Sensors & Input

SKU: PR-PIM635 | Brand: Little Bird

The Pico Enviro+ Pack is a compact environmental monitoring add-on for the Raspberry Pi Pico and Pico W. Measuring just 61.5 × 31.5 mm, it packs a weather and gas sensor, light sensor, microphone, a 1.54" colour LCD, ...

SKU: SF-SEN-13905 | Brand: SparkFun

The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature in a compact package. This version comes with headers pre-soldered for easy breadboard use or direct wir...

SKU: EC-CCF32323S | Brand: Elecrow

The ESP32S is a WiFi and Bluetooth combo module built around the Espressif ESP32 dual-core processor. It supports 802.11 b/g/n WiFi with speeds up to 150 Mbps and Bluetooth v4.2 (both Classic and BLE), making it a ver...

SKU: M5-K027 | Brand: Little Bird

Description Note: M5StickV does not support for microphone function, which will be added on upcoming Wifi version M5StickV+. M5Stack recently launched the new AIOT(AI+IOT) Camera powered by Kendryte K210 -an edge c...

SKU: AF-3387 | Brand: Adafruit

Add motion, direction and orientation sensing to your project with this all-in-one 9-DOF sensor from Adafruit. The LSM9DS1 from ST Micro combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope into a...

SKU: EF-EF03081 | Brand: ElecFreaks

The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and...

SKU: SF-SEN-13676 | Brand: SparkFun

The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, humidity, and temperature in a compact package. Whether you're building a weather station, home automation system, or indoor air quality mo...

SKU: AF-789 | Brand: Adafruit

The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phon...

SKU: AF-6355 | Brand: Adafruit

The Adafruit PiCowbell Adalogger is a data logging add-on board designed to socket underneath a Raspberry Pi Pico or Pico W. It provides a microSD card slot, a PCF8523 real-time clock with battery backup, and a STEMMA...

SKU: AF-5980 | Brand: Adafruit

The Feather RP2040 Adalogger combines the RP2040 dual-core processor with a MicroSD card holder for data logging and file storage. It features 8 MB SPI flash, 264 KB SRAM, USB Type C, STEMMA QT connector, and built-in...

SKU: AF-5671 | Brand: Adafruit

ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption,...

SKU: PR-PIM221 | Brand: Little Bird

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi. With a relay, analog channels, powered outputs, and buffered inputs — all 24V tolerant — you can connect a wide range of sen...

SKU: SF-KIT-18292 | Brand: SparkFun

The SparkFun GPS-RTK-SMA Kit provides everything you need to get started with centimetre-level GPS accuracy using the u-blox ZED-F9P module. Capable of 10mm three-dimensional positioning accuracy with RTK corrections,...

SKU: DF-DFR0963 | Brand: DFRobot

This is an embedded serial-to-Ethernet module based on the ESP32 series, also can be called a gateway. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the net...

SKU: AF-4919 | Brand: Adafruit

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...

SKU: AF-4634 | Brand: Adafruit

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis ...

SKU: M5-K002 | Brand: Little Bird

Description M5Stack GRAY Kit is from one of the M5Stack development kit series, it’s a upgrade from the Basic kits. In comparison, Gray kit provide a extra IMU sensor, MPU6886+BMM150. With a IMU posture sensor...

SKU: PI-ESP004 | Brand: Pimoroni

This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...

SKU: SF-SEN-14480 | Brand: SparkFun

The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for ...

SKU: AF-2795 | Brand: Adafruit

The Feather 32u4 Adalogger is an all-in-one datalogger built around the ATmega32u4, with a built-in MicroSD card holder, USB connectivity, and LiPo battery charging. Ready to log data straight out of the box — just ad...