All Products

SKU: PI-COM0424

A 16mm yellow/orange illuminated momentary button that's ideal as a power button for our Picade X HAT, or just for situations when you need a small illuminated button. Features Momentary switch Yellow/orange translucent cap with LED 2.8mm spade connectors for switch 2.8mm spade connector...

SKU: SF-BOB-15931

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all of those nasty worries away into an easy to use I2C device! Utilizing our Qwiic Connect S...

SKU: AF-5436

A squishy silicone button module with a built-in PWM controller and colour-changing power indicator. Press to cycle through three power levels — 100%, 70%, and 35% duty cycle — with the illuminated power symbol glowing red, blue, or green to show the current setting. Long press for two seconds to...

SKU: PI-CAB1200

This wiring loom has all the cables and connectors you'll need to connect a joystick, arcade buttons, and illuminated button to Picade X HAT. It's ideal for DIY arcade cabinet builds. The loom consists of four separate sets of wires (26AWG), all 35cm long: 5-pin female connector ...

SKU: PI-PIM462

The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...

SKU: DF-DFR0785-W · MPN: DFR0785-W

This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear visual feedback.The module behaves like a basic digital switch: when pressed do...

SKU: AF-6274 · MPN: ADA6274

A large 44 mm square illuminated push button with a satisfying clicky micro-switch — commonly seen in arcade games of skill. The black plastic body is easy to mount on panels and enclosures, and the snap-in lamp holder accepts a standard LED for backlighting. The button comes with a clear white ...

SKU: AF-6270 · MPN: ADA6270

This 51mm square button is cute, inviting, and ready for all sorts of pressing and pushing. We've seen these in some games of skill in arcades. They're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so they're best kept indoors.The body is black plastic, an...

SKU: SF-COM-11274

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the midd...

SKU: SF-COM-11275

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the midd...

SKU: SF-COM-09181

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the midd...

SKU: AF-3104

This Mini Illuminated Momentary Power Button it an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project.  The tact switch is about the same size as 6mm tactile switc...

SKU: AF-1478

A 16mm illuminated pushbutton with a built-in white LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: AF-1479

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-1477

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...

SKU: AF-1476

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the lig...

SKU: AF-1444

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the l...

SKU: AF-1443

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: AF-1442

A 16mm illuminated pushbutton with a built-in red LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the ligh...

SKU: AF-1441

A 16mm illuminated pushbutton with a built-in yellow LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independent...