All Products
Showing 81-100 of 100 products
NEO-F9P GNSS-RTK L1/L5 Breakout with Qwiic
·
Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...
Gravity M/F DuPont Jumper Wires with Tags - 30cm (5 Pack)
·
These labelled male-to-female DuPont jumper wires make it easier to keep track of connections in busy electronics builds. Each wire carries I2C/UART pin labelling, helping reduce mix-ups when colour coding or tiny board silkscreen is hard to read.The wire sequence is the same at both ends and fol...
Gravity SFA40 Formaldehyde (HCHO) Sensor
·
This Gravity-series module is a high-precision electrochemical sensor for monitoring formaldehyde (HCHO) in indoor air. It is built around Sensirion’s SFA40 sensing chip and is designed to selectively detect HCHO while reducing false readings from common household vapours such as alcohol or perfu...
Gravity LED Switch Module - White
·
This compact illuminated push-button module combines a tactile switch with a built-in white LED indicator, making it handy for interactive electronics, prototypes and embedded control panels.The switch outputs a digital HIGH/LOW signal and runs from +3.3-5V, so it suits common development boards ...
Gravity 4-Pin M/M DuPont Cable with Tags - 30cm (5 Pack)
·
This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...
Air780EU 4G Cat 1 IoT Module for EMEA & Thailand
·
The Air780EU is a 4G Cat 1 communication module for IoT projects that need cellular connectivity across Europe, the Middle East, Russia, Thailand, Africa and other supported regions. It operates on LTE-FDD B1/B3/B7/B8/B20/B28 bands and provides up to 10Mbps downlink and 5Mbps uplink.It brings the...
Gravity 64×8 DTOF 3D Laser Ranging Sensor - SEN0682
·
This compact full-solid-state LiDAR module uses a 64×8 DTOF matrix to measure 512 points at once, giving robots and automation projects a wider view of what is directly ahead. It is designed for forward obstacle avoidance, local blind spot detection and other short-range 3D perception tasks.Direc...
LM66200 Dual Ideal Diode Breakout
·
This compact Adafruit breakout helps manage two power inputs in a small project, such as a battery, USB supply or DC wall adaptor. It uses the LM66200 dual ideal diode IC to select the higher of two inputs while helping prevent back-powering.Connect your two 2–5V supplies to Vin1 and Vin2, and th...
ACS37800 Qwiic Power Meter
·
Built around the Allegro ACS37800, this Qwiic power meter lets your project monitor voltage and current at the same time over I2C. It is designed for higher-demand loads such as 3D printers, UAVs and solar panels, with voltage monitoring up to 60VDC and current sensing up to 30A.The ACS37800 uses...
SpectraFlex Flex Sensor - 95mm with Male Pins
·
SpectraFlex is a flexible bend sensor for measuring angular deflection in research, industrial and personal electronics projects. As the sensor bends, its resistance changes, making it suitable for reading movement or flex through a simple analogue circuit.This 95mm version includes male pins for...
Teensy 4.1 Lockable Microcontroller Board
·
This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...
MyoWare 2.0 Muscle Sensor
·
Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when a muscle flexes, then outputs an analogue signal representing the strength of t...
MyoWare 2.0 LED Shield
·
This shield gives your MyoWare 2.0 Muscle Sensor an easy visual output, using a blue 10-segment bar graph to show the magnitude of a target muscle’s signal. As muscle activation increases, the LEDs climb further up the board.It snaps onto the top side of the MyoWare 2.0 Muscle Sensor using the on...
MakeKit Air:bit 2 Drone Class Kit - 6 Pack
·
This class kit bundles six Air:bit 2 drone kits for BBC micro:bit, giving students a hands-on way to build, code and fly their own drones as part of a STEAM program.Air:bit combines the approachable micro:bit ecosystem with drone flight, helping students explore coding, engineering, aerodynamics,...
16-pin Dual Contact 0.5mm Pitch FPC ZIF Connector
·
This compact connector is a 16-pin, surface-mount ZIF FPC connector with a 0.5mm pitch, suited to connecting compatible flat flexible cables to your PCB.It uses a right-angle layout with contacts on both the top and bottom, helping support dual-contact cable arrangements in tight designs. The fli...
DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32
·
This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...
Fermion BMV080 Fanless PM1/PM2.5/PM10 Air Quality Sensor
·
This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...
DFRobot CS30 RGB-D ToF Depth Camera
·
The CS30 is an integrated RGB-D 3D vision sensor that combines a Time-of-Flight depth camera with an HD colour imager. It is designed to capture detailed point cloud data for robotics, interactive AI, 3D scanning and SLAM applications.Its depth and colour data can be fused in real time, helping s...
DFRobot Flexible RGB LCD Backlight Module
·
This thin, flexible RGB light-emitting panel is designed for embedded systems, custom LCD backlights and diffuse indicator lighting. It uses separate red, green and blue channels to produce RGB colour output, with a common anode interface for driving from your own electronics.The bendable panel c...
UNIHIKER K10 Plastic Protector Case
·
This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is made from high-toughness plastic, giving the board extra protection against scrat...
