All Products
AI Overview
Best picks for BBC micro:bit (V1/V2) projects—whether you need the board, power, protection, classroom packs, or a robot kit.
Core boards & starter bundles
- BBC micro:bit (board only) ($36.20)
- micro:bit v2 Go Bundle (easy starter bundle) ($30.55)
- micro:bit v2 Board (v2.21 board) ($44.50)
- micro:bit v2 Board (board) ($27.40)
Essentials: USB + batteries (portable power)
- micro:bit USB A to Micro USB Cable - 30cm Black (USB-A → Micro-USB, short lead) ($7.15)
- micro:bit AAA Battery Box with Switch (2×AAA, on/off switch) ($7.15)
- micro:bit AAA Battery Box without Switch (2×AAA) ($7.15)
- micro:bit Battery Holder - 2xAAA (JST-PH) (JST-PH to micro:bit battery port) ($2.00)
- micro:bit Battery Holder - 2xAA (JST-PH) (JST-PH to micro:bit battery port) ($3.55)
Protection & add-ons
- MI:pro Protector Case for micro:bit V1/V2 (fits V1/V2) ($14.40)
- MI:pro Mountable Case for micro:bit V1/V2 (fits V1/V2, mountable) ($11.90)
- Kitronik MI:power Board V2 for BBC micro:bit (coin-cell power + buzzer) ($17.20)
- Edge Connector Breakout Board for BBC micro:bit - Pre-built (breaks out the edge connector pins) ($10.40)
Classroom / bulk packs
- micro:bit Classroom Lab Pack (10 boards + classroom essentials) ($849.45)
- micro:bit Classroom Class Pack (30 Students) (30× micro:bit v2 + cables, battery holders, cases) ($1356.30)
Robots & STEAM kits (micro:bit-powered builds)
- DFRobot Maqueen Lite ROB0148 micro:bit Robot Platform (robot base for micro:bit) ($78.65)
- Maqueen Lite V5 micro:bit Robot Kit for STEM (Line Tracking & Obstacle Avoidance) (line tracking + obstacle avoidance) ($61.80)
- Maqueen Lite micro:bit V2 Robot Kit with Enclosure & Track Map (bundle with micro:bit V2) ($151.95)
- micro:Maqueen Plus V2 Robot Kit with Mechanic & micro:bit V2 (larger robot bundle with micro:bit V2) ($287.40)
- Air:bit 2 micro:bit Drone Kit (build/code/fly micro:bit drone) ($229.00)
What are you looking for most with micro:bit?
Collections
Showing 81-100 of 110 products
ESP32-S2 Saola 1R Dev Kit featuring ESP32-S2 WROVER
·
ESP32-S2 Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Just about all of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2 Saola-1 on a breadboard - we...
Maker Pi RP2040 - Motor and Robot Controller
Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chi...
Adafruit CP2105 Friend - USB to Dual UART Serial Converters
·
The Adafruit CP2105 Friend provides two independent UART serial ports from a single USB-C connection — no USB hub required. Built around the Silicon Labs CP2105 dual-port bridge, it enumerates as two separate COM ports when plugged in, giving you an Enhanced port and a Standard port with differen...
Elecrow Raspberry Pi Pico Advanced Kit with 32 Modules and 32 Projects Lessons
This Raspberry Pi Pico advanced kit is designed for people who already have some electronics knowledge and programming skills and are interested in the Raspberry Pi. If you want to continue to strengthen your thinking, hands-on ability, and innovation ability, the Raspberry Pi pico advanced ki...
Coretec 'Tiny 4WD' Robot Rover
This well-crafted kit from Coretec Robotics has all the bits for the heart of your own capable little four-wheel drive rover. Includes: Explorer pHAT with motor drivers and IO Acrylic Chassis with camera mount All the needed nuts and bolts 4x Micro Metal Gear Motor with easy-connect shim...
USB Li-ion Cordless Screwdriver 3.6V
This compact cordless screwdriver features a 3.6V lithium-ion battery with USB charging, making it easy to recharge from any USB port — at home, in the car, or on the go. The full metal gearbox delivers 3 Nm of torque at 350 RPM for reliable driving power in a pocket-friendly form factor. The an...
Dual Digital Potentiometer (100K) (Pre-Order)
Digital potentiometer is also called "Digital Pot" in short. It is a kind of mixed signal IC, which is able to dynamically change the internal resistors through MCU like Arduino. It can be applied to applications such as LED DC dimming, linear stable voltage source, oscillator, low pass filter o...
Hummingbird FS90 Micro Servo
·
The little servo in the Hummingbird range. Lower torque and lower cost than the full-size units, and small enough to hide inside a cardboard puppet or a lightweight walking robot. Good for expressive faces, flapping wings, moving arms and any build where the mass of a standard servo would be a pr...
Micro B Round Panel Mount Extension Cable - 30cm
·
This round panel-mount extension cable adds a USB Micro-B port to your project enclosure without the need for custom-shaped cutouts. The 30 mm diameter adapter fits a standard round hole — drill it with a common hole saw or bit, unscrew the plastic nut, insert the adapter, and tighten. You get a ...
DotStar Micro LEDs (APA102–2020) - Smart SMD RGB LED - 10 pack
·
These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of the ones in our digital DotStart strips and matrices with full chainable 2-wire control. They are just mind-bogglingly small. They are ...
Qwiic Micro Dynamic NFC/RFID Tag
The STMicroelectronics ST25DV dynamic Near Frequency Communication / Radio Frequency Identification tag ICs are awesome! The ST25DV64KC offers 64-kBit (8-kBytes) of EEPROM memory which can be accessed over both I2C and RF (NFC)! It's a state-of-the-art tag which conforms to ISO/IEC 15693 or NFC F...
KnowFlow Basic Water Monitoring Kit
·
Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...
micro:bit Classroom Class Pack (30 Students) Kit
·
Everything a teacher needs for a one-micro:bit-per-student classroom: 30× BBC micro:bit v2 boards, 30× colour-coded USB cables, 30× AAA battery holders, and 30× protective cases — ready to hand out, plug in, and code. Ideal for primary and secondary Digital Technologies, Design & Technologies, a...
Programming Kit for Micro:Bit
This programming kit is a broad starter set for experimenting with a micro:bit board v1, sensor modules, displays, outputs and simple input devices.It includes the micro:bit board, an extension board, USB cable, acrylic plastic piece, 400 point breadboard, wiring, storage box and a large collecti...
Kitronik MI:power Board V2 for BBC micro:bit
·
Add portable power and sound to your BBC micro:bit projects with this lightweight add-on PCB. It fits snugly against the micro:bit and includes a built-in buzzer plus a 3V coin cell holder, making it well suited to wearable projects, badges and handheld builds.This V2 board has been redesigned to...
Blue 50cm Micro USB cable with Data Line for Micro:bit
This handy blue Micro USB cable includes the data lines needed for connecting compatible boards to a computer, not just charging.At 50cm long, it is a compact choice for use on a desk, in a classroom kit, or with a laptop when programming boards such as the micro:bit and Raspberry Pi Pico.Specifi...
micro:bit USB A to Micro USB Cable - 30cm Black
·
This official micro:bit-branded USB cable is a short, reliable lead for powering and programming BBC micro:bit development boards. It connects a standard USB-A port on a computer or hub to the Micro USB socket on compatible microcontroller boards.At 30 cm long, it is well suited to classroom desk...
micro:bit AAA Battery Box without Switch
·
This compact battery box is an official micro:bit accessory for powering microcontroller experiments, classroom activities and portable embedded projects. It holds two AAA batteries and connects directly to a micro:bit development board through the standard JST lead.The lightweight plastic holder...
micro:bit AAA Battery Box with Switch
·
This AAA battery holder is a simple portable power option for micro:bit development boards. It holds two AAA cells and connects directly to the board’s power interface, making it useful when you want to run a project away from USB power.The built-in slide switch lets students and makers turn powe...
DFRobot DFR1216 Expansion Board for UNIHIKER M10/K10 & micro:bit
·
This multi-function expansion board adds power, I/O and drive capability to UNIHIKER M10/K10 and micro:bit projects. It is designed for mobile robots, portable interactive builds and maker projects that need more connectivity than the main controller can provide on its own.The board expands your ...