Sensors & Input

SKU: SF-SEN-29528 | Brand: SparkFun

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...

SKU: SF-SEN-29854 | Brand: SparkFun

This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encr...

SKU: SF-GPS-17722 | Brand: SparkFun

Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accu...

SKU: SF-SEN-25200 | Brand: SparkFun

Build a detailed indoor air monitor with this Qwiic combo board, pairing Sensirion’s SCD41 CO2 sensor with the SEN55 environmental sensor node. Together they measure CO2, volatile organic compounds (VOCs), particulate...

SKU: SF-WRL-29210 | Brand: SparkFun

This MicroMod carrier board is built around the u-blox SARA-R510AWS module and AWS IoT ExpressLink, giving your MicroMod processor a simpler path to secure AWS cloud connectivity over LTE-M. Please note that this modu...

SKU: DF-KIT0131 | Brand: DFRobot

Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data c...

SKU: DF-SEN0678 | Brand: DFRobot

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitor...

SKU: DF-SEN0628 | Brand: DFRobot

This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interacti...

SKU: DF-SEN0666 | Brand: DFRobot

This compact Fermion breakout brings the Bosch BMP585 MEMS pressure and temperature sensor to a tiny board for projects where space, power use and reliable environmental sensing matter. It measures barometric pressure...

SKU: DF-SEN0663 | Brand: DFRobot

This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass con...

SKU: DF-SEN0667 | Brand: DFRobot

This compact Fermion module is built around Bosch Sensortec’s BMP581 high-performance barometric pressure sensor chip. It measures pressure and temperature with high precision, offering ±0.3 hPa typical absolute press...

SKU: SF-KIT-30715 | Brand: SparkFun

Add another controlled planting area to an existing AgXRP Starter Kit with this DIY expansion pack. It is designed to create a completely independent watering zone, so students can compare plant types, watering schedu...

SKU: SF-DEV-20812 | Brand: SparkFun

Designed for FLIR Lepton Longwave Infrared (LWIR) camera cores, this board turns a compatible Lepton into a hackable thermal webcam module. It ships preconfigured as a plug-and-play UVC 1.0 USB thermal webcam for stan...

SKU: SF-DEV-27510 | Brand: SparkFun

Add the user interface and power features needed to take a compatible SparkFun development board into the field. This shield brings together battery power, charging, storage and controls in a compact add-on board.Powe...

SKU: SF-SEN-20659 | Brand: SparkFun

Add 3-axis motion sensing to your project with this LIS3DH accelerometer breakout from SparkFun. The LIS3DH is a low-power, capacitive micro-machined accelerometer with 12 bits of resolution, suitable for detecting tr...

SKU: SF-SEN-29259 | Brand: SparkFun

Built around the Allegro ACS37800, this Qwiic power meter lets your project monitor voltage and current at the same time over I2C. It is designed for higher-demand loads such as 3D printers, UAVs and solar panels, wit...

SKU: SF-SEN-30282 | Brand: SparkFun

Build a connected weighing system without starting from low-level load cell code. OpenScale IoT is a wireless scale controller built around the ESP32-PICO-MINI, designed to turn a standard load cell setup into a confi...

SKU: AF-6411 | Brand: Adafruit

Bosch’s BMP580 is a precision barometric pressure, temperature and altimeter sensor for projects that need fine height or pressure tracking. It follows on from Bosch’s BMP2xx and BMP3xx sensors and can be used over ei...

SKU: AF-6310 | Brand: Adafruit

This breakout turns the ANO rotary encoder wheel into an easy-to-use I2C input device. The ANO wheel gives you a clicky, scroll-wheel-style interface with a rotary control plus five button switches, without needing to...

SKU: AF-6357 | Brand: Adafruit

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for fric...