All Products
Showing 41-60 of 89 products · 11 unavailable products hidden
Thing Plus RP2350 Wireless Development Board (Ding & Dent)
·
This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...
Qwiic Alphanumeric Display - Pink
·
Add bright pink letters, numbers and symbols to your project with this Qwiic alphanumeric display. Its fourteen-segment digits give you far more flexibility than a standard seven-segment display, making it useful for status readouts, short labels, timers and compact user interfaces.The board uses...
Qwiic MultiStar Constellation Ornament
·
Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...
MicroMod STM32F405 Processor Board
·
This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...
Inventor's Kit for MicroPython - KIT-29326
·
Start learning embedded electronics with a complete MicroPython kit designed for beginners. It guides you from blinking your first LED through to building and programming an autonomous robot, with no prior programming or electronics experience required.The kit is built around MicroPython, a begin...
LIS3DH Triple Axis Accelerometer Breakout (Qwiic)
·
Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, orientation and tap detection.This board is classified as a 3DoF, or 3 Degrees of...
Qwiic Directional Pad (PRT-26851)
·
Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The board uses a PCA9554 8-bit I2C I/O expander to read the momentary buttons, with ...
Ethernet Adapter for Teensy 4.1
·
This adapter makes it straightforward to add a wired Ethernet connection to a Teensy 4.1. It brings the functionality of the Ethernet Kit for Teensy 4.1 onto a single board, helping you get a network-capable setup together with less assembly.The tricky parts are already taken care of, with the RJ...
SparkFun Micro 6DoF IMU Breakout - LSM6DSV16X (Qwiic)
The SparkFun Micro 6DoF IMU Breakout features the STMicroelectronics LSM6DSV16X — a high-performance, low-power 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope. Its triple-core architecture processes data on three separate channels (UI, OIS, EIS) with dedicated configuration, processi...
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
SparkFun microSD Sniffer
The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card into the onboard socket — all SPI signals are then broken out to an 8-pin 0.1″ pitc...
SparkFun Line Sensor Breakout - QRE1113 (Digital)
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF capacitor discharges, the more reflective the surface. This makes it straightforwa...
SparkFun FTDI Basic Breakout - 3.3V
The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, LilyPad, and other 3.3V boards that use the FTDI connector. The board brings out...
SparkFun USB Mini-B Breakout
A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregulated). Key Features All 5 Pins Broken Out – VCC, D-, D+, ID, and GND Breadb...
SparkFun RFID USB Reader
The SparkFun RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID wil...
SparkFun Single Lead Heart Rate Monitor - AD8232
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate...
SparkFun MP3 Player Shield
The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using on...
SparkFun Solder-able Breadboard - Large
This is the Large SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our full-size breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all...
SparkFun LiPo Charger Basic - Micro-USB
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer ba...
SparkFun Solder-able Breadboard - Mini
This is the Mini SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces i...
