All Products

SKU: SF-GPS-18378

The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal accuracy. It connects to a MicroMod Main Board via the solderless M.2 connector and...

SKU: SF-SEN-15805

The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs with no calibration and a maximum range from -55°C to 150°C. The SparkFun High Pr...

SKU: SF-DEV-17512

The SparkFun Qwiic pHAT Extension for Raspberry Pi 400 provides access to the Pi 400's GPIO header while adding Qwiic I2C connectivity. The board connects via a 2×20 right-angle header and extends out to the edge of the PCB, allowing you to stack HATs right-side up or connect Qwiic-enabled I2C de...

SKU: SF-LCD-29467 · MPN: LCD-29467

  The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics Platform (XRP) Kit as well as Raspberry Pi Picos. This display board includ...

SKU: SF-DEV-15801

The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard USB connection, this board can request higher voltages — typically 5–20 V and up...

SKU: SF-SEN-13763

A low-cost, highly accurate digital humidity and temperature sensor breakout board based on the Silicon Labs Si7021. Communicates over I²C with just two data lines, providing relative humidity and precise temperature readings for environmental monitoring projects. The breakout includes built-in ...

SKU: SF-KIT-16274

The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous weather kits we've carried, this micro:climate kit is Qwiic enabled and includes our tried-and-true Weather Meters and Soil Moisture Sensor, so whether you’re an ...

SKU: SF-LCD-15143

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia files while keeping the pin count low. The breakout accepts both 5 V and 3.3 V po...

SKU: SF-SEN-14351

The SparkFun AS7263 breakout brings near-infrared (NIR) spectroscopy to your microcontroller projects. The sensor measures six discrete NIR wavelengths, allowing you to characterise how different materials absorb and reflect light — useful for material identification, agricultural sensing, and co...

SKU: SF-SEN-15335

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely low-power sensor supporting both I2C and SPI communication, suited for wearable...

SKU: SF-SEN-14722

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the ref...

SKU: SF-GPS-15210

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positional accuracy and faster satellite lock times. The board communicates over I2C ...

SKU: SF-LCD-23453 · MPN: LCD-23453

The SparkFun Qwiic 1.3in OLED is a compact, easy-to-use display perfect for adding a visual element to your Arduino, Raspberry Pi, or other microcontroller projects. With a vibrant 1.3-inch OLED screen and a resolution of 128x64 pixels that deliver crisp white-on-black, it's ideal for displaying ...

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: SF-SEN-16304

The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, communicating entirely over the I2C bus — no analogue conversion needed. This vers...

SKU: SF-SEN-14607

Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of 64 pixels capable of independent temperature detection. It’s like having a thermal camera, just in a lower resolution. To make it ...

SKU: SF-BOB-16281

The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout for the RV-8803 RTC, featuring a factory-calibrated temperature-compensated crystal for extremely precise timekeeping. It tracks hundredths of seconds, seconds, minutes, hours, date, month, year, and weekday, with multiple al...

SKU: SF-BOB-28468 · MPN: BOB-28468

Connect your RP2350-based board or Raspberry Pi 5 to a standard HDMI monitor using this HSTX to DVI breakout. The board translates the 22-pin HSTX display interface to an HDMI connector for DVI output, making it easy to add external display support to your projects. Includes a 22-pin flex cable ...

SKU: SF-ROB-14451

The SparkFun TB6612FNG Motor Driver breakout can independently control up to two DC motors at a constant current of 1.2 A (3.2 A peak). Each motor channel supports four modes — clockwise, counter-clockwise, short-brake, and stop — controlled via two input signals and a PWM speed input. All pins ...

SKU: SF-SEN-28020 · MPN: SEN-28020

A streamlined USB-C RFID reader for low-frequency (125kHz) RFID tags. Simply plug into your computer's USB port and the reader appears as a serial device, outputting tag IDs as text – no drivers or complex setup required. Built around the reliable CH340C USB-to-serial chip, this reader works wit...