All Products
AI Overview
Here are the main SparkFun options found—ranging from beginner kits to MicroMod/Qwiic boards and sensors.
Starter kits (best if you want a complete learning bundle)
- SparkFun Inventor's Kit - v4.1.2 ($196.35) — all-in-one electronics kit; v4.1.2 mainly updates the carrying case vs v4.1.
- Inventor's Kit for MicroPython - KIT-29326 ($238.60) — beginner-friendly kit focused on MicroPython projects, progressing from basics to more advanced builds.
Wireless / IoT dev boards
- SparkFun Thing Plus - ESP32 WROOM (USB-C) ($72.73) — ESP32-WROOM, Wi‑Fi + Bluetooth, USB‑C, Feather-compatible Thing Plus form factor.
- Thing Plus RP2350 Wireless Development Board ($63.02) — built around Raspberry Pi RP2350, geared for connected/battery IoT builds with the Thing Plus ecosystem.
- Thing Plus RP2350 Wireless Development Board (Ding & Dent) ($67.91) — Ding & Dent variant of the RP2350 Thing Plus platform.
Qwiic / sensor & interface modules (I2C/Qwiic-friendly add-ons)
- LIS3DH Triple Axis Accelerometer Breakout (Qwiic) ($8.81) — 3‑axis accelerometer breakout with Qwiic.
- SparkFun Micro 6DoF IMU Breakout - LSM6DSV16X (Qwiic) ($50.08) — 6‑axis IMU (accelerometer + gyro) with Qwiic.
- Qwiic Directional Pad (PRT-26851) ($14.73) — 5‑way navigation input over I2C/Qwiic.
- Qwiic Alphanumeric Display - Pink ($20.60) — 14‑segment alphanumeric display via Qwiic.
- Qwiic MultiStar Constellation Ornament ($10.74) — Qwiic hub that adds 4 extra Qwiic ports.
Power / expansion / carrier boards
- Ideal Diode Breakout ($10.96) — power-path help for hot swaps/one-way voltage control.
- MicroMod STM32F405 Processor Board ($43.04) — STM32F405 (Cortex‑M4) on a swappable MicroMod M.2-style module.
- MicroMod Asset Tracker Carrier Board - SARA-R510AWS ($267.25) — LTE‑M carrier built around u-blox SARA-R510AWS with AWS IoT ExpressLink.
- Ethernet Adapter for Teensy 4.1 ($9.45) — adds wired Ethernet capability for Teensy 4.1 projects.
- AgXRP Pump & Soil Moisture Sensor Expansion Pack (Beta) ($87.63) — expansion pack for AgXRP adding an additional pump + soil moisture zone.
What kind of SparkFun item are you looking for?
Collections
Showing 201-220 of 2306 products
SparkFun Serial Basic Breakout - CH340G
The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily con...
SparkFun Quadstepper Motor Driver Board
The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The lo...
SparkFun I2S Audio Breakout - MAX98357A
The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S (not be confused with I2C) audio to an analog signal to drive speakers. The I2S Audio Breakout converts the digital audio signals using the I2S standard to an analog signal and amplifies...
SparkFun 16x2 SerLCD - RGB Text (Qwiic)
The SparkFun 16×2 SerLCD is a serial-enabled LCD that provides a simple, cost-effective way to add an RGB-on-black liquid crystal display to your project. An on-board ATmega328P microcontroller handles all screen control, eliminating the need for a separate backpack board. The display supports t...
SparkFun LiPo Charger Basic - Micro-USB
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer ba...
SparkFun Parts Box - LilyPad (Magnetic)
When you’re working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles, the tools of the trade. Why not pick up a sturdy little box to keep your bits and pieces off the floor? This LilyPad branded box is made from rigid cardboard printed with a ...
SparkFun Solder-able Breadboard - Large
This is the Large SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our full-size breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all...
SparkFun Arduino ProtoShield - Bare PCB
The SparkFun Arduino ProtoShield is a bare PCB with no attached or included parts that lets you customize your own Arduino shield using whatever circuit you can come up with! You will even be able to test your circuit or project to make sure everything is working the way it should! The Spark...
SparkFun 7-Segment Serial Display - Red
A 4-digit 7-segment display with a built-in ATmega328 microcontroller, controllable via Serial TTL, SPI, or I²C — no complex wiring or multiplexing required. Each segment, decimal point, apostrophe, and colon can be individually controlled. The ATmega328 comes pre-loaded with the Arduino bootload...
SparkFun PIR Breakout Starter Kit (1uA)
The SparkFun PIR Breakout Starter Kit includes everything needed to get started with passive infrared motion detection. Built around the Panasonic EKMB1107112 PIR sensor, this kit's breakout board offers ultra-low 1µA standby current, making it ideal for battery-powered motion-sensing application...
SparkFun QuickLogic Thing Plus - EOS S3
The SparkFun QuickLogic Thing Plus EOS™ S3, is a small form factor system ideal for enabling the next generation of low-power Machine Learning (ML) devices. The QuickLogic Thing Plus is powered by QuickLogic’s EOS S3, the first eFPGA-enabled Arm Cortex©-M4F MCU to be fully supported with Zephyr R...
SparkFun Transceiver Breakout - MAX3232
The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and broken out all the pins you need to set up your RS232 to TTL connection. We’ve also...
SparkFun Level Shifting microSD Breakout
The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not...
SparkFun Thing Plus - XBee3 Micro (U.FL)
The XBee3 Thing Plus is an ultra capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space conscious design represents a much needed update to our XBee offering. With 20 I/O pins and Lithium Polymer Ion battery management, the XBee3 Thing Plus...
SparkFun 7-Segment Serial Display - Blue
The SparkFun 7-Segment Serial Display combines a 4-digit 7-segment LED display with an ATmega328 microcontroller, allowing you to control every segment using just a few serial lines. It supports three communication interfaces — Serial TTL, SPI, and I²C — making it easy to integrate into a wide ra...
SparkFun AzureWave Thing Plus - AW-CU488
The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It also consists of a dual processor core: Rea...
SparkFun Qwiic EEPROM Breakout - 512Kbit
The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512 kilo-bits (or 64 kilo-bytes) of storage, this product is great for any microcontroller that doesn't have any EEPROM storage space, like the SAMD21. You can use the Qwi...
SparkFun Current Sensor Breakout - INA169
The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the measured voltage drop. If you place a resistor from the...
SparkFun FM Tuner Basic Breakout - Si4703
The SparkFun FM Tuner Basic Breakout is built around the Silicon Labs Si4703 FM tuner IC, providing a full-featured FM radio receiver on a compact breakout board. Beyond standard FM reception, the Si4703 supports Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS), enabling display o...
SparkFun Qwiic Mini dToF Imager - TMF8820
The SparkFun Qwiic Mini dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter ...
