DFRobot
Bluetooth 2.0 Module V3 For Arduino
A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent seri...
Get notified when back in stock
A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable baud rate from 4800 to 1,382,400 bps.
Compatible with most Bluetooth adapters, laptops, and Android phones. Two modules can be paired together for a wireless serial bridge, making it easy to replace wired serial connections in your projects.
Key Features
- Bluetooth 2.0 + EDR – Up to 2.1 Mbps asynchronous transfer
- CSR BC417143 Chip – Class 2, ≤4 dBm transmit power
- 20–30 m Range – Free-space transmission distance
- Wide Voltage Input – 3.5–8 V DC or 3.3 V DC (50 mA)
- Configurable Baud Rate – 4800–1,382,400 bps (default 9600)
- AT Command Mode – Configure via DIP switch for baud rate and master/slave settings
- Status LEDs – STATE (searching/connected) and LINK (paired) indicators
- On-Board Antenna – No external antenna required
- Operating Temperature – −20°C to +55°C
- Dimensions – 40 × 20 × 13 mm
Ideal For
- Wireless serial communication with Arduino projects
- Replacing wired serial connections between devices
- Remote control and data logging applications
- Bluetooth-enabled robotics and IoT prototypes
Package Contents
- 1× DFRobot Bluetooth V3 Module
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- baud
- Baud is the signalling rate of a serial connection, often used as the speed setting for UART communication. Matching the baud rate matters because both connected devices must use the same setting for readable data.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- DIP switch
- A DIP switch is a small set of physical on/off switches used to configure hardware settings without software. It matters because changing features such as auto power-on or charging limits may require moving these tiny switches correctly.
- IoT
- Short for Internet of Things, meaning physical devices that connect to networks or the internet to send data or be controlled remotely. It matters if you want projects such as connected sensors, remote controls or classroom data-logging activities.
Find this product in
Connectivity
Supplier page — dfrobot.com
Supplier Description · 668.1 KB · Click any page to view full size
TEL0026 bluetooth module datasheet V1.0
Datasheet · 682.1 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
