All Products

SKU: DF-FIT0105

A pack of 10 long straight male header strips, each with 40 breakable pins at 2.54mm pitch. The extended 10mm pin length allows socket-to-socket connections, and the plastic separator can be repositioned along the pins to suit your application. Snap or cut the strips to any size needed for custo...

SKU: DF-FIT0165

An 8-pin female stackable header with extended legs, designed for stacking Arduino shields and prototyping boards. The extra-long pins pass through one board and connect to the next, making it easy to build multi-layer shield stacks. Standard 0.1-inch (2.54mm) pin spacing ensures compatibility w...

SKU: AF-1542

These single-row right-angle female headers with 0.1" (2.54mm) pitch are an essential building block for electronics projects. Use them to add right-angle socket connections to perfboards, PCBs, and prototyping setups — they accept 22AWG wire or standard male header pins. Each header is 36 pins ...

SKU: AF-4079

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear taller components on the Pi or fit more neatly into cases. The header body is ...

SKU: SF-PRT-11542

A standard 0.1" (2.54 mm) pitch male header pin strip with 10 pins, designed for surface-mount applications where through-hole pins are not suitable. The SMD legs are staggered for stress relief during soldering. Key Features 10-Pin Male Header – Standard 0.1" (2.54 mm) pitch Surface Mount – ...

SKU: AF-3907

A colour-coded 2×20 pin header for the Raspberry Pi Zero and Zero W that makes it easy to identify pin functions at a glance. Each pin group is colour-coded so you can quickly find power, ground, and GPIO pins without counting or consulting a pinout diagram. Colour Coding Red – 5 V Yellow – 3...

SKU: WS-18995

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple to identify pins at a glance. Since the Raspberry Pi 400's GPIO header faces out...

SKU: PI-COM0002

This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving access to the GPIO pins underneath. Key Features 40-Pin (2×20) – Matches the...

SKU: PL-2749

A 2×20-pin stackable female header designed for the Raspberry Pi GPIO. The extended pins allow HATs and add-on boards to be stacked while still providing access to all 40 GPIO pins for additional connections. This version includes three removable 0.1" spacers, giving it extra height to clear the...

SKU: EC-CCH01065C

A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on top of each other. Specifications Pins: 6 (1×6 single row) Type: Female stack...

SKU: PI-COM0004

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...

SKU: SF-PRT-09015

A surface-mount 6-pin right-angle male header with standard 2.54 mm (0.1 in) pitch between pins and between rows. Ideal for adding a programming or serial header to compact PCB designs where a low-profile, right-angle connection is needed. Key Features 6 Pins – Single-row male header Right-An...

SKU: SF-PRT-11376

A 10-pin female header with extra-long legs, designed for stacking Arduino R3-compatible shields. The extended pins pass through a shield's PCB and connect to the board below, letting you stack multiple shields on a single Arduino. Key Features 10-Pin Female Header – Standard 0.1″ (2.54 mm) pi...

SKU: AF-5327

A compact 0.05" pitch (1.27mm) thru-hole female socket header in a 2×5 (10-pin) configuration. Originally designed for use with the PM2.5 Air Quality Sensor (PMSA003I) and its breakout board, this header is also handy for your own sensor and prototyping projects. These headers match standard SWD...

SKU: SF-PRT-08232

A 3-pin polarised male header with standard 0.1" (2.54mm) pin spacing. The keyed design prevents incorrect or reversed connections, making it ideal for power and sensor connections on perfboard and PCB projects. Specifications Pins – 3-pin male header Pitch – 0.1" (2.54mm) Type – Polarised (...

SKU: AF-4048

A compact 1.27 mm (0.05") pitch 2×5 mini SWD box header with a half-shroud and key-notch. A smaller alternative to full-shroud SWD headers, taking up much less board space while remaining compatible with standard 10-pin 1.27 mm IDC (SWD) cables. Commonly found on ARM Cortex development kits, thi...

SKU: SF-PRT-08233

A 2-pin polarised male header with 0.1″ (2.54 mm) pin spacing, designed for PCB and perfboard mounting. The keyed housing prevents reversed connections, making it ideal for power and sensor wiring where correct polarity matters. Specifications Pins – 2 Type – Male header (PCB mount) Pin Spac...

SKU: SF-PRT-10112

This 2 mm pitch 10-pin header mates with 2 mm XBee sockets and is ideal for creating custom breakout boards, "dummy" XBee modules for testing, or any project requiring 2 mm pitch pin headers. Key Features 2 mm Pitch – Matches XBee socket spacing 10 Pins – Compatible with standard XBee footpri...

SKU: AF-1833

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or prototype custom USB connections on a breadboard. The board uses a micro-AB conne...

SKU: SF-PRT-11540

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief. This is a 6-Pin male header. Documents: Datasheet