All Products
Showing 41-60 of 82 products · 18 unavailable products hidden
SMA Male to BNC Male Cable - 1 m (RG316)
·
This 1 metre RF coaxial cable adapts an SMA male connection to a BNC male connection, making it handy for test gear, antennas, RF modules and lab setups that use mixed connector types.It uses RG316-style coax shielding, which is suited to applications that need stable performance in higher-temper...
Espressif Module Prog-1 ESP32 WROOM Programmer
·
The Espressif Module Prog-1 is a dedicated programmer for flashing ESP32 modules without soldering. It uses spring pins to make a secure, swappable connection to supported modules, making it handy for development, testing or small production runs.To use it, place a compatible ESP32 module onto th...
SparkPNT GNSS Flex Module - mosaic-X5 & IM19 IMU
·
This GNSS Flex module combines a Septentrio mosaic-X5 multi-band RTK receiver with a Feyman IM19 IMU for high-precision positioning, tilt compensation and dead reckoning. It is aimed at professional surveying, industrial robotics and autonomous navigation applications where reliable position and ...
SparkPNT GNSS Flex Module - ZED-X20P & IM19 IMU
·
This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation and surveying projects.It is designed for the SparkPNT GNSS Flex ecosystem, with...
DFRobot Solar Power Manager Kit with 9V Panel
·
Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...
PH2.0-4P Female-to-Female Jumper Cable 5cm - 10 Pack
·
This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...
PH2.0 3-Pin Male-to-Male Cable 10cm - 10 Pack
·
This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, peripherals and expansion modules without soldering.Each cable has keyed PH2.0 3-p...
LattePanda Mu A380 MXM GPU Carrier Board Kit
·
Build a compact LattePanda Mu-based x86 edge system with discrete MXM graphics and multi-display output. This carrier board kit is designed to bridge the gap between low-power SBCs and larger industrial PCIe expansion systems, making it suitable for edge AI, signage and visual computing projects....
DFRobot GDI-Line 18-Pin Reverse FPC Cable 20cm - 5 Pack
·
This 20cm 18-pin FPC flat flex ribbon cable is made for connecting compatible display modules and controller boards that use the GDI interface. Its reverse 18-pin layout and 0.5mm pitch suit compact display projects where tidy, low-profile internal wiring is needed.The flexible polyimide-based ri...
DFRobot GDI-Line-30CM 18-Pin Reverse FPC Cable - 5 Pack
·
This 30 cm flat flex ribbon cable is made for connecting compatible GDI display modules to controller boards. It uses an 18-pin reverse FPC layout with a 0.5 mm pitch, helping keep display wiring neat in compact electronics builds.The flexible polyimide construction is designed to handle tight ro...
GDI 18-Pin Reverse FPC Ribbon Cable 5cm - Pack of 5
·
This 5cm 18-pin FPC flat flex ribbon cable is made for connecting compatible controller boards to GDI-enabled display modules. Its short length is suited to compact builds where you want a neat internal display connection with minimal cable clutter.The 0.5mm pitch helps align with standard 18-pin...
DFRobot SEN0659 Industrial RS485 NDIR CO2 Sensor - 400-5000ppm
·
This industrial CO2 probe is built for reliable carbon dioxide monitoring in environments such as indoor air quality systems, pipelines, greenhouses and fresh air systems. It uses NDIR sensing to measure CO2 from 400 to 5000 PPM and supports manual calibration for dependable readings.The IP65-rat...
DFRobot 5V COB LED Strip Light - Yellow
·
This compact COB light strip is a bright yellow 5V lighting module for decorative and embedded illumination projects. It uses 16 LED chips under silicone encapsulation to create a smooth, continuous luminous surface with minimal hotspots and shadowing.The low-voltage DC 5V input makes it practica...
Raspberry Pi CM4 IoT Router Carrier Board Mini Kit (EU PSU)
·
Turn a Raspberry Pi Compute Module 4 into a compact dual-Gigabit router, gateway or IoT platform with this mini carrier board kit from DFRobot. The board connects a Gigabit network card over PCIe, giving the CM4 two full-speed Gigabit Ethernet ports with lower CPU usage and improved long-running ...
Raspberry Pi CM4 IoT Router Carrier Board Mini Kit - US Plug
·
This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around the Raspberry Pi Compute Module 4 series for building small, capable network appl...
Raspberry Pi CM4 IoT Router Carrier Board Mini with Metal Case
·
This pack combines a Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, giving you a compact platform for building a Raspberry Pi CM4-based router, gateway or IoT hub.The carrier board adds two full-speed gigabit network ports by using PCIe for the second netw...
Raspberry Pi CM4 IoT Router Carrier Kit with Case & PiTray Mini
·
This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using the CM4 built-in Ethernet interface and a PCI Express 1000BASE-T NIC, offering a...
Timing GNSS Breakout - mosaic-T
·
Built around the Septentrio mosaic-T module, this breakout is made for demanding timing applications such as high-accuracy time stamping, frequency synchronisation and GPS-disciplined oscillators (GPSDO).The mosaic-T is a multi-band, multi-constellation GNSS receiver with Septentrio AIM+ technolo...
Thing Plus ESP32 WROOM (U.FL)
·
Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...
GNSS Timing Breakout - ZED-F9T-20B (Qwiic)
·
Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...
