All Products
AI Overview
If you searched “gravity led” for Arduino/micro:bit projects, these are the closest matches in the Gravity ecosystem:
Gravity LED String / Decorative Lighting
- Gravity: LED String Lights (Colorful) ($17.40) — ready-made colorful LED string for decoration/lighting effects.
- Gravity: Digital LED String Lights (Warm White) For Arduino - DFrobot ($17.40) — 40 warm-white LEDs on 4m wire, digital signal control via Gravity interface (great for fades/PWM).
Gravity LED Buttons (momentary)
- Gravity: LED Button - Blue ($7.90) — momentary illuminated button (lights while pressed).
- Gravity LED Button for Arduino and micro:bit - Red ($11.05)
- Gravity LED Button for Arduino/micro:bit - Yellow ($11.05)
- Gravity LED Button Module for Arduino/micro:bit - Green ($11.05)
- DFRobot Gravity LED Button for Arduino and micro:bit - White ($11.05)
- Gravity: LED Button x 5 Pack ($39.25) — bundle with 5 colors (red/yellow/green/blue/white).
Gravity LED Switches (self-locking / latching)
- Gravity: LED Switch - Blue ($7.35) — latching/self-locking illuminated switch.
- Gravity LED Self-Locking Switch - Red ($11.05)
- DFRobot Gravity LED Switch Module - Green ($11.05)
- Gravity LED Switch Module - White ($11.05)
- DFRobot Gravity LED Self-Locking Switch - Yellow ($11.05)
- Gravity: LED Switch x 5 Pack ($36.40) — bundle with 5 colors (red/yellow/green/blue/white).
Simple single-color LED output modules
- Gravity: Digital Blue LED Light Module ($3.00) — easy digital on/off LED.
- Gravity: Digital Green LED Light Module ($3.00) — easy digital on/off LED.
- Gravity: Bright LED Module ($3.75) — higher-brightness LED option.
What kind of “Gravity LED” are you after?
Showing 1-20 of 100 products
Gravity M/F DuPont Jumper Wires with Tags - 30cm (5 Pack)
·
These labelled male-to-female DuPont jumper wires make it easier to keep track of connections in busy electronics builds. Each wire carries I2C/UART pin labelling, helping reduce mix-ups when colour coding or tiny board silkscreen is hard to read.The wire sequence is the same at both ends and fol...
Gravity PH2.0 to Female DuPont Tagged Cable 30cm - 5 Pack
·
These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, ground, clock/receive and data/transmit lines without relying only on wire colour o...
DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack
·
These tagged Gravity cables help keep wiring clear when a project has lots of similar-looking connections. Each lead carries I2C/UART pin labels, making it easier to identify signals during wiring, testing and debugging.The wire sequence is kept the same at both ends and follows the latest DFRobo...
Gravity Flexible Non-Contact Capacitive Liquid Level Sensor
·
This flexible capacitive liquid level sensor detects liquid through the wall of a non-conductive container, so it does not need to touch the liquid itself. It is designed for containers with a wall thickness of less than 5 mm, making it handy for sealed tanks, pipes and other setups where a conta...
Gravity Calibrated NH3 Ammonia Sensor - I2C/UART
·
This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontroller and single-board computer projects.The probe is factory-calibrated for quick s...
Gravity LoRaWAN Node Module EU868 - SX1262
·
This Gravity node module is a long-range, low-power wireless communication module for outdoor IoT sensor projects. It is based on the Semtech SX1262 RF chip, uses LoRa modulation, and operates on the EU868 frequency band for Europe and other regions that use this band.The module can work in LoRa ...
Gravity SFA40 Formaldehyde (HCHO) Sensor
·
This Gravity-series module is a high-precision electrochemical sensor for monitoring formaldehyde (HCHO) in indoor air. It is built around Sensirion’s SFA40 sensing chip and is designed to selectively detect HCHO while reducing false readings from common household vapours such as alcohol or perfu...
DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280)
·
This compact Gravity module combines a Bosch BNO055 absolute orientation sensor with a BMP280 barometric pressure and temperature sensor to create a 10DOF AHRS module for motion, heading and environmental sensing.The BNO055 integrates a triaxial 14-bit accelerometer, triaxial 16-bit gyroscope, tr...
Gravity LED Switch Module - White
·
This compact illuminated push-button module combines a tactile switch with a built-in white LED indicator, making it handy for interactive electronics, prototypes and embedded control panels.The switch outputs a digital HIGH/LOW signal and runs from +3.3-5V, so it suits common development boards ...
Gravity LED Self-Locking Switch - Red
·
This illuminated pushbutton module is a simple self-locking switch with a built-in red LED for clear visual feedback. Press it once and the module outputs High while the LED turns on; press it again and the output goes Low while the LED turns off.It is designed for easy use in Arduino, micro:bit ...
DFRobot Gravity LED Switch Module - Green
·
This compact illuminated push-button module combines a tactile switch with a built-in green LED indicator, making it handy for interactive electronics, control panels and classroom builds.It uses a self-locking toggle action rather than a momentary press. Press the button once and the output goes...
Gravity LED Button Module for Arduino/micro:bit - Green
·
This compact illuminated push-button module adds a simple, visible input to interactive electronics, classroom prototypes and maker projects. A transparent cap shows the integrated LED, which lights as soon as the button is pressed for clear visual feedback.It uses the Gravity PH2.0-3P connector ...
Gravity LED Button for Arduino and micro:bit - Red
·
This compact illuminated push-button module is designed for interactive electronics and quick prototyping. A transparent cap sits over an internal red LED, giving instant visual feedback when the button is pressed.The module provides a simple digital output for microcontroller input detection: wh...
Gravity LED Button for Arduino/micro:bit - Yellow
·
This LED-illuminated button module is a simple digital switch with a transparent cap and a yellow light. It works like a basic button, but the internal LED turns on while the button is pressed, giving clear visual feedback for interactive projects.When pressed down, the module outputs High and th...
Gravity HF Gas Sensor (Calibrated) - I2C/UART/Analogue
·
Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industrial and environmental protection applications.The sensor includes integrated tempe...
Gravity 4-Pin PH2.0 to DuPont Male I2C/UART Cable Pack 30cm
·
This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont male connectors on the other, making it useful for I2C or UART wiring in maker pr...
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
·
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...
Gravity BMP581 Barometric Pressure & Temperature Sensor - I2C/UART
·
This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude hold, indoor navigation, weather logging and hiking altimeters.The board support...
Gravity BMP585 Barometric Pressure & Temperature Sensor (I2C/UART)
·
Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help it resist water, moisture and chemical exposure, making it better suited to dem...
Gravity 64×8 DTOF 3D Laser Ranging Sensor - SEN0682
·
This compact full-solid-state LiDAR module uses a 64×8 DTOF matrix to measure 512 points at once, giving robots and automation projects a wider view of what is directly ahead. It is designed for forward obstacle avoidance, local blind spot detection and other short-range 3D perception tasks.Direc...
