All Products
AI Overview
Popular DFRobot picks (by project type)
- Power / off-grid: DFRobot Solar Power Manager Kit with 9V Panel (9V panel, compact solar power management) — $115.05.
Industrial / outdoor sensing (RS485 / IP-rated)
- Weather station (all-in-one): DFRobot Ultrasonic 7-in-1 RS485 Weather Sensor (7-in-1, RS485) — $612.20.
- Water turbidity: DFRobot SEN0710 RS485 Industrial Turbidity Sensor (0-1000 NTU) (0–1000 NTU, RS485) — $563.00.
- Water conductivity (EC): DFRobot RS485 Industrial Water EC Sensor K=1 (K=1, pre-calibrated, RS485) — $366.35.
- Water pH: DFRobot RS485 Modbus IP68 Water Quality pH Sensor (IP68, Modbus-RTU/RS485) — $317.15.
- Water ORP: DFRobot Industrial RS485 ORP Sensor - IP68 ModBus-RTU (IP68, Modbus-RTU/RS485) — $440.10.
- Ultrasonic ranging (IP67): DFRobot SEN0627 Small-Angle Ultrasonic Ranging Sensor 8m IP67 (25–800 cm, IP67, 15° FOV) — $291.05.
- Non-contact liquid level (radar): DFRobot SEN0676 80GHz mmWave Liquid Level Sensor - 40m UART (80GHz FMCW, up to 40 m, UART) — $145.05.
Wireless / IoT
- Private LoRaWAN gateway (EU868): DFRobot LoRaWAN Gateway with SIoT & Node-RED - EU868 (EU868, SX1302 8-channel, local server + Node-RED) — $366.35.
- BLE sensor broadcasting (5-pack): DFRobot Fermion BLE Sensor Beacon Pack - 5 Pack (turn 3.3V sensors into BLE nodes) — $41.55.
Robotics / UI / modules & accessories
- IMU + barometer: DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280) (BNO055 orientation + BMP280 pressure/temp) — $63.65.
- ESP32 touchscreen: DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32 (3.5" IPS, 480×320, capacitive touch) — $73.50.
- Wiring (Gravity → DuPont): DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack (30 cm, tagged signal labels, 5-pack) — $16.00.
- Lighting: DFRobot FIT0840 5V Flexible LED Strip, Purple - 60 LEDs/m (5V, 60 LEDs/m, ultra-thin) — $14.50.
Edge AI / vision
- Offline face/palm/QR recognition: DFRobot SEN0677 Offline AI 3D Vision Recognition Sensor (on-device AI, face + palm vein + QR decode) — $120.45.
Collections
Showing 581-600 of 1919 products
Aluminum Alloy Case for LattePanda
A CNC-machined aluminium alloy enclosure designed for the LattePanda single board computer (2G/32GB and 4G/64GB models). Features anodic oxidation surface treatment for a durable, professional finish with reserved openings for a touch panel, display, and cooling fan. The internal cavity accommod...
KnowFlow Basic Water Monitoring Kit
·
Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...
Arduino Quad DC Motor Driver Shield
INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG ...
Water-proof Ultrasonic Sensor (ULA)
This is an ultrasonic distance sensor(ULS) of high performance with an enclosed waterproof probe. The sensor, like many other ultrasonic sensors, based on the principle of ultrasonic echo ranging, determines the distance to a target by measuring time lapses between the sending of a pulse and rece...
Digital RGB LED Strip 120 LED-White
This 2-metre WS2812 addressable RGB LED strip features 120 individually controllable LEDs on a flexible white PCB. Each LED supports 256 brightness levels per colour channel (16.7 million colours) and is driven by a single data line, making it easy to create dynamic lighting effects with any micr...
Water-proof Ultrasonic Sensor (ULS)
A high-performance waterproof ultrasonic distance sensor with an enclosed probe, capable of measuring distances from 270 mm to 8000 mm. Based on ultrasonic echo ranging, it determines distance by measuring the time between sending a pulse and receiving the echo — no physical contact required. Su...
Digital RGB LED Strip 120 LED-Black
A 2-metre addressable RGB LED strip using WS2812 LEDs on a black flexible PCB. Each of the 120 LEDs is individually controllable via a single data line, supporting 24-bit colour (16.7 million colours) with 256 brightness levels per channel. The strip is flexible enough to bend around curves and ...
FireBeetle Covers-LoRa Radio 868MHz
The FireBeetle LoRa Radio 868 MHz is a wireless transmission cover board for the DFRobot FireBeetle series, featuring the Semtech SX1276 LoRa transceiver with a built-in power amplifier. It supports LoRa long-range modulation as well as FSK, GFSK, and OOK modes, with a transmission range of up to...
Gravity:Digital Self-Locking Switch
INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and is compatible with the "gravity" 3-pin interface making it easy to connect to a...
Bluetooth 2.0 Module V3 For Arduino
A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable baud rate from 4800 to 1,382,400 bps. Compatible with most Bluetooth adapters, lap...
5V COB LED Strip Light - Warm White
·
This compact COB LED strip uses 16 LEDs under a silicone encapsulated surface, helping protect the chips while providing a smooth, even warm white light output.It runs from DC 5V, making it suitable for battery-operated lighting projects and other low-voltage builds. The strip is solderable and c...
Ethernet Shield for Arduino - W5200
An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional shields on top. An aluminium alloy heatsink is fitted to the W5200 chip for therma...
FireBeetle Covers-LoRa Radio 433MHz
DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main...
FireBeetle Covers-LoRa Radio 915MHz
DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main...
UNIHIKER K10 Plastic Protector Case
·
This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is made from high-toughness plastic, giving the board extra protection against scrat...
Vibration Sensor Module for Arduino
A digital vibration sensor module that detects vibration using an internal inductance coil. When vibration is detected, the module outputs a LOW signal and its on-board LED indicator lights up. Sensitivity is adjustable via a built-in potentiometer, and the wide 5–15 V power supply range makes it...
DC-DC Buck Converter 7-24V to 5V 4A
INTRODUCTIONThis is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports make it suitable for connecting multiple devices like, large current servos, programmable LED strip, etc.The module integrates durable cer...
Arduino Zero to Hero Kit(Pre-order)
The Arduino Zero to Hero Kit is an open-source electronics learning toolkit that comes with a comprehensive online course created by Australian robotics engineer and teacher Sanjin Dedić. Designed for ambitious beginners and intermediate Arduino users, the course takes you from basic circuitry th...
M1 AI+lOT Module K210 Deep learning
AI chip normally refers to ASIC chip that aims at AI algorithms. Although the conventional CPU and GPU can be used to execute AI algorithms, they have been greatly limited in their speed, performance, and practicality. Compared with traditional processor chip, AI chip offers faster speed, more co...
18° Micro Stepper Motor for Arduino
A compact 10 mm micro stepper motor with 18° per step, designed for direct connection to microcontrollers like Arduino and ESP32 without requiring a dedicated driver board. The 2-phase 4-wire bipolar configuration makes it straightforward to integrate into small-scale automation projects. The mo...
