All Products
AI Overview
Here are the main SparkFun options found—ranging from beginner kits to MicroMod/Qwiic boards and sensors.
Starter kits (best if you want a complete learning bundle)
- SparkFun Inventor's Kit - v4.1.2 ($196.35) — all-in-one electronics kit; v4.1.2 mainly updates the carrying case vs v4.1.
- Inventor's Kit for MicroPython - KIT-29326 ($238.60) — beginner-friendly kit focused on MicroPython projects, progressing from basics to more advanced builds.
Wireless / IoT dev boards
- SparkFun Thing Plus - ESP32 WROOM (USB-C) ($72.73) — ESP32-WROOM, Wi‑Fi + Bluetooth, USB‑C, Feather-compatible Thing Plus form factor.
- Thing Plus RP2350 Wireless Development Board ($63.02) — built around Raspberry Pi RP2350, geared for connected/battery IoT builds with the Thing Plus ecosystem.
- Thing Plus RP2350 Wireless Development Board (Ding & Dent) ($67.91) — Ding & Dent variant of the RP2350 Thing Plus platform.
Qwiic / sensor & interface modules (I2C/Qwiic-friendly add-ons)
- LIS3DH Triple Axis Accelerometer Breakout (Qwiic) ($8.81) — 3‑axis accelerometer breakout with Qwiic.
- SparkFun Micro 6DoF IMU Breakout - LSM6DSV16X (Qwiic) ($50.08) — 6‑axis IMU (accelerometer + gyro) with Qwiic.
- Qwiic Directional Pad (PRT-26851) ($14.73) — 5‑way navigation input over I2C/Qwiic.
- Qwiic Alphanumeric Display - Pink ($20.60) — 14‑segment alphanumeric display via Qwiic.
- Qwiic MultiStar Constellation Ornament ($10.74) — Qwiic hub that adds 4 extra Qwiic ports.
Power / expansion / carrier boards
- Ideal Diode Breakout ($10.96) — power-path help for hot swaps/one-way voltage control.
- MicroMod STM32F405 Processor Board ($43.04) — STM32F405 (Cortex‑M4) on a swappable MicroMod M.2-style module.
- MicroMod Asset Tracker Carrier Board - SARA-R510AWS ($267.25) — LTE‑M carrier built around u-blox SARA-R510AWS with AWS IoT ExpressLink.
- Ethernet Adapter for Teensy 4.1 ($9.45) — adds wired Ethernet capability for Teensy 4.1 projects.
- AgXRP Pump & Soil Moisture Sensor Expansion Pack (Beta) ($87.63) — expansion pack for AgXRP adding an additional pump + soil moisture zone.
What kind of SparkFun item are you looking for?
Collections
Showing 1741-1760 of 2309 products
Hobby Motor with Encoder - Plastic Gear (Red)
·
Add motion and feedback to small robotics builds with this single DC gearmotor and integrated Hall effect speed encoder. Instead of simply driving a motor open-loop, your microcontroller can count encoder pulses to track wheel rotation and speed for more accurate navigation and speed control.The ...
SpectraFlex Flex Sensor - 95mm with Male Pins
·
SpectraFlex is a flexible bend sensor for measuring angular deflection in research, industrial and personal electronics projects. As the sensor bends, its resistance changes, making it suitable for reading movement or flex through a simple analogue circuit.This 95mm version includes male pins for...
2.8 inch 320x240 Colour Touchscreen - ILI9341
·
This colour TFT touchscreen is a compact display module for adding high-resolution graphics to compatible maker projects. It provides a 320x240 pixel display area in a 2.8 inch format, using the ILI9341 controller.The display is recommended for use with Teensy 3.2 through to Teensy 4.1, making it...
USB-C Wall Adapter with Cable, US Plug, 6–12V
·
This USB wall adapter provides a compact mains power option for USB-powered devices, with an AC100-240V input range for use with suitable mains supplies.The adapter supports variable output ranges of 6V-6.5V/3A, 6.5V-9V/2A, and 9V-12V/1.5A. It is supplied with a USB to USB-C cable, helping it con...
Hobby Gearmotor - 65 RPM (Right Angle, Pair)
These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a right angle, you will also be able to track and c...
Molex Flexible GNSS Antenna - U.FL (Adhesive)
The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS, Galileo, BeiDou, and GLONASS in three different frequency bands (1561 +/-3MHz,...
LTE Antenna 175mm Duck SMA Male - VT4GLTE-R-10
This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter, this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield.
Basic 16x2 Character LCD - Black on Green 3.3V
A classic 16×2 character LCD running at 3.3V, with a yellow LED backlight and black characters on a green background. Uses the industry-standard ST7066/HD44780 parallel interface — library support is available for virtually every microcontroller platform, making it straightforward to integrate in...
10-Way 3.5mm Right-Angle Terminal Block Header
·
This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.It is well suited to I/O signals and power lines that may need to be disconnected...
Raspberry Pi 400 Personal Computer (Unit Only)
The Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, integrated into a keyboard. By incorporating the board into a keyboard, it removes the need for a case and other accessories normally needed to run a Raspberry and creates a more clean configuration. It makes for the perfe...
JST Right-Angle Connector - Through-Hole 2-Pin
A 2-pin right-angle JST PH series connector for through-hole PCB mounting. With a 2 mm pin pitch, this is the standard connector used on most single-cell LiPo batteries, making it ideal for battery-powered projects and charging circuits. Key Features JST PH Series – Industry-standard 2 mm pitc...
JST Right Angle Connector - Through-Hole 3-Pin
A 3-pin right-angle JST PH series through-hole connector with 2mm pin spacing. These compact connectors provide a solid locking connection and are rated for moderate current, making them a reliable choice for PCB-mounted sensor and peripheral connections. Commonly used to interface with Sharp in...
Jumper Wires Standard 7 M/M - 30 AWG (30 Pack)
If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that come with the SparkFun Inventor’s Kit, they’re less rugged than the premium jumper ...
2-in-1 mSATA & PCI Express Mini Card Connector
·
This 52-pin connector is a 2-in-1 socket for mSATA and PCI Express Mini Card applications. It is supplied as an individual female connector for use on your own PCB designs.The connector is designed for surface-mount soldering and includes a board guide to help with card alignment. With a dual rea...
Breadboard - Translucent Self-Adhesive (Clear)
Ever wonder what goes on inside these things? Well this clear bread board might enlighten. Beyond the clear plastic, this is really just a regular, solderless breadboard. It has 2 power buses, 30 columns, and 10 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two ...
Techspray Solder Wick #2 Yellow 1.4mm x 1.524m
·
This Techspray solder wick is a pre-fluxed copper desoldering braid for removing solder from PCB joints, pads and accidental solder bridges. It is a handy bench consumable for component replacement, PCB rework, repair and prototyping.To use it, place the wick over the solder joint and apply your ...
JST-SH 2-Pin Right-Angle Connector - 1mm Pitch
·
This compact 2-position JST-SH connector is a surface-mount part for adding a small cable connection to your PCB.It uses a right-angle layout, helping route the mating cable parallel to the board where vertical clearance is limited. The 1mm pitch suits tight electronics builds and compact maker p...
Battery Holder - 4xAA to Barrel Jack Connector
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a number of other products) allowing you to easily make your project battery powered. ...
Mean Well Switching Power Supply - 24VDC 14.6A
This is the big kahuna from Mean Well, a 350W single output switching power supply. This power supply is extremely reliable and beefy, able to output 24VDC at 14.6A. If you’ve been looking for a powerful power supply for your next big project, look no further. We can definitely attest to its dura...
Experiential Robotics Platform (XRP) - DIY Kit
Product Overview The Experiential Robotics Platform (XRP) is a hands-on, comprehensive robotics platform. It includes everything needed to build and program a robot to perform beginner through advanced tasks - building the foundation for innovative thinking, science, engineering, and problem-sol...
