EagLED - Little Bird E-Textile Snippable Board with Buzzer
We have ✅ 220 available of the LB-EAGLED-BUZZ in our Sydney warehouse. An extra 50 units will be available shortly.
EagLED is Little Bird Electronics' wearable development kit. It's a complete Arduino compatible microcontroller that has LEDs, Light Sensor, Push Button and Buzzer built into a snippable board.
USB Support
The EagLED has built-in USB support that user can use to program and power up the board. It's fully compatible with Arduino IDE and also a Microsoft Certified device.
With the built-in USB support, user can write sketch that make EagLED act like a mouse, keyboard and also MIDI musical equipment when connected to the computer.
Power Supply
EagLED is designed to be powered by multiple power supplies everything from a 6V coin cell to USB.
It has an onboard 3.3V 600mA CMOS LDO REGULATOR protected by a diode plus and IDEAL diode. The USB supply is also protected by a USB fuse. When powered by a CR2032 coin cell battery, the EagLED is be able to run up to 10 hours with the default factory blinking sketch.
Beginner Friendly
All the components on the board are flush to the PCB and won't snag to the garments and unlike other products, connecting a battery the wong way won't fry board!
There are 4 indicator LEDs on each EagLED which indicate, power, TX, RX and an additional user controlled LED.
Each EagLED has an onboard ICSP connector for reprogramming by advanced users and 14 sewing tap pads for attachment and electrical connections. These sewing pads are also crocodile clip friendly.
Beyond the main board, each EagLED also comes with 2 Eye LEDs, 2 star LEDs, 2 love heart LEDs, a push button and a light sensor that are all detachable for sewing at different places of a garment.
The EagLED has a detachable coin cell holder with a built-in on/off switch.
The EagLED - Little Bird E-Textile Snippable Board with Buzzer appears in the following collections:
SKU LB-EAGLED-BUZZ
by Little Bird
