All Products
AI Overview
Here are solid motor driver options, grouped by motor type and platform.
Brushed DC motor drivers (H-bridge)
- DRV8838 Single Brushed DC Motor Driver Carrier (single DC motor, compact carrier) ($6.40)
- Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max (single DC motor, 6.5–45V motor supply, up to 3.6A peak) ($15.80)
- 2x7A DC Motor Driver (dual DC motors, 7A continuous/ch with high peak capability) ($35.15)
- 15A Single DC Motor Driver (single DC motor, 12–36V, up to 15A with heatsink) ($32.95)
- Thumbnail Sized DC Motor Driver 2x1.5A (HR8833) (dual DC motors, up to 1.5A/ch, very small form factor) ($7.90)
- 2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG) (dual DC motors, 1.2A/ch with easy Gravity cabling) ($13.90)
- Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board (dual DC or 1 stepper, up to 1.2A/ch) ($12.50)
- L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh (2.5–12V, up to 800mA/ch, breadboard-friendly DIP) ($3.25)
- L298N Dual H-Bridge Motor Driver Board (dual DC or 1 stepper, classic L298N module with screw terminals) ($15.45)
Stepper motor drivers (STEP/DIR microstepping)
- A4988 Stepper Motor Driver Carrier (Pololu-style, up to about 2A/coil with cooling, common for CNC/3D printers) ($10.05)
- A4988 Stepper Motor Driver Carrier, Black Edition (better thermals, ~20% more current than standard A4988 carrier) ($33.05)
- DRV8834 Low-Voltage Stepper Motor Driver Carrier (low-voltage stepper option; A4988-compatible form factor) ($10.85)
- Adafruit TMC2209 Stepper Motor Driver Breakout Board (quiet/smooth “StealthChop” style driver for steppers) ($18.10)
- Adafruit STSPIN220 Stepper Motor Driver Breakout Board (GPIO STEP/DIR, defaults to 1/16 microstepping) ($11.65)
- TB6600 arduino Stepper Motor Driver (higher-voltage stepper driver, 9–42V, 5V pulse inputs) ($30.15)
- EasyDriver - Stepper Motor Driver (simple step/direction driver for small-to-medium steppers) ($37.45)
- Big Easy Driver (up to 2A/phase, A4988-based, robust dev board) ($43.50)
- SparkFun Mini Stepper Motor Driver - TC78H670FTG (compact, breadboard-friendly stepper driver) ($26.30)
- Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) (Arduino shield, dual stepper setup using DRV8825) ($54.78)
Raspberry Pi / Arduino “multi-motor” controller boards
- Motoron M3H256 Triple Motor Controller for Raspberry Pi (No Connectors or Standoffs) (Raspberry Pi, I²C, controls up to 3 brushed DC motors) ($70.85)
- Motoron M3H256 Triple Motor Controller for Raspberry Pi (Connectors Soldered) (same 3-motor I²C control with connectors pre-soldered) ($87.20)
- Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered) (Arduino shield, I²C, up to 3 DC motors) ($87.20)
- Motor 2040 - Quad Motor Controller (4 channels with encoder support, RP2040-based standalone controller) ($53.35)
- DC Motor Driver HAT(V1.0) (Raspberry Pi HAT, I²C, TB6612FNG-based, up to 2 DC motors) ($26.00)
Brushless DC (BLDC) / FOC
- SimpleFOCmini Brushless DC Motor Driver Board (compact FOC-capable BLDC driver for smooth control) ($14.50)
What type of motor are you driving?
What controller/platform are you using?
Collections
Showing 21-39 of 39 products · 21 unavailable products hidden
![Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCxwVJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--be53511e4bffcc386d14cc91e4d5fa7bc52d1658/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_cffee67c-857a-46f6-8d7e-71857a2f29bb.jpg)
Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]
·
The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta...
Four - Channels Motor Shield For Arduino
This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...
Metal DC Geared Motor - 6V 133RPM 4.5kg.cm
This metal DC geared motor features a 45:1 metal gear reducer in a compact form factor, delivering up to 4.5 kg·cm of stall torque at 133 RPM. The all-metal gearbox provides durability and reliability for robotics, drive systems, and mechanical projects. The motor operates on 2–7.5 V (rated 6 V)...
Heatsink Compound
A 5g syringe of white thermal compound (also known as thermal grease or thermal paste) for improving heat transfer between components and heatsinks. Essential for any project where heat dissipation is critical. Composed of 50% silicone, 20% carbon, and 30% metal oxide with a thermal conductivity...
Arduino CNC Shield V3.51 - GRBL v0.9 compatible - Uses Pololu Drivers
The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper motors for CNC routers, laser cutters, 3D printers, and other precision motion pro...
Zumo Shield for Arduino, v1.2
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into the shield, face down. This shield includes dual motor drivers, a buzzer for pl...
N20 DC Motor with Magnetic Encoder - 6V with 1:100 Gear Ratio
·
The first step in a robotics project is to get a motor spinning. Once you've done that you quickly learn that not all motors go the same speed, even if they are the same part number! There are always variations that relate to voltage, environment, and manufacturing changes. So, the second step is...
Arduino Motor Shield R3
INTRODUCTION The Arduino Motor Shield is based on L298 (a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors). It helps you drive two DC motors with Arduino board as well as control the speed and direction of the ...
Metal DC Geared Motor w/Encoder - 12V 83RPM 45Kg.cm
This 12 V DC geared motor (model GB37Y3530-12V-83R) pairs a powerful brushed motor with a 131:1 metal gearbox and an integrated Hall-effect quadrature encoder. The encoder provides 16 counts per revolution on the motor shaft — equivalent to 2096 counts per revolution on the gearbox output — givin...
Pololu Simple High-Power Motor Controller 24v23
Overview The Pololu Simple Motor Controllers are versatile, general-purpose motor controllers for brushed, DC motors. A wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control appli...
Brushless DC Motor with Encoder 12V 159RPM
INTRODUCTION This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor t...
120:1 Plastic Gearmotor, 90º Output
A 120:1 plastic gearmotor with a 90° output shaft — the output is perpendicular to the motor axis, making it a compact choice for small robot designs where side-mounted wheels or mechanisms are needed. The enclosed gearbox and low-current brushed DC motor run on 3–12V, with a built-in safety clut...
Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size
·
A compact NEMA-8 bipolar stepper motor with the same 1.8° step angle (200 steps/revolution) as full-size NEMA-17 motors, but in a much smaller 20 × 30 mm package. Ideal for compact CNC builds, small robotics, and space-constrained motion control projects. This 4-wire bipolar stepper is rated for...
200:1 Plastic Gearmotor, 90º Output
A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...
Metal DC Geared Motor w/Encoder - 6V 210RPM 10Kg.cm
This is a metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft. Pinmap ...
Metal DC Geared Motor w/Encoder - 6V 100RPM 6.5Kg.cm
This is a metal geared DC motor w/Encoder. It is a 6V motor with a 75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 823.1 counts per revolution of the gearbox’s output shaft. Pinmap These ...
120:1 Mini Plastic Gearmotor, Offset 3mm D-Shaft Output
A compact, inexpensive brushed DC motor with a 120:1 plastic reduction gearbox, well suited for small robot builds. The motor is rated for 4.5V but runs comfortably in the 3–6V range. The gearbox output shaft is a 3mm D-shape, offset from and parallel to the motor shaft. A built-in safety clutch ...
Adafruit CAN Bus FeatherWing - MCP2515
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
