Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Gravity: Arduino Analog Capacitive Soil Moisture Sensor- Corrosion Resistant
SKU: DF-SEN0193 | Brand: DFRobot
The Gravity Analogue Capacitive Soil Moisture Sensor measures soil moisture using capacitive sensing rather than resistive probes, providing significantly better corrosion resistance and longer service life. Made from...
Delivered by Fri 19 Jun
Gravity: Water Flow Sensor (1/2) For Arduino
SKU: DF-SEN0217 | Brand: DFRobot
INTRODUCTION The Gravity Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usual...
Delivered by Fri 19 Jun
Fermion: MEMS Hydrogen H2 Gas Detection Sensor (Breakout, 0.1-1000ppm)
SKU: DF-SEN0572 | Brand: DFRobot
The Fermion MEMS H2 Sensor is a compact hydrogen gas detection module using micro-electromechanical system (MEMS) technology. It provides qualitative measurement of hydrogen concentration from 0.1 to 1000 ppm via an a...
Delivered by Wed 10 Jun
Fermion: MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)
SKU: DF-SEN0564 | Brand: DFRobot
The Fermion MEMS Carbon Monoxide Sensor uses micro-electromechanical system (MEMS) technology to detect CO gas concentrations from 5 to 5,000 ppm. Its compact size, low power consumption, short preheat time, and fast ...
Delivered by Wed 10 Jun
Gravity: Analog pH Sensor/Meter Kit V2
SKU: DF-SEN0161-V2 | Brand: DFRobot
The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental wa...
Delivered by Fri 19 Jun
Gravity: Arduino Hydrogen Gas Sensor (MQ8)
SKU: DF-SEN0133 | Brand: DFRobot
This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range...
Delivered by Fri 19 Jun
Fermion: MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0566 | Brand: DFRobot
Fermion: MEMS Volatile Organic Compounds VOC Gas Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA...
Delivered by Wed 10 Jun
Analog CO/Combustible Gas Sensor(MQ9)
SKU: EC-SES90101S | Brand: Elecrow
The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it su...
Delivered by Wed 24 Jun
Gravity: Throw-in Type Liquid Level Transmitter
SKU: DF-KIT0139 | Brand: DFRobot
This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology. The level transmitter receives different pressures a...
Delivered by Fri 19 Jun
Gravity: Arduino ORP Meter V1.0
SKU: DF-SEN0165 | Brand: DFRobot
In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water...
Delivered by Wed 10 Jun
SparkFun Soil Moisture Sensor (with Screw Terminals)
SKU: SF-SEN-13637 | Brand: SparkFun
A simple breakout board for measuring moisture in soil and similar materials. The two large exposed pads act as probes — functioning as a variable resistor where higher moisture means better conductivity, lower resist...
Delivered by Fri 19 Jun
ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)
SKU: AF-163 | Brand: Adafruit
A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...
Delivered by Wed 10 Jun
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
SKU: DF-SEN0219 | Brand: DFRobot
The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 ...
Delivered by Wed 10 Jun
DIY Gas Detector - Learn to solder
SKU: LB-LS4968 | Brand: Little Bird
MQ-2 Gas Sensor - Smoke & Flammable Gas Detector The MQ-2 is a reliable, easy-to-use gas sensor that’s ideal for detecting flammable gases like LPG, methane, propane, and even smoke. At its core is tin dioxide (SnO₂...
Delivered by Wed 10 Jun
Fermion: MEMS Ethanol EtOH Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0569 | Brand: DFRobot
The Fermion MEMS Ethanol (EtOH) Gas Detection Sensor uses micro-electromechanical system (MEMS) technology for compact, low-power ethanol gas detection. With a detection range of 1–500 ppm, it provides qualitative mea...
Delivered by Wed 10 Jun
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0568 | Brand: DFRobot
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...
Delivered by Wed 10 Jun
Octopus Rain/Steam Sensor
SKU: EF-EF04024 | Brand: ElecFreaks
This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.You even co...
Delivered by Wed 10 Jun
SparkFun Current Sensor Breakout - ACS723 (Low Current)
SKU: SF-SEN-14544 | Brand: SparkFun
The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect s...
Delivered by Fri 19 Jun
Alcohol sensor for Arduino
SKU: LB-LR0205 | Brand: Little Bird
An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...
Delivered by Wed 10 Jun
Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino (Pre-Order)
SKU: DF-SEN0237-A | Brand: DFRobot
This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers. This product is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many wa...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
