All Products
AI Overview
Here are the main SparkFun options found—ranging from beginner kits to MicroMod/Qwiic boards and sensors.
Starter kits (best if you want a complete learning bundle)
- SparkFun Inventor's Kit - v4.1.2 ($196.35) — all-in-one electronics kit; v4.1.2 mainly updates the carrying case vs v4.1.
- Inventor's Kit for MicroPython - KIT-29326 ($238.60) — beginner-friendly kit focused on MicroPython projects, progressing from basics to more advanced builds.
Wireless / IoT dev boards
- SparkFun Thing Plus - ESP32 WROOM (USB-C) ($72.73) — ESP32-WROOM, Wi‑Fi + Bluetooth, USB‑C, Feather-compatible Thing Plus form factor.
- Thing Plus RP2350 Wireless Development Board ($63.02) — built around Raspberry Pi RP2350, geared for connected/battery IoT builds with the Thing Plus ecosystem.
- Thing Plus RP2350 Wireless Development Board (Ding & Dent) ($67.91) — Ding & Dent variant of the RP2350 Thing Plus platform.
Qwiic / sensor & interface modules (I2C/Qwiic-friendly add-ons)
- LIS3DH Triple Axis Accelerometer Breakout (Qwiic) ($8.81) — 3‑axis accelerometer breakout with Qwiic.
- SparkFun Micro 6DoF IMU Breakout - LSM6DSV16X (Qwiic) ($50.08) — 6‑axis IMU (accelerometer + gyro) with Qwiic.
- Qwiic Directional Pad (PRT-26851) ($14.73) — 5‑way navigation input over I2C/Qwiic.
- Qwiic Alphanumeric Display - Pink ($20.60) — 14‑segment alphanumeric display via Qwiic.
- Qwiic MultiStar Constellation Ornament ($10.74) — Qwiic hub that adds 4 extra Qwiic ports.
Power / expansion / carrier boards
- Ideal Diode Breakout ($10.96) — power-path help for hot swaps/one-way voltage control.
- MicroMod STM32F405 Processor Board ($43.04) — STM32F405 (Cortex‑M4) on a swappable MicroMod M.2-style module.
- MicroMod Asset Tracker Carrier Board - SARA-R510AWS ($267.25) — LTE‑M carrier built around u-blox SARA-R510AWS with AWS IoT ExpressLink.
- Ethernet Adapter for Teensy 4.1 ($9.45) — adds wired Ethernet capability for Teensy 4.1 projects.
- AgXRP Pump & Soil Moisture Sensor Expansion Pack (Beta) ($87.63) — expansion pack for AgXRP adding an additional pump + soil moisture zone.
What kind of SparkFun item are you looking for?
Collections
Showing 181-200 of 2306 products
SparkFun Block for Intel Edison - ADC
The Intel® Edison is an ultra-small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Powered by the Inte...
SparkFun OpenLog Artemis (without IMU)
The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-enabled sensors — no coding required. Simply plug in a compatible sensor, power up...
SparkFun Solder-able Breadboard - Mini
This is the Mini SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces i...
SparkFun LiPo Charger Basic - Mini-USB
A simple single-cell LiPo/Li-Ion battery charger based on the MCP73831T charge controller IC. Connect a battery via the JST connector, plug in a Mini-USB cable for power, and the board handles charging automatically with a status LED to indicate progress. Key Features MCP73831T Charge Controll...
SparkFun Beefy 3 - FTDI Basic Breakout
The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to power a 3.3V project directly from the board's USB connection. The 6-pin header...
SparkFun GPS Breakout - XA1110 (Qwiic)
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and serial p...
SparkFun RedBot Sensor - Wheel Encoder
Knowing where your robot is can be very important! The RedBot Wheel Encoder allows you to track the number of revolutions each wheel has made. This sensor works by detecting the movement of small teeth connected to a motor through the reflection of infrared light. By measuring the amount of refle...
SparkFun Transceiver Breakout - RS-485
This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount o...
SparkFun RedBot Sensor - Accelerometer
The SparkFun RedBot Accelerometer is an add-on sensor that provides bump and motion detection for the RedBot platform. It measures acceleration forces on the X, Y, and Z axes using the MMA8452Q triple-axis accelerometer, giving your robot awareness of its movements and orientation. The sensor co...
SparkFun LED Driver Breakout - LP55231
The SparkFun LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. Remarkably simple, the breakout is equipped primarily with just the LP55231 LED controller IC, plus three RGB LEDs. It also features pads and jumpers for replaci...
SparkFun Digi XBee® Explorer Regulated
·
The SparkFun Digi XBee Explorer Regulated is a breakout board for Digi's XBee 3 micro form factor modules. It provides regulated power (up to 6V input), a Qwiic connector for I2C sensors, and reset/D0 buttons — everything you need to get an XBee module up and running without a USB connection. Co...
SparkFun Qwiic OLED - (1.3in., 128x64)
·
The SparkFun Qwiic 1.3in OLED is a compact, easy-to-use display perfect for adding a visual element to your Arduino, Raspberry Pi, or other microcontroller projects. With a vibrant 1.3-inch OLED screen and a resolution of 128x64 pixels that deliver crisp white-on-black, it's ideal for displaying ...
SparkFun Qwiic Shield for Arduino Nano
The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND, 3.3V, SDA and SCL) on your Arduino Nano to four SparkFun Qwiic connectors (two horizontally and two ...
SparkFun MicroMod mikroBUS Starter Kit
The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikroBUS™ Carrier Board and the SparkFun MicroMod STM32 Processor but you will also r...
SparkFun RedBot Sensor - Line Follower
The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared light, it can detect transitions from light t...
SparkFun Ardumoto - Motor Driver Shield
The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. The board draws power from the Arduino's Vin line and includes blue and yellow L...
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constellations simultaneously for faster lock times and improved precision. An onboard r...
SparkFun Pro RF - LoRa, 915MHz (SAMD21)
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission in the 915MHz ISM band with LoRa Capabilities, the Pro RF is a great choice for...
SparkFun Haptic Motor Driver - DRV2605L
The SparkFun Haptic Motor Driver breakout board features the Texas Instruments DRV2605L, providing an easy way to add tactile feedback to your projects. Connect a vibration motor, communicate over I2C from any Arduino-compatible microcontroller, and trigger a library of haptic effects. The DRV26...
SparkFun Serial Controlled Motor Driver
The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop to full sp...
