Sensors & Input

SKU: SF-GPS-28929 | Brand: SparkFun

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG...

SKU: AF-6355 | Brand: Adafruit

The Adafruit PiCowbell Adalogger is a data logging add-on board designed to socket underneath a Raspberry Pi Pico or Pico W. It provides a microSD card slot, a PCF8523 real-time clock with battery backup, and a STEMMA...

SKU: AF-6335 | Brand: Adafruit

A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) ...

SKU: AF-5980 | Brand: Adafruit

The Feather RP2040 Adalogger combines the RP2040 dual-core processor with a MicroSD card holder for data logging and file storage. It features 8 MB SPI flash, 264 KB SRAM, USB Type C, STEMMA QT connector, and built-in...

SKU: SF-GPS-22660 | Brand: SparkFun

The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology....

SKU: SF-GPS-22560 | Brand: SparkFun

With GNSS, you can know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy, the better! Our versatile global positioning combo breakout pair...

SKU: SF-SEN-21273 | Brand: SparkFun

The SparkFun STTS22H Micro Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor STTS22H from ST Microelectronics and housed in our Qwiic Micro for...

SKU: AF-5671 | Brand: Adafruit

ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption,...

SKU: SF-SEN-20176 | Brand: SparkFun

The SparkFun Qwiic Micro ISM330DHCX Six Degrees of Freedom IMU is a micro-sized 0.75in. by 0.30in. sensor featuring STMicroelectronics' ISM330DHCX; a high-performance 3D digital accelerometer and 3D digital gyroscope ...

SKU: DF-DFR0963 | Brand: DFRobot

This is an embedded serial-to-Ethernet module based on the ESP32 series, also can be called a gateway. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the net...

SKU: AF-4919 | Brand: Adafruit

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...

SKU: M5-U008 | Brand: Little Bird

The FINGER Unit (FPC1020A) is an all-in-one capacitive fingerprint sensor with built-in fingerprint registration, verification, and management. It communicates via UART and connects to M5Stack devices through the Grov...

SKU: M5-U069 | Brand: Little Bird

Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully di...

SKU: M5-U026 | Brand: Little Bird

The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit...

SKU: M5-U068 | Brand: Little Bird

The M5StickC DAC HAT is a plug-in module that adds a 12-bit digital-to-analogue converter (DAC) to your M5StickC. Built around the MCP4725 chip, it provides a single-channel analogue voltage output from 0 to 3.3 V, co...

SKU: M5-M011 | Brand: Little Bird

Description COMMU is a Muti-Communication-Interface-Converter. Integrated with 2IIC, 1TTL, 1CAN, 1RS485. Apparently COMMU has packed with most of series communications. Default connection: TTL - UART0, RS485 -...

SKU: M5-K002 | Brand: Little Bird

Description M5Stack GRAY Kit is from one of the M5Stack development kit series, it’s a upgrade from the Basic kits. In comparison, Gray kit provide a extra IMU sensor, MPU6886+BMM150. With a IMU posture sensor...

SKU: M5-A047 | Brand: Little Bird

The PIANO is an acrylic piano keyboard base for M5Stack Core modules, designed for music and sound projects. It features two TS20 capacitive touch sensor ICs that communicate with the M5 Core via I2C, along with RGB L...

SKU: PR-PIM197 | Brand: Little Bird

Use this 3D interface to sense things floating in the air over it. Detect swipes and the motion of your hand with X, Y and Z positions.Skywriter HAT uses electrical near-field 3D sensing to generate positional da...

SKU: PI-ESP004 | Brand: Pimoroni

This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...