Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
SparkFun OpenPIR
SKU: SF-SEN-13968 | Brand: SparkFun
The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. Passive infrared (PIR) sensors are able to detect motion in a small/local area –– they’re the senso...
Delivered by Fri 20 Nov
SparkFun Weather Shield
SKU: SF-DEV-13956 | Brand: SparkFun
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional senso...
Delivered by Fri 20 Nov
Thermistor 10K
SKU: SF-SEN-00250 | Brand: SparkFun
10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...
Delivered by Fri 20 Nov
2-Axis Joystick
SKU: AF-245 | Brand: Adafruit
The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of mic...
Delivered by Fri 20 Nov
Thermocouple Type-K Glass Braid Insulated [K]
SKU: AF-270 | Brand: Adafruit
A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface te...
Delivered by Mon 14 Dec
Wired Miniature Electret Microphone
SKU: AF-1935 | Brand: Adafruit
That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly sma...
Delivered by Mon 14 Dec
Force Sensitive Resistor - Small
SKU: SF-SEN-09673 | Brand: SparkFun
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...
Delivered by Fri 20 Nov
Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range
SKU: DF-DFR1132 | Brand: DFRobot
##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction streng...
Delivered by Tue 1 Dec
Sensor ELECFREAKS PlanetX MQ3
SKU: EF-EF05032 | Brand: ElecFreaks
An alcohol vapour sensor module from the ELECFREAKS PlanetX range, designed for use with micro:bit via an RJ11 connector. The MQ3 sensor uses a tin dioxide (SnO2) sensing element whose conductivity increases with alco...
Delivered by Fri 4 Dec
Sensor Trimpot ELECFREAKS PlanetX
SKU: EF-EF05018 | Brand: ElecFreaks
An analogue trimpot (trimmer potentiometer) sensor module from the ELECFREAKS PlanetX series, designed for use with micro:bit via RJ11 connection. The potentiometer provides stepless rotation over a 0°–300° range, out...
Delivered by Fri 20 Nov
Line Follower Sensor
SKU: SF-SEN-24048 | Brand: SparkFun
A line follower sensor gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared ligh...
Delivered by Tue 1 Dec
MyoWare 2.0 Arduino Shield
SKU: SF-DEV-18426 | Brand: SparkFun
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...
Delivered by Tue 1 Dec
ESP32-C3-MINI-1-N4 Module (PCB antenna)
SKU: DF-DFR0809 | Brand: DFRobot
The ESP32-C3-MINI-1-N4 is a compact Wi-Fi and Bluetooth Low Energy module from Espressif, built around the ESP32-C3FN4 chip with a 32-bit RISC-V single-core processor running at up to 160 MHz. It includes 4 MB of embe...
Delivered by Fri 20 Nov
Adafruit Bonsai Buckaroo - micro:bit & CLUE Plant Care Helper
SKU: AF-4534 | Brand: Adafruit
The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...
Delivered by Mon 14 Dec
Adafruit Touch Screen Breakout Board for 4 pin 1.0mm FPC
SKU: AF-3575 | Brand: Adafruit
The Adafruit Touch Screen Breakout Board provides a simple way to connect a 4-wire resistive touch panel with a 1.0mm pitch FPC connector to your project. The connector is soldered onto a compact breakout board, with ...
Delivered by Fri 20 Nov
MonkMakes Air Quality Kit for micro:bit
SKU: MM-SKU00086 | Brand: Monk Makes
The MonkMakes Air Quality Kit for micro:bit is based around the MonkMakes Air Quality Sensor. This add-on for the BBC micro:bit measures the quality of the air in a room - how stale the air is. The outputs of the Air ...
Delivered by Fri 20 Nov
Thumb Joystick - Deluxe
SKU: SF-COM-16273 | Brand: SparkFun
A 16 mm deluxe thumb joystick similar to the analogue sticks found in PlayStation controllers. Two 10K potentiometers provide analogue position data for the full range of motion on both axes, and a built-in select but...
Delivered by Tue 1 Dec
Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit
SKU: EF-EF04079 | Brand: ElecFreaks
Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...
Delivered by Fri 20 Nov
Strain Gauge Load Cell - 4 Wires - 1Kg
SKU: AF-4540 | Brand: Adafruit
A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge change...
Delivered by Mon 14 Dec
Strain Gauge Load Cell - 4 Wires - 5Kg
SKU: AF-4541 | Brand: Adafruit
A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge change...
Delivered by Mon 14 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared