All Products
AI Overview
Popular DFRobot picks (by project type)
- Power / off-grid: DFRobot Solar Power Manager Kit with 9V Panel (9V panel, compact solar power management) — $115.05.
Industrial / outdoor sensing (RS485 / IP-rated)
- Weather station (all-in-one): DFRobot Ultrasonic 7-in-1 RS485 Weather Sensor (7-in-1, RS485) — $612.20.
- Water turbidity: DFRobot SEN0710 RS485 Industrial Turbidity Sensor (0-1000 NTU) (0–1000 NTU, RS485) — $563.00.
- Water conductivity (EC): DFRobot RS485 Industrial Water EC Sensor K=1 (K=1, pre-calibrated, RS485) — $366.35.
- Water pH: DFRobot RS485 Modbus IP68 Water Quality pH Sensor (IP68, Modbus-RTU/RS485) — $317.15.
- Water ORP: DFRobot Industrial RS485 ORP Sensor - IP68 ModBus-RTU (IP68, Modbus-RTU/RS485) — $440.10.
- Ultrasonic ranging (IP67): DFRobot SEN0627 Small-Angle Ultrasonic Ranging Sensor 8m IP67 (25–800 cm, IP67, 15° FOV) — $291.05.
- Non-contact liquid level (radar): DFRobot SEN0676 80GHz mmWave Liquid Level Sensor - 40m UART (80GHz FMCW, up to 40 m, UART) — $145.05.
Wireless / IoT
- Private LoRaWAN gateway (EU868): DFRobot LoRaWAN Gateway with SIoT & Node-RED - EU868 (EU868, SX1302 8-channel, local server + Node-RED) — $366.35.
- BLE sensor broadcasting (5-pack): DFRobot Fermion BLE Sensor Beacon Pack - 5 Pack (turn 3.3V sensors into BLE nodes) — $41.55.
Robotics / UI / modules & accessories
- IMU + barometer: DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280) (BNO055 orientation + BMP280 pressure/temp) — $63.65.
- ESP32 touchscreen: DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32 (3.5" IPS, 480×320, capacitive touch) — $73.50.
- Wiring (Gravity → DuPont): DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack (30 cm, tagged signal labels, 5-pack) — $16.00.
- Lighting: DFRobot FIT0840 5V Flexible LED Strip, Purple - 60 LEDs/m (5V, 60 LEDs/m, ultra-thin) — $14.50.
Edge AI / vision
- Offline face/palm/QR recognition: DFRobot SEN0677 Offline AI 3D Vision Recognition Sensor (on-device AI, face + palm vein + QR decode) — $120.45.
Collections
Showing 61-80 of 1919 products
DFRobot RS485 Fluorescence Dissolved Oxygen Sensor - Freshwater
·
This optical dissolved oxygen probe is designed for measuring DO levels in freshwater environments such as aquaculture tanks, rivers, lakes, reservoirs and treatment facilities. It uses fluorescence quenching, measuring the phase shift of light caused by oxygen molecules, rather than relying on a...
DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack
·
These tagged Gravity cables help keep wiring clear when a project has lots of similar-looking connections. Each lead carries I2C/UART pin labels, making it easier to identify signals during wiring, testing and debugging.The wire sequence is kept the same at both ends and follows the latest DFRobo...
DFRobot DFR1216 Expansion Board for UNIHIKER M10/K10 & micro:bit
·
This multi-function expansion board adds power, I/O and drive capability to UNIHIKER M10/K10 and micro:bit projects. It is designed for mobile robots, portable interactive builds and maker projects that need more connectivity than the main controller can provide on its own.The board expands your ...
DFRobot DFR1120-868 LoRaWAN Control Terminal - EU868, RS485, 4km
·
Build remote monitoring and control systems around a single DIN-rail RTU for EU868 LoRaWAN networks. This 868MHz control terminal is designed for industrial IoT, smart agriculture, building automation and environmental monitoring where long-range wireless telemetry and local device control are ne...
DFRobot DFRduino UNO R3 Kit with IO Expansion Shield & USB Cable
·
This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source development environment, which uses the Processing / Wiring language.The board is based ...
Gravity: Digital LED String Lights (Warm White) For Arduino - DFrobot
A string of 40 warm white LEDs on a 4-metre wire, controlled via a digital signal through the DFRobot Gravity interface. Create fading effects with PWM or power at a fixed voltage for steady illumination. Ideal for decorative lighting, ambient displays, and creative electronics projects. Key Fea...
Flange Nuts
These nuts can be used to install your circuit boards, sensors and mechanical mountings. The wide flange at one end with an uneven surface eliminates the need for using extra washers to keep the nut tightly secured. SPECIFICATIONS Nut size: M3 SHIPPING LIST M...
GDI-Line-15CM
This is a 15cm 18Pin FPC flat flex Ribbon cable specially designed for working with GDI. The cable is well durable and hard to be damaged even when bent sharply. There are insulted pads on the back that can closely contact with FPC seat to ensure the fluency of image and video transmissi...
Beetle Shield
The Beetle shield is designed to attach a Beetle (DFR0282) controller for easy connecting servos and sensors. SPECIFICATIONS Operating voltage: 3 - 5V Compatible with DFRobot Beetle DOCUMENTS Wiki( Beetle shield) SHIPPING LIST ...
GDL-Line-10CM
This 10 cm FPC flat-flex ribbon cable is designed for use with DFRobot GDI (General Display Interface) displays. The 18-pin reverse-contact cable is durable and resistant to damage even when bent sharply, with insulated pads on the back for reliable contact with the FPC connector. Specifications...
micro:Gamepad
A gamepad expansion board for the BBC micro:bit. Plug in your micro:bit and it becomes a wireless remote controller or game console. The gamepad features eight programmable buttons (D-pad: up, down, left, right; face buttons: X, Y; front buttons: A, B), plus an onboard vibration motor, buzzer, an...
EL Wire - red
Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very low current. We have 10 different colors of EL Wire to choose from. APPLICATIONS...
Mini Photocell
This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It changes resistance depending on the amount of light it is exposed to. These little sensors can be used in light-interacting projects. SPECIFICATIONS Head ...
Mini USB cable
USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. mini USB is found on newer hand held devices like cell phones and portable media devices. This is the cable you need for the DFRduino Nano, arduino FI...
Wifi Bee-RN-XV
The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for X...
LilyPad Buzzer
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. LilyPad is a wearable e-textile technology developed by Leah Bue...
EL Wire - blue
Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very low current. We have 10 different colors of EL Wire to choose from. APPL...
Mini Touch Kit
This is a cool touch sensor from DFRobot. You can hook it up to the IO Expansion shield (for arduino) directly. It includes a metallic tape with a sticky side. This make it possible for you to place your sensors anywhere you want. So, if you get sick of the typical push buttons, try this in...
Magnetic Switch
This magnetic switch consists of two parts: a reed switch sensor with cable and a magnet trigger in a plastic housing. When the magnet is brought within approximately 1 cm of the sensor, the reed switch closes, allowing you to detect position changes, door/window states, and proximity events. Th...
NFC Tag (Round)
NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. This Mifare-...
