All Products
Showing 1-20 of 60 products
2x3-pin 2mm PTH Header Pins and Socket for Teensy 4.1 Ethernet
·
This header pin and socket set is intended for connecting the Ethernet pins on a Teensy 4.1 to a custom circuit board.The socket is designed to be soldered to the bottom side of the Teensy 4.1, making it useful when you need a neat board-to-board connection for a custom PCB design.Specifications:...
Break-Away Header Pin Snapper Tool
A handy tool for cleanly snapping break-away header pins to the exact length you need. Insert the header strip, align to the numbered markings (1–16 pins), and bend the exposed pins to snap them off. Works with both straight and right-angle headers by flipping the tool over. Key Features 1–16 ...
Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall Header
This extra-tall, extra-long 2x20 female stacking header lets you add multiple plates, breakouts and other boards to a Raspberry Pi with a 40-pin GPIO header.The female header section is made taller to help an attached PCB clear the Raspberry Pi Ethernet and USB jacks. The stacking pins are also e...
Stackable Header - 8 Pin (Extended)
An 8-pin female stackable header with extended legs, designed for stacking Arduino shields and prototyping boards. The extra-long pins pass through one board and connect to the next, making it easy to build multi-layer shield stacks. Standard 0.1-inch (2.54mm) pin spacing ensures compatibility w...
0.1 36-pin Strip Right-Angle Female/Socket Header (5 pack)
These single-row right-angle female headers with 0.1" (2.54mm) pitch are an essential building block for electronics projects. Use them to add right-angle socket connections to perfboards, PCBs, and prototyping setups — they accept 22AWG wire or standard male header pins. Each header is 36 pins ...
Through Hole Inline Pogo Pin Header - 9 Pins with 0.1" Spacing
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you can't solder headers to.Most pog...
Straight Male Header - Gold Plated, PTH, 0.1in, 24-Pin
·
This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...
10 Pin IDC Locking Right Angle Header
A right-angle 10-pin IDC box header for PCB mounting, with a locking mechanism to secure ribbon cable connections. The 2.54mm (0.1") pitch double-row header features gold-plated pins and solder-tag attachment. Specifications Type – Double-row box header (plug) Pins – 10 (2×5) Pin Spacing – 2...
Header - 10-pin Male (SMD, 0.1)
A standard 0.1" (2.54 mm) pitch male header pin strip with 10 pins, designed for surface-mount applications where through-hole pins are not suitable. The SMD legs are staggered for stress relief during soldering. Key Features 10-Pin Male Header – Standard 0.1" (2.54 mm) pitch Surface Mount – ...
Color Coded Header for Raspberry Pi
A colour-coded 2×20 pin header for the Raspberry Pi Zero and Zero W that makes it easy to identify pin functions at a glance. Each pin group is colour-coded so you can quickly find power, ground, and GPIO pins without counting or consulting a pinout diagram. Colour Coding Red – 5 V Yellow – 3...
Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40PIN Header
This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple to identify pins at a glance. Since the Raspberry Pi 400's GPIO header faces out...
2x20 pin Female GPIO Header for Raspberry Pi 3/2/B+/A+ - 11mm
This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving access to the GPIO pins underneath. Key Features 40-Pin (2×20) – Matches the...
Stackable 0.100" Female Header with Extra 0.3" Spacer: 2x20-pin, Straight
A 2×20-pin stackable female header designed for the Raspberry Pi GPIO. The extended pins allow HATs and add-on boards to be stacked while still providing access to all 40 GPIO pins for additional connections. This version includes three removable 0.1" spacers, giving it extra height to clear the...
1x6 Stackable Header For Arduino Shield
A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on top of each other. Specifications Pins: 6 (1×6 single row) Type: Female stack...
40 Pin Female Header Strip
A 40-pin single-row female header strip with standard 0.1" (2.54mm) spacing. This versatile header can be trimmed to any length you need, making it perfect for custom projects and Arduino-compatible builds. The sockets accept standard 0.1" male header pins, creating reliable plug-and-socket conn...
12-Pin 0.1in Male Straight PTH Header
·
This is a simple 12-pin male straight header for plated through-hole (PTH) connections. It is handy for adding pins to PCBs, breakout boards and other projects that use the standard 0.1 inch header spacing.If you do not need the full 12-pin length, the header can be broken apart into smaller sect...
2x20 pin Female GPIO Header for Raspberry Pi 3/2/B+/A+ - 3mm
This 2×20 pin female GPIO header with 3 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The short pin height keeps a low profile while still allowing access to the GPIO pins when used with pHAT or HAT boards. Key Features 40-Pin (2×20) – Matches the Raspberry Pi 40-pin GP...
Right-Angle Male Header - 3 Pin, 0.1in PTH
·
This is a simple 3-pin male right-angle header for through-hole PCB mounting. It is handy when you need pins to exit sideways from a board instead of straight up.The header uses the standard 0.1in pin spacing, making it suitable for common breadboard and prototyping layouts that use 0.1in pitch c...
GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 - Tall 2x20 Female Header
This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...
Header - 6-pin Male (SMD, 0.1, Right Angle)
A surface-mount 6-pin right-angle male header with standard 2.54 mm (0.1 in) pitch between pins and between rows. Ideal for adding a programming or serial header to compact PCB designs where a low-profile, right-angle connection is needed. Key Features 6 Pins – Single-row male header Right-An...
