All Products

SKU: SF-PRT-30218 · MPN: PRT-30218

This 6-pin male header is a simple, reliable connector for linking components, boards or cables in electronics projects.The right-angle layout routes the pins parallel to your PCB, making it useful for low-profile builds or for bringing connections out sideways instead of vertically.With a single...

SKU: SF-PRT-28381 · MPN: PRT-28381

This is a single-row straight male header with 14 breakaway pins on standard 0.1 inch (2.54mm) spacing. It is suited to through-hole prototyping, module headers and breadboard-friendly maker projects.The 14x1 format is commonly used with Teensy 3.2 and Teensy 4.0 boards. If you are fitting header...

SKU: SF-PRT-28382 · MPN: PRT-28382

This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...

SKU: SF-PRT-27906 · MPN: PRT-27906

This single-row female header provides 20 straight receptacles on standard 0.1 inch (2.54 mm) spacing, making it useful for prototyping, repairs and custom board connections.The strip can be cut down to the length you need with a pair of wire cutters. Please note that you will probably lose one p...

SKU: SF-PRT-27908 · MPN: PRT-27908

This is a straightforward 3-pin male through-hole header for adding standard pin connections to a PCB, breakout board or prototype.The pins use the common 0.1" spacing, making the header suitable for breadboard-friendly layouts and many maker electronics projects.If you do not need all three posi...

SKU: SF-PRT-23022 · MPN: PRT-23022

This is a simple 2x6 female header for making reliable board-to-board or cable-to-board connections in your electronics projects.The header is a straight PTH style part, suitable for through-hole soldering onto compatible PCBs. Each pin is spaced 0.1" apart, matching common prototyping and maker ...

SKU: SF-PRT-22890 · MPN: PRT-22890

This compact unshrouded header provides a 2x5 pin connection in a fine 1.27mm pitch format, making it suitable for densely packed boards and small interconnects.It is an SMD header, so it is intended for surface-mount PCB layouts rather than through-hole mounting. The unshrouded design keeps the ...

SKU: SF-PRT-21570 · MPN: PRT-21570

This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and NVIDIA Jetson boards.It can also be soldered onto Pi HATs that do not already have headers fitted. Check that the HAT or board is only popula...

SKU: SF-PRT-18987 · MPN: PRT-18987

This is a simple 12-pin male straight header for plated through-hole (PTH) connections. It is handy for adding pins to PCBs, breakout boards and other projects that use the standard 0.1 inch header spacing.If you do not need the full 12-pin length, the header can be broken apart into smaller sect...

SKU: SF-PRT-08230 · MPN: PRT-08230

This male polarised header is made for perfboard and PCB projects where you want a connector that can only be plugged in the correct way around.It is suitable for power connections, sensors, and general-purpose wiring where reversing the connection could cause confusion or damage.This listing is ...

SKU: SF-PRT-08094 · MPN: PRT-08094

This polarised male header is a handy connector for perfboard and PCB projects where you want to reduce the chance of a cable being plugged in backwards or incorrectly.It can be used for power connections, sensors, or general-purpose wiring between boards and peripherals. The pins use standard 0....

SKU: SF-PRT-10208 · MPN: PRT-10208

This tiny four-pin connector is a compact option when you need a very small board-to-cable connection. It uses the smaller JST-SH style rather than the larger JST connectors commonly found on many breakout boards.The connector has a horizontal orientation and is intended for surface-mount install...

SKU: SF-WRL-30232 · MPN: WRL-30232

This RP-SMA connector is designed for edge-mounting onto a PCB, making it handy for RF prototyping and compact antenna connections.It is suited to GPS and cellular projects that need an external antenna connection brought directly to the board edge. Each connector is fitted with a female signal p...

SKU: SF-WRL-21225 · MPN: WRL-21225

This compact RF adapter has standard-polarity male SMA connectors on both ends, making it useful when you need to change a female SMA connection into a male one.It can be screwed onto the female end of an SMA female-to-male interface cable to make a short SMA male-to-male cable assembly.It is par...

SKU: SF-GPS-29203 · MPN: GPS-29203

This compact cube antenna from Molex is designed for GPS applications and surface mounting directly to a PCB. It covers a frequency range of 1.556GHz ~ 1.607GHz, making it suitable for embedded positioning projects where a low-profile board-mounted antenna is required.Electrical connectivity is v...

SKU: SF-GPS-17751 · MPN: GPS-17751

The TOP106 from TOPGNSS is a certified GNSS/GPS surveying antenna for receiving L1/L2 bands from GPS, GLONASS, Galileo and BeiDou constellations. It is suited to surveying, handheld and portable GNSS work, as well as fixed antenna installations.Inside, the antenna includes a built-in 130mm ground...

SKU: SF-COM-30154 · MPN: COM-30154

This is a basic 1 MOhms through-hole resistor with ±5% tolerance and a 1/6W power rating. It is a simple passive component suited to prototyping, repairs and general circuit building.The PTH package is commonly used with solderless breadboards, perf boards and other through-hole projects. It is s...

SKU: SF-COM-30156 · MPN: COM-30156

This is a basic 47 kOhms through-hole resistor for general electronics prototyping and repairs. It is rated for 1/4 Watt with a ±5% tolerance.The PTH leads make it easy to use with breadboards, perf boards and hand-soldered circuits. It is supplied as a single resistor, handy when you only need o...

SKU: SF-COM-27914 · MPN: COM-27914

This compact surface-mount indicator LED emits a bright green light and comes in the common 1206 package size, making it suitable for PCBs, prototypes and small production runs.It is the same green LED used on SparkFun RedBoard products and many other boards, so it is a handy choice when you want...

SKU: SF-COM-18435 · MPN: COM-18435

This through-hole resistor is a simple, breadboard-friendly passive component for prototyping and general electronics work. It is commonly used with breadboards and perf boards, making it handy for pull-ups, pull-downs, voltage dividers, current limiting and signal conditioning.The leads are desi...