All Products
AI Overview
“Little bird board” is a broad match in the catalogue—these are the most relevant Little Bird branded boards by use-case:
Microcontroller / programmable boards
- Uno R3 - Little Bird ($19.55) — Arduino Uno R3 compatible development board (shield-compatible layout).
- Little Bird Finch Board ATTiny85 ($7.80) — ATtiny85 tiny programmable board aimed at e-textiles / wearables.
- Little Bird Finch Board ATTiny85 x 5 ($36.05) — 5-pack of the Finch boards for classes/workshops.
- EagLED - Little Bird E-Textile Snapable Board ($27.20) — Arduino-compatible wearable board with LEDs, light sensor, push button, and battery holder.
- EagLED - Little Bird E-Textile Snippable Board with Buzzer ($34.35) — similar wearable board but snippable and includes a buzzer.
LED “boards” (add addressable RGB lighting)
- Little Bird Lorikeet WS2812B Rainbow Board ($2.00) — 5× WS2812B (NeoPixel-compatible) addressable LEDs.
- Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header ($3.50) — Lorikeet version with a right-angle header.
- Little Bird Macaw WS2812B Rainbow Board 3 LED ($1.30) — compact 3× WS2812B addressable LED board.
- Little Bird Toucan 8 x APA102 RGB LED ($11.65) — Raspberry Pi add-on with 8× APA102 smart LEDs.
Breakout / interface boards
- Little Bird Breakout Nest for Raspberry Pi ($26.35) — Raspberry Pi GPIO breakout for easier external wiring.
- Little Bird Breakout Board for XBee Module ($0.65) — simple XBee pin breakout to 0.1" headers.
Specialty input board
- ShakeUp Board Only ($38.60) — USB board that appears as a keyboard/mouse and lets you trigger inputs using alligator clips.
Which type of “Little Bird board” are you after?
Collections
Showing 841-860 of 1715 products
3.7V 18650 Lithium Battery Tip Head - 2600mAh 2pack
Power your projects reliably with this 3.7V 18650 Lithium Battery 2-pack, featuring a convenient tip head design for easy integration into battery holders and devices. With a 2600mAh capacity, these cells are ideal for portable electronics, DIY builds, and power applications requiring stable, rec...
12mm Momentary Push Button Dome with Wires - Yellow
A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentar...
Cockatoo - Micro:bit simple screw-terminal breakout
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or crocodile clips required. Screw terminals provide reliable, secure connections for ...
Motion Activated Audio Player with Two Separate PIR
This motion-activated MP3 player is designed to play audio automatically when movement is detected by PIR sensors. The sensors are separate from the player, so they can be positioned where they are most useful while the audio electronics stay mounted nearby.This dual-PIR version connects external...
Mini Wireless Home Theatre Keyboard for Raspberry Pi
This compact 2.4GHz wireless keyboard with built-in trackball mouse is designed for Raspberry Pi media centres and mini-computer setups. The slim chiclet-style keyboard features a full QWERTY layout, while the integrated trackball provides mouse control with two buttons and a scroll wheel — all t...
Aluminum 7 in 1 USB C Hub with USB 3.0 USB 2.0 Ports
A compact aluminium USB-C hub that expands a single USB-C port into seven outputs — including USB 3.0, USB 2.0, and USB-C ports. Plug-and-play with no drivers required, it's a convenient way to add extra connectivity to laptops, desktops, and tablets. Key Features 7-in-1 Expansion – 1× USB 3.0...
14500 Rechargeable Li-Ion Battery 800mAh 3.7V Nipple
A 14500-size rechargeable lithium-ion battery with 800mAh capacity and 3.7V nominal voltage. The 14500 form factor is the same size as a standard AA battery, making it a common choice for LED torches and other compact devices that accept this cell type. This cell has a nipple (button-top) positiv...
Raspberry Pi 4 4GB with 32G SD card and HDMI adapter
Faster than ever, the new Raspberry Pi 4 Model B is now equipped with the latest Broadcom System on a Chip that provides true Desktop Level Performance. With the ultrapowerful quad-core Broadcom System on a Chip, the Raspberry Pi 4 Model B has more muscle when you’re using processor-intensive ...
5M Flexible el wire with battery holder 5mm - Yellow
This 5-metre length of EL wire (electroluminescent wire) glows a vibrant yellow when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and w...
SIM868 GSM GPRS GNSS Bluetooth 3.0 HAT for Raspberry
Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero WSupports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioningBluetooth 3.0, supports data transferring through BluetoothOnboard USB TO UART...
10M Ohm 0.25 Watt Carbon Film Resistors - Pack of 10
A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and leakage current sensing circuits. Key Features 10MΩ, 1% Tolerance – Very high r...
5M Flexible el wire with battery holder 5mm - Orange
This 5-metre length of EL wire (electroluminescent wire) glows a vibrant orange when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and w...
12V GA25-370 DC Gear motor with Speed Encode 280 RMP
The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. Running at 280 RPM, it provides a good balance of speed and torque for small robotics and automation projects. Key Features Built-In Speed Encoder – Real-time speed feedback for P...
5M Flexible el wire with battery holder 5mm - Purple
This 5-metre length of EL wire (electroluminescent wire) glows a vibrant purple when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and w...
Smart Obstacle Avoidance Robotics Kit for Arduino v2
This cost-effective kit is an essential tool in exploring the everyday functions of robotics, specifically obstacle avoidance. By constructing, connecting, and coding their own autonomous vehicle, beginners and children can gain a deeper understanding and appreciation for the role of robots in ou...
E-Textiles LilyPad Compatible USB - ATmega32U4 Board
A LilyPad-compatible microcontroller board based on the ATmega32U4, designed for e-textile and wearable electronics projects. The built-in USB communication allows the board to appear as a mouse, keyboard, or virtual serial port when connected to a computer — no separate USB-to-serial adapter nee...
Type-C male to female Power Switch for Raspberry Pi 4
NOTE: These devices are not recommended for the PI5 which uses USB-C PD to supply more power than a PI4This device is perfect for turning on and off power to your Raspberry Pi 4 or other single board computer powered by USB-C. You can use your existing power adapters and cables provided that the...
IR Remote Control for use with Maqueen and Owl Robots
Introducing the perfect addition to your robotics classroom - the IR Remote Control for use with Maqueen and Owl Robots! This user-friendly remote is powered by 2 AA batteries and features numbers 0-9 and direction buttons, making it compatible with all of our IR robots and modules.Effortlessly c...
HDMI Male To VGA Female Adapter Video Converter Cable
This HDMI-to-VGA adapter cable converts a digital HDMI signal to analogue VGA output, letting you connect HDMI devices like a Raspberry Pi, laptop, or media player to a VGA monitor, projector, or LCD screen. It features a built-in conversion chipset and requires no external power — it draws power...
Pimoroni Pin Party Enamel Pin Badge - Component Pizza
Level up your lapel with our Pimoroni Pin Party enamel pin badges! These soft enamel pin badges will bring a touch of geek chic to your jacket, bag, or hat (the sort you wear on your head!), and come in four different fun designs. The rubber backs will hold your pins securely on...
