channel.The board includ...
