All Products

SKU: DF-DFR1225 · MPN: DFR1225

Repair a damaged Maqueen Plus V3 motor without replacing the whole robot. This official DFRobot N20 motor accessory kit is made for quick classroom or project repairs when dust, hair, particles or rough handling have jammed gears or damaged a motor.It is compatible with Maqueen Plus V3 models MBT...

SKU: DF-SEN0365

This compact breakout uses the AMS AS7341 spectral sensor IC to measure colour across multiple visible-light bands. It is designed for projects that need more detail than a basic RGB colour sensor, with channels covering the visible spectrum plus near-IR and an unfiltered channel.The board includ...

SKU: DF-SEN0693 · MPN: SEN0693

Built around the Bosch BMI323, this compact Fermion module combines a 3-axis accelerometer and a 3-axis gyroscope on a 16 mm × 16 mm board. It provides high-rate acceleration and angular velocity data over I²C for embedded motion sensing, wearables, robotics, battery-powered IoT nodes and compact...

SKU: DF-SER0070 · MPN: SER0070

The ST3215 is an intelligent serial bus servo for robotics and automation projects that need strong torque, position feedback and tidy wiring. It runs from a rated 12V supply and delivers 30kg.cm stall torque through a coreless motor and metal gear train.A 12-bit magnetic encoder provides 360° ab...

SKU: DF-SEN0680 · MPN: SEN0680

This optical dissolved oxygen probe is designed for measuring DO levels in freshwater environments such as aquaculture tanks, rivers, lakes, reservoirs and treatment facilities. It uses fluorescence quenching, measuring the phase shift of light caused by oxygen molecules, rather than relying on a...

SKU: DF-SEN0681 · MPN: SEN0681

This sensor is designed for monitoring dissolved oxygen in seawater and other high-salinity applications. It uses fluorescence quenching rather than a traditional electrochemical cell, so it does not consume oxygen during measurement and does not require electrolyte replacement.The probe measures...

SKU: DF-SEN0707 · MPN: SEN0707

This industrial-grade water electrical conductivity sensor combines the probe and housing in one integrated unit for straightforward installation and reliable EC measurement. With an electrode constant of K=10, it is suited to higher-conductivity water monitoring across aquaculture, tap water, dr...

SKU: DF-SEN0712 · MPN: SEN0712

This industrial-grade residual chlorine sensor is designed for precise, reliable water quality monitoring in demanding environments. Its integrated probe and housing measure residual chlorine concentrations, specifically hypochlorous acid and hypochlorite ions, over a 0 to 10 mg/L range.The senso...

SKU: DF-DFR1093-915 · MPN: DFR1093-915

Build a private LoRaWAN IoT network for home automation, environmental monitoring or maker projects without relying on an external cloud service. This indoor gateway includes a built-in SIoT local server and pre-installed Node-RED, so sensor data can be processed locally for dashboards, rules and...

SKU: DF-DFR1120-868 · MPN: DFR1120-868

Build remote monitoring and control systems around a single DIN-rail RTU for EU868 LoRaWAN networks. This 868MHz control terminal is designed for industrial IoT, smart agriculture, building automation and environmental monitoring where long-range wireless telemetry and local device control are ne...

SKU: DF-SEN0715 · MPN: SEN0715

This compact capacitive sensor detects the presence or level of liquid through non-metallic container walls, so it does not need to touch the liquid. That helps avoid corrosion, contamination and media adhesion when monitoring aggressive liquids such as strong acids, alkalis and toxic liquids in ...

SKU: DF-SEN0711 · MPN: SEN0711

Built for submerged water monitoring, this industrial-grade probe measures ammonia nitrogen concentration in water, including free ammonia (NH3) and ammonium ions (NH4+). It combines the probe and housing into an integrated design for a simpler, more robust installation.The sensor communicates ov...

SKU: DF-FIT0691 · MPN: FIT0691

This 20cm 18-pin FPC flat flex ribbon cable is made for connecting compatible display modules and controller boards that use the GDI interface. Its reverse 18-pin layout and 0.5mm pitch suit compact display projects where tidy, low-profile internal wiring is needed.The flexible polyimide-based ri...

SKU: DF-FIT0692 · MPN: FIT0692

This 30 cm flat flex ribbon cable is made for connecting compatible GDI display modules to controller boards. It uses an 18-pin reverse FPC layout with a 0.5 mm pitch, helping keep display wiring neat in compact electronics builds.The flexible polyimide construction is designed to handle tight ro...

SKU: DF-SEN0659 · MPN: SEN0659

This industrial CO2 probe is built for reliable carbon dioxide monitoring in environments such as indoor air quality systems, pipelines, greenhouses and fresh air systems. It uses NDIR sensing to measure CO2 from 400 to 5000 PPM and supports manual calibration for dependable readings.The IP65-rat...

SKU: DF-SER0072 · MPN: SER0072

This industrial-grade motion actuator is built for high-load applications that need serious torque, accurate position control and rugged construction. It combines a 24V brushless motor with a 12-bit magnetic encoder for stable, high-resolution angle feedback.With stall torque up to 600kg·cm, a 39...

SKU: DF-SEN0716 · MPN: SEN0716

This industrial non-contact liquid level sensor uses capacitive sensing to detect liquid through non-metallic container walls, so it does not need to touch corrosive, viscous or contaminated liquids. It is suited to liquids such as milk, honey, latex, blood, engine oil and acid or alkaline soluti...

SKU: DF-SEN0714 · MPN: SEN0714

This industrial-grade water quality probe measures blue-green algae, also known as cyanobacteria, in water using the fluorescence principle. The probe and housing are integrated into a single waterproof unit for straightforward deployment in rivers, lakes, ponds and other monitoring sites.It uses...

SKU: DF-FIT0875 · MPN: FIT0875

This compact COB LED strip is a bright white lighting module for indoor decoration, display lighting and battery-powered projects. It uses 16 LEDs under a silicone encapsulated surface to help protect the chips and support longer service life.The strip runs from DC 5V, giving you flexible power o...

SKU: DF-FIT0877 · MPN: FIT0877

This compact COB light strip is a bright yellow 5V lighting module for decorative and embedded illumination projects. It uses 16 LED chips under silicone encapsulation to create a smooth, continuous luminous surface with minimal hotspots and shadowing.The low-voltage DC 5V input makes it practica...