All Products
AI Overview
Here are the main SparkFun options found—ranging from beginner kits to MicroMod/Qwiic boards and sensors.
Starter kits (best if you want a complete learning bundle)
- SparkFun Inventor's Kit - v4.1.2 ($196.35) — all-in-one electronics kit; v4.1.2 mainly updates the carrying case vs v4.1.
- Inventor's Kit for MicroPython - KIT-29326 ($238.60) — beginner-friendly kit focused on MicroPython projects, progressing from basics to more advanced builds.
Wireless / IoT dev boards
- SparkFun Thing Plus - ESP32 WROOM (USB-C) ($72.73) — ESP32-WROOM, Wi‑Fi + Bluetooth, USB‑C, Feather-compatible Thing Plus form factor.
- Thing Plus RP2350 Wireless Development Board ($63.02) — built around Raspberry Pi RP2350, geared for connected/battery IoT builds with the Thing Plus ecosystem.
- Thing Plus RP2350 Wireless Development Board (Ding & Dent) ($67.91) — Ding & Dent variant of the RP2350 Thing Plus platform.
Qwiic / sensor & interface modules (I2C/Qwiic-friendly add-ons)
- LIS3DH Triple Axis Accelerometer Breakout (Qwiic) ($8.81) — 3‑axis accelerometer breakout with Qwiic.
- SparkFun Micro 6DoF IMU Breakout - LSM6DSV16X (Qwiic) ($50.08) — 6‑axis IMU (accelerometer + gyro) with Qwiic.
- Qwiic Directional Pad (PRT-26851) ($14.73) — 5‑way navigation input over I2C/Qwiic.
- Qwiic Alphanumeric Display - Pink ($20.60) — 14‑segment alphanumeric display via Qwiic.
- Qwiic MultiStar Constellation Ornament ($10.74) — Qwiic hub that adds 4 extra Qwiic ports.
Power / expansion / carrier boards
- Ideal Diode Breakout ($10.96) — power-path help for hot swaps/one-way voltage control.
- MicroMod STM32F405 Processor Board ($43.04) — STM32F405 (Cortex‑M4) on a swappable MicroMod M.2-style module.
- MicroMod Asset Tracker Carrier Board - SARA-R510AWS ($267.25) — LTE‑M carrier built around u-blox SARA-R510AWS with AWS IoT ExpressLink.
- Ethernet Adapter for Teensy 4.1 ($9.45) — adds wired Ethernet capability for Teensy 4.1 projects.
- AgXRP Pump & Soil Moisture Sensor Expansion Pack (Beta) ($87.63) — expansion pack for AgXRP adding an additional pump + soil moisture zone.
What kind of SparkFun item are you looking for?
Collections
Showing 1801-1820 of 1993 products · 313 unavailable products hidden
NEO-D9S GNSS Correction Data Receiver with Qwiic
·
This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the sky, especially to the south, it can decode L-Band correction broadcasts and help...
Espressif Ethernet - ESP Thread BR-Zigbee GW_SUB
A Sub-Ethernet daughter board which works with the ESP Thread Border Router board to extend an Ethernet interface. This allows you to use Ethernet with the fully featured Thread Border Router.
LTE Hinged External Antenna 600–2700MHz SMA Male
·
Improve the signal performance of your cellular project by moving the antenna outside the enclosure. This LTE hinged external antenna helps reduce interference from internal electronics, giving your modem a cleaner signal path and a more stable connection.Designed for broad cellular compatibility...
No-Clean Solder Wick #4 Light Blue - 2.5mm x 5ft
·
This desoldering wick is a pre-fluxed copper braid for removing solder from joints, fixing excess solder, and cleaning up solder bridges. It is a handy bench consumable for rework, repairs, and swapping components on PCBs.To use it, place the braid over the solder joint and apply your soldering i...
Flexible Qwiic Cable - Breadboard Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces o...
Load Cell - 10kg, Straight Bar with Hook (HX711)
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the ba...
MagnetoPot Linear Potentiometer 50mm - Male Pins
·
This 50mm MagnetoPot provides potentiometric position feedback without needing a traditional external wiper or actuator. An outside magnet guides the built-in magnetic element, allowing the sensor to report position through a linear potentiometer output.The sealed membrane-style construction make...
SparkPNT GNSS Flex Module - mosaic-X5 & IM19 IMU
·
This GNSS Flex module combines a Septentrio mosaic-X5 multi-band RTK receiver with a Feyman IM19 IMU for high-precision positioning, tilt compensation and dead reckoning. It is aimed at professional surveying, industrial robotics and autonomous navigation applications where reliable position and ...
Metric Threaded Inserts - M6 x 1mm (Pack of 100)
·
These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them out in a grid pattern to turn a wasteboard into a threaded table. Installation ...
Carbide 3D #122 Flat End Mills 0.0312in (3 Pack)
·
This three pack of Carbide 3D flat mills is suited to fabricating flat or prismatic surfaces where small, precise cuts are needed.Each cutter has a 0.0312 inch cutting diameter, making the set useful for precision 3D machining and fabrication work.The cutters are made from solid carbide to help p...
Servo - Generic Continuous Rotation (Micro Size)
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Featu...
3.2 inch 320x240 Colour TFT Touchscreen - ILI9341
·
Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...
GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)
·
This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data and GNSS measurements to provide accurate and continuous positioning...
Spectra Symbol Potentiometer Wiper/Plunger - 14mm
·
This wiper/plunger is Spectra Symbol's recommended actuator for use with linear and rotary SoftPots, ThinPots and especially HotPots.It provides a controlled contact force for actuating compatible potentiometer sensors. While these sensors can operate with multiple contact methods, this wiper/plu...
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
16MHz SMD Crystal Oscillator - 2.0 x 1.6mm, 50ppm
·
This compact crystal oscillator provides a fixed 16MHz clock source in a tiny 2mm x 1.6mm surface-mount package, making it well suited to space-constrained PCB designs.It uses a crystal base resonator with CMOS output and supports a standby power-down function. The oscillator operates across a wi...
Digi XBee® 3 Low-Power LTE-M/NB-IoT, GNSS, no SIM
·
The Digi XBee 3 Global Cellular module is a compact, low-power module designed for rapid integration of cellular IoT capabilities. It combines LTE-M, NB-IoT, and 2G connectivity with Bluetooth Low Energy (BLE) and GNSS positioning in the familiar XBee 20-pin through-hole form factor. Optimised f...
USB 32-Bit Whacker - PIC32MX795 Development Board
The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and ru...
GNSS Multi-Band Magnetic Mount Antenna - 5m (SMA)
The ANN-MB-00 GNSS multiband antenna is extremely unique from other GNSS/GPS antennas in that it is designed to receive both the classic L1 GPS band and the newly launched (started in 2005) L2 GPS band. Additionally, the ANN-MB-00 from u-blox is extremely well built with both a magnetic base with...
Telescopic Antenna SMA - 75 MHz to 1 GHz (ANT500)
This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow. The ANT500 is a 50 ohm antenn...
