All Products

SKU: SF-COM-18076

The GD25Q40C is a 4 Mbit (512 KB) serial flash memory chip supporting standard, dual, and quad SPI interfaces. With clock speeds up to 120 MHz and quad I/O transfer rates reaching 480 Mbits/s, it provides fast non-volatile storage for embedded systems and microcontroller projects. Featuring 100,...

SKU: SF-PRT-30977 · MPN: PRT-30977

This cover is a dedicated mounting accessory for compatible Akasa fanless Raspberry Pi enclosures. It replaces or supplements the standard enclosure panel so the case can be attached to the back of a display or another VESA-compatible surface.Mounting the Raspberry Pi behind a monitor helps creat...

SKU: SF-PRT-17912

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces o...

SKU: SF-COM-13399 · MPN: COM-13399

Add a clean, heavy-duty control to your enclosure or custom panel with this 16mm metal momentary pushbutton. The stainless steel body gives it a rugged, professional feel, while the blue illuminated LED ring provides a clear visual indicator or makes the button easier to find in low light.This is...

SKU: SF-TOL-29533 · MPN: TOL-29533

This desoldering wick is a pre-fluxed copper braid for removing solder from joints, fixing excess solder, and cleaning up solder bridges. It is a handy bench consumable for rework, repairs, and swapping components on PCBs.To use it, place the braid over the solder joint and apply your soldering i...

SKU: SF-TOL-18471 · MPN: TOL-18471

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them out in a grid pattern to turn a wasteboard into a threaded table. Installation ...

SKU: SF-COM-18276 · MPN: COM-18276

This is a 715 Ohms SMD resistor with 1/10W power rating and ±1% tolerance, suitable for compact electronics builds, repairs and prototyping.It uses a thick film composition and has two terminations for standard surface-mount assembly. The part is supplied as a single resistor.Features:Moisture Re...

SKU: SF-COM-28380 · MPN: COM-28380

Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...

SKU: SF-GPS-22693 · MPN: GPS-22693

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data and GNSS measurements to provide accurate and continuous positioning...

SKU: SF-WRL-19032 · MPN: WRL-19032

This Holybro SiK Telemetry Radio kit is a compact, lightweight open-source radio link for sending serial data over more than 300m out of the box. It is designed as a simple cable replacement for telemetry, RTK correction data (RTCM), MAVLink traffic, or basic serial output such as Serial.print() ...

SKU: SF-CAB-10177

You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other. Documents: Datasheet

SKU: SF-DEV-14596

If you already have or are looking to own some Circuit Stickers from Chibitronics you may be looking to add a few effects to your LEDs. The LED Effects Add-On Pack provides you with four unique stickers to make your LEDs blink, twinkle, and generally effect the way you experience them. Each kit f...

SKU: SF-CAB-18081

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse cond...

SKU: SF-TOL-19768 · MPN: TOL-19768

These V-bit cutters are made for engraving intricate patterns and fine details, especially where a sharp 90° V profile is useful. They work well with the V-carve feature in Carbide Create for sign making, decorative engraving and detailed CNC work.Each pack includes two cutters. The bits use an H...

SKU: SF-CAB-24060 · MPN: CAB-24060

A 3-metre USB-C to USB-C power charging cable with a flexible, tangle-free silicone coating. The generous length provides plenty of reach for powering development boards, single-board computers, and other USB-C devices without needing to be right next to the power source. The silicone jacket is ...

SKU: SF-CAB-18080

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse con...

SKU: SF-WRL-22329 · MPN: WRL-22329

The Digi XBee 3 Global Cellular module is a compact, low-power module designed for rapid integration of cellular IoT capabilities. It combines LTE-M, NB-IoT, and 2G connectivity with Bluetooth Low Energy (BLE) and GNSS positioning in the familiar XBee 20-pin through-hole form factor. Optimised f...

SKU: SF-ROB-30118 · MPN: ROB-30118

Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...

SKU: SF-PRT-27313 · MPN: PRT-27313

This wiper/plunger is Spectra Symbol's recommended actuator for use with linear and rotary SoftPots, ThinPots and especially HotPots.It provides a controlled contact force for actuating compatible potentiometer sensors. While these sensors can operate with multiple contact methods, this wiper/plu...

SKU: SF-DEV-09713

The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and ru...