All Products

SKU: DF-SEN0523

This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outputs a signal. It works over distances up to 4 metres with a fast 0.5ms response t...

SKU: DF-FIT0658

This compact 5V inductive proximity switch detects metal objects at distances up to 4mm without physical contact. It features an NPN normally-open output, a fast response time under 1ms, and a 1,000Hz switching frequency — making it reliable for high-speed detection applications. With an IP67 pr...

SKU: DF-FIT0880 · MPN: FIT0880

This compact COB LED strip provides bright red illumination from a 5V DC supply, making it handy for small lighting, display and battery-powered maker projects. It uses 16 LEDs under silicone encapsulation to help protect the chips and support a longer service life.The strip is designed for unifo...

SKU: DF-DFR0937

This wireless LED lamp pack uses magnetic resonance coupling technology to power 10 LEDs without any wires or batteries. A transmitting coil creates a non-radiative magnetic field that wirelessly transfers energy through air, paper, or plastic to small receiver coils built into each LED bead — li...

SKU: DF-FIT0750

This 50cm programmable RGB LED strip uses SK6812 (5050) COB LEDs to produce bright, uniform, full-colour light with no visible hotspots. With 166 individually addressable LEDs packed into just half a metre, it delivers smooth colour blending and high-density illumination. The strip runs on 5V DC...

SKU: TB-SY4036

This small, lightweight 5V SPST reed relay is designed for PCB mounting in a standard DIL (Dual In-Line) package. It switches up to 1A DC with a low 0.1W power consumption, making it suitable for low-power switching applications in sensor circuits, security systems, and instrumentation. Key Feat...

SKU: AF-6105 · MPN: ADA6105

This compact 3cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power source. The fan includes front and back protective grills along with m...

SKU: AF-6101 · MPN: ADA6101

This 4cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power source. The fan includes front and back protective grills along with mounting ...

SKU: AF-6099 · MPN: ADA6099

This 5cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power source. The fan includes front and back protective grills along with mounting ...

SKU: AF-6103 · MPN: ADA6103

A compact 60mm USB-powered cooling fan that provides instant airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to wire the fan directly to a 5V power source. While there's no built-in PWM or feed...

SKU: AF-6120 · MPN: ADA6120

A 70mm USB-powered cooling fan that delivers reliable airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to wire the fan directly to a 5V power source. While there's no built-in PWM or feedback pi...

SKU: AF-6102 · MPN: ADA6102

An 80mm USB-powered cooling fan that provides strong airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to wire the fan directly to a 5V power source. While there's no built-in PWM or feedback pin...

SKU: AF-6104 · MPN: ADA6104

The largest fan in the 5V USB range, this 90mm cooling fan provides maximum airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to wire the fan directly to a 5V power source. While there's no built...

SKU: DF-FIT0837 · MPN: FIT0837

Add red decorative lighting to very tight spaces with this ultra-narrow flexible LED strip from DFRobot. At only 2.5mm wide and 1mm thick, it is designed for miniature models, compact electronics, detailed decorative layouts and other builds where standard LED strips are too bulky.The 1-metre str...

SKU: LB-LS8111

This compact USB fan speed controller gives you simple, stepless adjustment over a USB-powered fan, so you can fine-tune airflow for cooling or comfort.It is built with a durable aluminium body and is suited to laptop, desktop and mobile cooling setups where adjustable fan speed is useful.The con...

SKU: SF-COM-10063

This 5-way tactile switch provides joystick-like directional input in a tiny surface-mount package. It supports four directional movements (up, down, left, right) plus a centre press, making it ideal for menu navigation, cursor control, and compact user interfaces where a full-size joystick won't...

SKU: AF-3456

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with onboard 5V regulators, which typically need 1–2V of headroom above their output...

SKU: DF-TEL0143

A wideband 5G antenna covering 600–6000MHz, compatible with all major cellular frequency bands (5G/4G/3G/2G) as well as Wi-Fi. Features an SMA connector with IPEX4 pigtail for easy connection to 5G modules, routers, and access points. The antenna supports 90° bending for flexible pointing and po...

SKU: LB-LR0309-1

A bulk pack of 600 metal film resistors in 30 common values, with 20 of each. All resistors are ¼W rated with 1% tolerance. Each value is grouped on a labelled strip for easy identification and storage. Key Features 30 Common Values – From 10Ω to 1MΩ 20 of Each Value – 600 resistors total 1%...

SKU: DF-DFR1025

A high-efficiency 60W DC-DC buck converter module that steps down 9–15V input to an adjustable 0.6–5.1V output at up to 18A. Ideal for powering WS2812 RGB LED strips, servos, and other devices requiring low voltage with high current from a 12V or 11.1V lithium battery source. Features 92% typica...