All Products
AI Overview
If you meant a stepper motor control shield for Arduino/CNC projects, these are the closest matches:
CNC/GRBL stepper shields (Step/Dir, multi-axis)
- Arduino CNC Shield V3.51 - GRBL v0.9 compatible - Uses Pololu Drivers (4-axis, Pololu-style plug-in drivers, GRBL on Arduino Uno) — $37.70
- V3 Engraver 3D Printer CNC Shield Expansion Board A4988 Driver (4 driver slots for A4988-style drivers; common for small CNC/engraver builds) — $8.30
- Synthetos gShield (grblShield) V5 (3-axis CNC stepper driver shield designed for grbl) — $151.80
Arduino stepper driver shields (single/dual stepper)
- Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) (dual bipolar stepper control on an Arduino shield) — $33.90
- TMC260 Stepper Motor Driver Shield For Arduino Arduino stepper driver shield option for more powerful stepper projects — $50.25
Motor shields that can also run steppers (often simpler, lower-current)
- Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3] I2C motor shield that can run steppers/DC/servos — $42.35
- 4 Channel I2C Motor Shield-V1.1 I2C shield for 4 DC or 2 steppers — $24.05
- Four - Channels Motor Shield For Arduino budget motor shield for 4 DC or 2 steppers — $6.15
If you’re on Raspberry Pi (HAT-style)
- Motor shield for Raspberry Pi HAT that can drive 4 DC or 2 steppers — $61.25
What platform are you using the stepper control shield with?
Showing 41-60 of 100 products
Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it....
TB6612FNG Dual Motor Driver Carrier
This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) ma...
Arduino Motor Shield R3
INTRODUCTION The Arduino Motor Shield is based on L298 (a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors). It helps you drive two DC motors with Arduino board as well as control the speed and direction of the ...
Motor party add-on pack for Arduino
Make your own Arduino motor party with a motor shield and a fine assortment of motors! New! we've upgraded the shield to our new version 2, with more powerful drivers, and uses fewer pins to boot! Included in this add-on pack is: Adafruit Motor Shield v2 for Arduino 6 Volt DC hobby motor Smal...
Arduino Compatible Motor Servo Controller Module
This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A peak) with thermal protection, and the dedicated servo ports use the Arduino's h...
DC Motor in Micro Servo Body
This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less e...
4 Channel I2C Motor Shield-V1.1
This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handled via the I2C bus, freeing up digital pins for other uses. The stackable design...
Leaper - Upgraded RFID Stepper Driver Learning Kit for Arduino
The Leaper Upgraded Learning Kit is a comprehensive Arduino starter kit that includes advanced modules such as an RFID reader, stepper motor driver, real-time clock, and a wide range of sensors and components. Built around an UNO R3 compatible board, it provides everything you need to learn Ardui...
DreamMaker Overlord 3D Printer Mainboard V1.0
·
This control board is designed for the DreamMaker Overlord 3D Printer, acting as the central controller for analysing sensor data and driving the actuators needed to complete the printing process.It is based on the Arduino Mega2560, providing plenty of GPIO resources for structure and motion-cont...
Motor shield for Raspberry Pi
A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak) per channel. The board includes breakout connectors for IR line sensors and an...
Big Easy Driver
The Big Easy Driver is a stepper motor driver board for bipolar stepper motors up to 2 A per phase, based on the Allegro A4988 driver chip. Designed by Brian Schmalz, it's the successor to the popular Easy Driver board. It defaults to 16-step microstepping mode and includes onboard 5 V and 3.3 V...
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board
The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applications, operating from 2.7V to 10.8V motor power. The DRV8833 features built-in...
H-Bridge Motor Driver 1A
The SN754410 is a quad half H-bridge motor driver IC capable of driving DC motors, stepper motors, and other inductive loads. It accepts TTL 5V logic inputs and can drive motors from 4.5V to 36V at up to 1A continuous output current per channel. A pin-compatible replacement for the popular L293D...
Romeo V2- Arduino Robot Board (Arduino Leonardo) with Motor Driver
RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel (3A peak). It's the same driver chip used in the Adafruit Motor Shield and Motor...
TinyG CNC Controller Board v8
The TinyG project is a high performance, USB based CNC 6-axis controller that supports XYZ linear and ABC rotary axes with 4 motor outputs. It is designed for small CNC applications and other applications that require highly controllable motion control. TinyG is meant to be a complete embedded so...
Synthetos gShield (grblShield) V5
The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con...
Adafruit CRICKIT HAT for Raspberry Pi
The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted NeoPixel driver, and a 3W I2S audio amplifier — all managed over I2C via the Adafru...
Adafruit CRICKIT FeatherWing for any Feather
The Adafruit CRICKIT FeatherWing is a robotics and electronics driver board that plugs into any Feather mainboard. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit seesaw co-processor, so it only uses t...
FAN Module for Stepmotor
Description STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control. It is built with MEGA328P has been flashed GRBL firmware. The module comunicates with M5Core via I2C(0x70) Integrated...
