All Products
AI Overview
If you meant Raspberry Pi 40-pin GPIO (2x20, 2.54mm pitch) headers, these are the best fits:
Raspberry Pi 2x20 (40-pin) GPIO headers
- Standard 2x20 male header (great for Pi Zero or any board needing a through-hole GPIO header): Raspberry Pi GPIO Male Header - 2x20 ($1.55)
- Keyed/polarised boxed (shrouded) 2x20 for ribbon-cable style connections: Raspberry Pi GPIO Shrouded Header - 2x20 ($2.15)
- Stacking/extra-tall 2x20 female for HAT stacking/clearance:
- Low-profile HAT headers:
- Through-hole short female: GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header ($4.20)
- SMT short female: SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header ($3.90)
- Extra reach/clearance female headers (extended height options):
Single-row “40-pin” breakaway strips (not 2x20)
If you meant one row of 40 pins (common for Arduino/prototyping), these are 2.54mm pitch breakaway strips:
- Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Black ($3.75)
- Longer pins: 40 Pin Break Away Male Header- Long Straight-10 Pcs ($4.75)
- Right-angle: 40 Pin Break Away Male Header- Right Angle-10 Pcs ($3.75)
- Single-row female strip: 40 Pin Female Header Strip ($1.55)
Related (if you’re extending the Pi’s 40-pin header)
- 40-pin GPIO extender cable (2x20 to 2x20): 40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long ($7.00)
- Breakout/extension kit: GPIO Kit for Raspberry Pi Model B+ ($5.85)
(For completeness, if you meant jumper shunts rather than headers: 40 Pin Dual In-Line (DIL) / Jumpers ($2.30))
Showing 21-40 of 74 products · 26 unavailable products hidden
Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier
·
The Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement over a simple I2C interface. Connect your thermocouple, wire up I2C (or use the solderless STEMMA QT connector), and read accurate temperature data from K, J, T, N, S, E, B, ...
Adafruit TS3USB30 1 to 2 USB Switch
·
The Adafruit TS3USB30 is a 1-to-2 USB switch breakout board that lets you connect one of two USB peripheral devices to a single USB host port. Based on the TI TS3USB30, it handles high-bandwidth USB 2.0 connections up to 480 Mbps — ideal when you need to switch between two USB devices without usi...
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi
·
The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated 3D IMU (accelerometer and gyroscope), wheel ticks, and a vehicle dynamics model...
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Black
A pack of 10 black straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers, and pre-crimped jumper wires. Each strip can be easily snapped into smaller ...
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Red
A pack of 10 red straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers, and pre-crimped jumper wires. Each strip can be easily snapped into smaller se...
DFRobot Fermion BMI323 6DOF IMU Sensor
·
Built around the Bosch BMI323, this compact Fermion module combines a 3-axis accelerometer and a 3-axis gyroscope on a 16 mm × 16 mm board. It provides high-rate acceleration and angular velocity data over I²C for embedded motion sensing, wearables, robotics, battery-powered IoT nodes and compact...
Header - 10-pin Female (PTH, 0.1)
A standard 10-pin female header with 0.1" (2.54 mm) pitch, designed for through-hole soldering. Mates with standard 10-pin male headers for board-to-board connections, breakout boards, and prototyping. Specifications Pin Count – 10 (1×10) Pitch – 0.1" (2.54 mm) Mounting – Through-hole (PTH) ...
Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Blue
A pack of 10 blue straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers, and pre-crimped jumper wires. Each strip can be easily snapped into smaller s...
Stackable Header - 8 Pin
An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at standard 0.1″ (2.54mm) pitch. Specifications Pin Count – 8 pins, single row Pi...
JST PH 3-Pin to Male Header Cable - 200mm
·
The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connections to a breadboard or development board. At 200 mm long, this cable provides en...
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
·
A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...
Adafruit Feather RP2040 with USB Type A Host
The Feather RP2040 with USB Type A Host adds a full USB Type A port to the Feather, letting you connect USB devices like keyboards, mice, flash drives, and serial peripherals. The USB host functionality is achieved through the RP2040's PIO peripheral, which emulates a USB host controller while ke...
1.54inch E-Paper Display Development Board
The product is a high-performance, highly integrated microcontroller development board designed by Waveshare. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-li...
SAM-M8Q GNSS Receiver (Qwiic)
·
Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free I2C integration with compatible boards.The board includes an integrated smart a...
Gravity BMP581 Barometric Pressure & Temperature Sensor - I2C/UART
·
This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude hold, indoor navigation, weather logging and hiking altimeters.The board support...
Gravity BMP585 Barometric Pressure & Temperature Sensor (I2C/UART)
·
Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help it resist water, moisture and chemical exposure, making it better suited to dem...
GNSS Flex Breakout Carrier Board
·
This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. The standard 2x10 male headers accept a GNSS Flex module and expose its available ...
SGP41 VOC & NOx Gas Sensor Breakout
·
Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or analogue readings yourself.The sensor combines two MOX hot-plate sensing elements...
DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32
·
This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...
Fermion BMV080 Fanless PM1/PM2.5/PM10 Air Quality Sensor
·
This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...
