All Products
AI Overview
Here are the main SparkFun options found—ranging from beginner kits to MicroMod/Qwiic boards and sensors.
Starter kits (best if you want a complete learning bundle)
- SparkFun Inventor's Kit - v4.1.2 ($196.35) — all-in-one electronics kit; v4.1.2 mainly updates the carrying case vs v4.1.
- Inventor's Kit for MicroPython - KIT-29326 ($238.60) — beginner-friendly kit focused on MicroPython projects, progressing from basics to more advanced builds.
Wireless / IoT dev boards
- SparkFun Thing Plus - ESP32 WROOM (USB-C) ($72.73) — ESP32-WROOM, Wi‑Fi + Bluetooth, USB‑C, Feather-compatible Thing Plus form factor.
- Thing Plus RP2350 Wireless Development Board ($63.02) — built around Raspberry Pi RP2350, geared for connected/battery IoT builds with the Thing Plus ecosystem.
- Thing Plus RP2350 Wireless Development Board (Ding & Dent) ($67.91) — Ding & Dent variant of the RP2350 Thing Plus platform.
Qwiic / sensor & interface modules (I2C/Qwiic-friendly add-ons)
- LIS3DH Triple Axis Accelerometer Breakout (Qwiic) ($8.81) — 3‑axis accelerometer breakout with Qwiic.
- SparkFun Micro 6DoF IMU Breakout - LSM6DSV16X (Qwiic) ($50.08) — 6‑axis IMU (accelerometer + gyro) with Qwiic.
- Qwiic Directional Pad (PRT-26851) ($14.73) — 5‑way navigation input over I2C/Qwiic.
- Qwiic Alphanumeric Display - Pink ($20.60) — 14‑segment alphanumeric display via Qwiic.
- Qwiic MultiStar Constellation Ornament ($10.74) — Qwiic hub that adds 4 extra Qwiic ports.
Power / expansion / carrier boards
- Ideal Diode Breakout ($10.96) — power-path help for hot swaps/one-way voltage control.
- MicroMod STM32F405 Processor Board ($43.04) — STM32F405 (Cortex‑M4) on a swappable MicroMod M.2-style module.
- MicroMod Asset Tracker Carrier Board - SARA-R510AWS ($267.25) — LTE‑M carrier built around u-blox SARA-R510AWS with AWS IoT ExpressLink.
- Ethernet Adapter for Teensy 4.1 ($9.45) — adds wired Ethernet capability for Teensy 4.1 projects.
- AgXRP Pump & Soil Moisture Sensor Expansion Pack (Beta) ($87.63) — expansion pack for AgXRP adding an additional pump + soil moisture zone.
What kind of SparkFun item are you looking for?
Collections
Showing 121-140 of 2306 products
SparkFun RFM69 Breakout (915MHz)
This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine)...
SparkFun Qwiic Shield for Teensy
The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...
SparkFun Power Driver Shield Kit
The SparkFun Power Driver Shield Kit lets you switch high-current loads directly from your Arduino using six RFP30N06LE N-channel MOSFETs. Connect a computer power supply or other DC source to drive motors, solenoids, LED strips, and other power-hungry devices with PWM control. Each of the six c...
SparkFun FTDI Basic Breakout - 5V
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to wo...
SparkFun Photon Micro OLED Shield
The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This shield is perfect for adding graphics...
SparkFun USB MicroB Plug Breakout
We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this. We broke out all 5 pins with a vertical microUSB connector for your prototyping needs. Documents: Schematic Eagle Files GitHub
SparkFun Qwiic Shield for Arduino
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5V giv...
SparkFun MicroMod ESP32 Processor
The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Tensilica LX6 at 240 MHz. Simply align the keyed edge connector with any MicroMod...
SparkFun TRRS 3.5mm Jack Breakout
TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra ...
SparkFun MicroMod STM32 Processor
The SparkFun MicroMod STM32 Processor Board brings the power of the STM32F405 ARM Cortex-M4 microcontroller to the MicroMod ecosystem. Operating at up to 168 MHz with a hardware floating point unit (FPU) and full DSP instruction set, this processor board delivers serious performance in a compact ...
SparkFun Qwiic micro:bit Breakout
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the micro:bit’s edge connector allows int...
SparkFun Qwiic Keypad - 12 Button
Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembled and makes the development process for adding...
SparkFun Qwiic Button - Green LED
Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an easy to use I2C device! Utilizing our Qwiic Con...
SparkFun Inventor's Kit for Photon
The SparkFun Inventor’s Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFun Inventor’s Kit for Photon provides you not only with the Photon RedBoard but everything you need to hook up and experiment with multiple electronic circuits! With the Pho...
SparkFun USB Mini-B Cable - 6 Foot
A 6-foot (1.8 m) USB 2.0 cable with a Type-A plug on one end and a Mini-B 5-pin plug on the other. Use it to connect cameras, USB hubs, FTDI programmers, LiPo chargers, and other devices that use the Mini-B connector. Specifications Connector A – USB Type-A (male) Connector B – USB Mini-B 5-p...
SparkFun ESP8266 Thing - Dev Board
This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink ...
SparkFun MicroMod SAMD51 Processor
With a 32-bit ARM Cortex-M4F MCU, the SparkFun MicroMod SAMD51 Processor Board is one powerful microcontroller packaged on a small board! The provides you with an economical and easy to use development platform if you're needing more power with minimal working space. With the M.2 MicroMod conn...
SparkFun Digi XBee® Explorer USB-C
·
Unleash the power of Digi XBee® modules with the next-gen SparkFun Digi XBee® Explorer USB-C! This compact, easy-to-use adapter is the perfect bridge between your computer and any through-hole Digi XBee module, making prototyping and development a breeze. Whether you're a seasoned IoT architect o...
SparkFun Qwiic LED Stick - APA102C
The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool lighting effects. You can even add more LEDs to the end if you need to. We’ve writ...
SparkFun USB-C Breakout - Vertical
With this USB-C breakout, you will be able to incorporate a vertical USB-C connector into your projects without needing to solder each tiny SMD pad. The vertical orientation of the USB-C connector also makes it convenient for panel mounts in projects.The SparkFun USB-C Breakout supplies up to thr...
